Operation Manual

12
【When starting engine with kick starter】
 After step 1~5 is completed, press the kick starter forcefully by foot with the throttle valve handle
at the close position.
 If engine is difficult to start with the kick starter when the engine is cold, rotating the throttle valve
1/8~1/4 turns will make the start easier.
 Put the kick starter back to its original position after the engine has been started.
CAUTION:
 If engine can not be started after starter motor running for 3~5 seconds, turn the throttle valve
handle 1/8~1/4 turns, and then press starter button again for an ease start.
 In order to avoid damaging the starter motor, please do not press the starter button continuously
over 15 seconds.
 If engine still can not be started after pressing starter button over 15 seconds, stop and wait
for 10 seconds before start it again.
 It is harder to get the engine started after the motorcycle has been left idle for a long time or
after refueling only after the fuel has been depleted. Then, it is necessary to press starting
lever or starter button several times, and keep the throttle valve handle at the close position to
start the engine.
 It may need several minutes to warm up engine if it is a cold start.
 Exhaust contains harmful gases (CO), therefore please start the engine at a well ventilated
place.
CAUTION:
 Firmly support the motorcycle with the main parking stand before starting the engine with the
kick starter arm.
 Start engine with the kick starter arm occasionally to prevent it from loosing its function
because of unused for a long time.
1/4
1/8