Operation Manual

9. RIDING THE MOTORCYCLE

§SET UP RIDING §

Check the brakes and tire pressure before riding.

1. Squeeze the clutch lever fully, then push shift

pedal down to engage the 1st gear.

2. Then release the clutch lever slowly, and at

the same time, open the throttle gradually, the

motorcycle will move.

 Change the gear position according to the

driving speed.

 The relationship between speed and gear

position is on the right table.

 Change the gear position according with the

table can get the good performance and fuel

economy of the motorcycle.

CAUTION:

 After the engine was started and before

riding, don’t operate the throttle to rise up

the engine speed.

CAUTION:

During the first 1000km, it is better to drive in low speed for running the engine in good condition

and long life.

 Change the engine oil and clean the oil filter screen after first 300km.

 It is better to drive in low speed after replacing the engine.

 Warm up the engine before start riding.

Speed

gear

20 40 60 80 100 120 140

gear