User's Guide
Table Of Contents
- MC3000 User Guide
- Revision History
- Contents
- About This Guide
- Getting Started
- Introduction
- Unpacking the Mobile Computer
- Accessories
- Parts
- Mobile Computer Startup
- Battery Charging
- Spare Battery Charging
- Stylus
- Starting the Mobile Computer
- Waking the Mobile Computer
- Main Battery Removal
- Strap/Door Assembly Removal and Replacement (MC3000-K/R)
- Strap/Door Assembly Removal and Replacement (MC3000-G)
- Operating the MC3000
- Using Bluetooth
- Accessories
- Maintenance & Troubleshooting
- Technical Specifications
- Keypad Functions/Special Characters
- Regulatory
- Glossary
- Index
- Tell Us What You Think...
Using Bluetooth 3-17
6. Tap and hold on Dial-up Networking and select Connect from the pop-up menu. The Select Dial-up Networking Entry window
appears.
Figure 3-21. Select Dial-up Networking Entry Window
If a dial-up entry is not listed, see Add a Dial-up Entry on page 3-18.
7. Select a dial-up entry.
8. Tap OK. The mobile computer begins to communicate with the phone. If required, the phone requests permission to
communicate with the mobile computer.Z
9. Confirm the connection on the phone. The Network Log On window appears.
Figure 3-22. Network Log On Window
10. In the User name: text box, enter the user name for this connection.
11. In the Password: text box, enter the password for this connection.
12. In the Domain: text box, enter the domain for this connection, if required.
13. Tap OK.