User's Guide
Table Of Contents
- MC3000 User Guide
- Revision History
- Contents
- About This Guide
- Getting Started
- Introduction
- Unpacking the Mobile Computer
- Accessories
- Parts
- Mobile Computer Startup
- Battery Charging
- Spare Battery Charging
- Stylus
- Starting the Mobile Computer
- Waking the Mobile Computer
- Main Battery Removal
- Strap/Door Assembly Removal and Replacement (MC3000-K/R)
- Strap/Door Assembly Removal and Replacement (MC3000-G)
- Operating the MC3000
- Using Bluetooth
- Accessories
- Maintenance & Troubleshooting
- Technical Specifications
- Keypad Functions/Special Characters
- Regulatory
- Glossary
- Index
- Tell Us What You Think...
Using Bluetooth 3-13
2. When prompted to bond with the remote device the PIN Code Request window appears.
Figure 3-17. PIN Code Request Window
3. In the PIN Code: text box, enter the same PIN that was entered on the device requesting the bond. The PIN must be between
1 and 16 characters.
4. In the Device Name: text box, edit the name of the device requesting the bond, if desired.
5. Tap OK.
6. The bond is created and the mobile computer can now exchange information with the other device.
Discovering Services
Before services can be used, you must first discover remote devices and then bond to those devices.
To determine what services are available on a bonded remote device:
1. Tap the Bluetooth icon and select Show BTExplorer.
2. In BTExplorer window, tap and hold on the remote device and select Explore from the pop-up menu.
Figure 3-18. Discovering Services