User's Manual

ManualsBrandsSYMA MODEL AIRCRAFT INDUSTRIAL ManualsCamera & PhotoWifi-camera-1

4CH 2.4G REMOTE CONTROL QUADCOPTER

AGES 14+

INSTRUCTION MANUAL

IMPLEMENT STANDARD: GB/T26701-2011

The materials and specification mentioned in this instruction manual or the parts inside this package is

for reference only.Our company wont be responsible for any adaption of the outer package.Nor shall

we keep our customers informed in advance.Any information updates or changes,please be subject to

our website .

Four-axis structure is applied,which makes the quadcopter more flexible and rapid

when flying.It has the characteristics of wind-resistant and can be flied indoor or

outdoor.

Built-in 6 axis gyroscope for precise hovering in the sky.

Modular design structure is applied, more simple for assembly and convenient for

maintenance.

With 360°3D eversion function and throwing flight function .

Added headless function; WIFI real-time aerial photo

Main characteristics

Summary of content (8 pages)

PAGE 1
AGES 14+ X8W 4CH 2.4G REMOTE CONTROL QUADCOPTER INSTRUCTION MANUAL 2 IMPLEMENT STANDARD: GB/T26701-2011 Main characteristics Four-axis structure is applied,which makes the quadcopter more flexible and rapid when flying.It has the characteristics of wind-resistant and can be flied indoor or outdoor. Built-in 6 axis gyroscope for precise hovering in the sky. Modular design structure is applied, more simple for assembly and convenient for maintenance.
PAGE 2
Safety regulations 1. Please put smaller parts of the quadcopter in the place where children cant reach, avoiding from accidents. 2. Power of this quadcopter is adequate. Therefore, when flying for the first time, it should push remote controls right/left variable-speed joystick slowly, avoiding from collisions caused by rising quadcopter rapidly. 3. After flying，please turn off the power of quadcopter and controller, also take out the batteries from controller. 4.
PAGE 3
Get to know your transmitter Introduction of transmitter: Indicator Antenna 3D Eversion High/Low speed & Headless mode switch Right control lever Left control lever Forward and backward trimmer Left Fine -tuning (Mode 1) Sideward Finetuning (Mode 2) Mode 1 / 2 switch Sideward Finetuning (Mode 1) Left Fine tuning(Mode 2) Power ON/OFF Battery Cover 4 X AA(LR06) 1.5V Batteries （Batteries not included） Installation methods of battery: Open back battery cover of remote control, and put 4 No.
PAGE 4
Remote control keypad and lcd manual A B 01.Sideward Fine-tuning :Power-on start in the centering.(Be turn Left/Right Fine-tuning in Mode2) 02.Forward/Backward fine-tuning:Power-on start in the middle. 03.Turn Left/Right fine-tuning:Power-on start in centering.(Be Sidewoard Fly Fine-tuning in Mode2) 04.Forward shows:Power-on start in the lowest level.(At the center spuare) 05.Backward shows:Power-on start in the lowest level.(At the center spuare) 06.
PAGE 5
Installation steps of quadcopters safety guard Figure 1 Figure 2 Figure 3 1. Pull out decorating parts as shown in Figure (1). 2. Press down decorating parts as shown in Figure (2) and insert blade protective frame into fuselage interface. 3. Twist two screws of every parts as shown in Figure（3）. Note: Without blade protective frame,rolling effect in flight will be better. Installation steps of quadcopters stands Figure 1 1.Insert stands into the quadcopter body as figure(1). Figure 2 2.
PAGE 6
WIFI software download and installation 1.Install software For Android phone, please download from www.symatoys.com or scan twodimension code to install SYMA FPV software. For iphone IOS, please download from APP STORE to install SYMA FPV software or scan two-dimension code to install SYMA FPV software. Warm remind: Two-dimension code is provided in color box packing and back cover of specification to scan. 2. Connection Description When connecting with model power, indicator light of FPV is green light.
PAGE 7
Controller modes & instructions The transmitter built-in two modes, Mode 1 & Mode 2, in line with different customers usage pattern. Keep pushing button B to right, than turn on the transmitter power to change Mode 1 or Mode 2. MODE 1 Operating direction Hover up and down Forward and backward Push the throttle up or down, the quadcopter flies upward or downward. Push the direction lever up or down, the quadcopter flies forward or backward.
PAGE 8
Fine-tuning operation Forward/Backward fine-tuning When the quadcopter keeps flying forward / backward, you can correct it by pressing fine-tuning button down / up. Sideward fly fine-tuning When the quadcopter keeps flying to left / right side, you can correct it by pressing the fine-tuning button right / left. Turn left/right fine-tuning When the quadcopter keeps rotating to left / right, you can correct it by pressing the finetuning button right / left.