Nokia 6103 User Guide 9245707 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-161 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
Java is a trademark of Sun Microsystems, Inc. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. This Nokia device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Contents For your safety ..................................................................................................... 9 General information.......................................................................................... 13 Overview of functions ............................................................................................................................. 13 Access codes ..........................................................................................................
4. Write text....................................................................................................... 30 Settings ....................................................................................................................................................... 30 Predictive text input................................................................................................................................ 30 Traditional text input ....................................................
Business cards ........................................................................................................................................... 58 My presence............................................................................................................................................... 59 Subscribed names..................................................................................................................................... 60 Settings ..................................
11. Gallery ......................................................................................................... 81 12. Media........................................................................................................... 82 Camera......................................................................................................................................................... 82 Radio ......................................................................................................
Set up browsing ..................................................................................................................................... Connect to a service ............................................................................................................................. Browse pages.......................................................................................................................................... Appearance settings ............................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone.
■ About your device The wireless device described in this guide is approved for use on the EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect the privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.
Internet services, content and application download, and synchronization with a remote Internet server, require network support for these technologies. ■ Shared memory The phone has two memories. The following features may share the first memory: contacts, text messages, multimedia messages (without attachments), instant messaging, groups, voice commands, calendar, and to-do notes.
General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also supports the following functions: • Enhanced data rates for GSM evolution (EDGE), see “Packet data (EGPRS),” p. 75 • Extensible hypertext markup language (XHTML), see “Web,” p. 107 • Audio messaging, see “Nokia Xpress audio messaging,” p. 41 • Instant messaging, see “Instant messaging,” p.
■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 78. PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 78.
the codes are not supplied with the SIM card, contact your local service provider for the codes. Barring password The barring password (4 digits) is required when using the Call barring service. See “Security,” p. 78. ■ Configuration settings service To use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings.
To discard the received settings, select Exit or Show > Discard. To edit the settings, see “Configuration,” p. 77. ■ Download content and applications You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider.
1. Get started ■ Open the fold When you open the fold of the phone, it opens up to approximately 155 degrees. Do not try to force the fold open more. ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
To remove the back cover of the phone press the release button (1), and slide the back cover to remove it from the phone (2). Remove the battery as shown(3). Release the SIM card holder (4). Insert the SIM card (5). Make sure that the SIM card is properly inserted, and that the golden contact area on the card is facing downwards. Close the SIM card holder (6) and press it until it snaps into position. Replace the battery (7). Observe the battery contacts. Always use original Nokia batteries.
■ Charge the battery Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3, AC-4, and DC-4 charger, and from AC-1, ACP-7, ACP-12, and LCH-12 charger when used with the charger adapter CA-44.
Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to service provider support ," p. 77, and “Configuration settings service,” p. 15. ■ Normal operating position Use the phone only in its normal operating position. Your device has an external antenna.
2. Your phone ■ Keys and parts • Earpiece (1) • Main display (2) • Left selection key (3) • Middle selection key (4) • Right selection key (5) • Volume key (6) • 4-way navigation key (7) • Call key (8) • Push to talk (PTT) and camera release key (9) • Infrared (IR) port (10) • End and power key (11) • Charger connector (12) • Pop-PortTM connector (13) • Microphone (14) Copyright © 2006 Nokia. All rights reserved.
• Loudspeaker (15) • Camera lens (16) • Mini display (17) Warning: The side keys (6) and (9) and the antenna cap of this device may contain nickel. These parts are not designed for prolonged contact with the skin. Continuous exposure to nickel on the skin may lead to a nickel allergy. ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
• The name of the network, or if the phone is not in service, it is indicated by a text note • The time, the active profile, and the alarm clock or calendar note alerts When you have an incoming call, the caller’s name or number is shown if it is identified.
Personal shortcut list The left selection key is Go to. To view the functions in the personal shortcut list, select Go to. To activate a function select it. To view a list with available functions, select Go to > Options > Select options. To add a function to the shortcut list, select Mark. To remove a function from the list, select Unmark. To rearrange the functions on your personal shortcut list, select Go to > Options > Organise.
Power saving A digital clock view overwrites the display when no function of the phone has been used for a certain period of time. To activate the power saver, see Power saver in “Main display,” p. 68, and “Mini display,” p. 69. To deactivate the power saver, open the fold, or press any key. Indicators You received one or several text or picture messages. See “Read and reply to a SMS message,” p. 34. You received one or several multimedia messages. See “Read and reply to a multimedia message,” p. 38.
A packet data connection is established. See “Packet data (EGPRS),” p. 75 and “Browse pages,” p. 108. The packet data connection is suspended (on hold), for example, if there is an incoming or outgoing call during a packet data dial-up connection. When the infrared connection is activated, the indicator is shown continuously. Bluetooth connection indicator. See “Bluetooth wireless technology,”, p. 72.
3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press * twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key, or close the phone.
■ Answer or reject a call To answer an incoming call, press the call key, or open the phone. To end the call, press the end key, or close the phone. To reject an incoming call when the phone is open, press the end key, or close the phone. To reject an incoming call when the phone is closed, open the phone, and press the end key within 1.5 seconds. To mute the ringing tone, press one of the volume keys, or select Silence.
Call options are Mute or Unmute, Contacts, Menu, Record, Lock keypad, Auto volume on, Loudspeaker or Handset.
4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you are writing text, predictive text input is indicated by and traditional text input by at the top left of the display. , , or appear next to the text input indicator, indicating the character case.
1. Start writing a word using the 2 to 9 keys. Press each key only once for a single letter. The word changes after each keypress. 2. When you have finished writing the word and it is correct, to confirm it, press 0 to add a space, or press any of the navigation keys. Press a navigation key to move the cursor. If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, confirm it.
5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. 2. Scroll through the menu, and select a submenu (for example, Settings). 3. If the menu contains submenus, select the one that you want (for example, Call). 4. If the selected menu contains further submenus, select the one that you want (for example, Anykey answer). 5.
6. Messages The message services can only be used if they are supported by your network or your service provider. Note: When sending messages, your phone may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.
Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.
1. To view a new message, select Show. To view it later, select Exit. To read the message later, select Menu > Messages > Inbox. If more than one message is received, select the message that you want to read. indicates an unread message. 2. While reading a message, select Options, and delete or forward the message; edit the message as a text message or an SMS e-mail, rename the message you are reading, or move it to another folder; or view or extract message details.
■ Multimedia messages A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message. You cannot receive multimedia messages during a call, a game, another Java application, or an active browsing session over GSM data.
Business card or Calendar note — to insert a business card or a calendar note in the message. Slide — to insert a slide to the message. Your phone supports multimedia messages that contain several pages (slides). Each slide can contain text, one image, a calendar note, a business card, and one sound clip. To open a desired slide if the message contains several slides, select Options > Previous slide, Next slide, or Slide list. To set the interval between the slides, select Options > Slide timing.
If you select Save sent messages > Yes, the sent message is saved in the Sent items folder. See “Multimedia,” p. 53. When the message is sent, it is not an indication that the message has been received at the intended destination. Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded. Read and reply to a multimedia message Important: Exercise caution when opening messages.
3. To reply to the message, select Options > Reply > Text message, Multimedia msg., Flash message, or Audio message. Enter the reply message, and select Send. You can send the reply message only to the person who sent you the original message. Select Options to access available options. ■ Memory full When you have received a new text message and the message memory is full, blinks and Text msgs. memory full. Delete msgs. is shown. Select No, and delete some messages from a folder.
If you select Menu > Messages > Message settings > Text messages > Save sent messages > Yes, and Menu > Messages > Message settings > Multimedia msgs. > Save sent messages > Yes, the sent messages are saved in the Sent items folder. To save the text message that you are writing and wish to send later in the Saved items folder, select Options > Save message > Saved text msgs.. For multimedia messages, select the option Save message. indicates unsent messages.
Receive a flash message A received flash message is not automatically saved. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail. To save the message, select Save and the folder in which you want to save the message. ■ Nokia Xpress audio messaging With this menu, use the multimedia message service to create and send a voice message in a convenient way.
4. Select the contact from the list, enter the recipient’s phone number or e-mail address, or search for it in Contacts. Select OK, and the message is moved to the Outbox folder for sending. Receive an audio message When your phone receives an audio message, 1 audio message received is shown. Select Play to open the message or Show > Play if there are more than one message received. Select Options to see the options available. To listen to the message later, select Exit.
Depending on the network, the active instant messaging conversation may consume the phone battery faster, and you may need to connect the phone to a charger. Access the instant messaging menu To access the menu while still offline, select Menu > Messages > Instant messages. If more than one set of connection settings for the instant messaging service is available, select the desired one. If there is only one set defined, it is selected automatically.
Start an instant messaging session Open the Instant messages menu, and connect to the service. Start the service in different ways. Conversations — to view the list of new and read instant messages or invitations for instant messaging during the active instant messaging session. Scroll to the message or invitation that you want, and select Open to read the message. indicates the new and read group messages. the read instant messages. indicates the new and indicates the invitations.
Search > Users or Groups — to search for other instant messaging users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group or by group name, topic, or ID. To start the conversation when you have found the user or the group that you want, select Options > Chat or Join group. Start a conversation from Contacts, see “View the subscribed names,” p. 61.
IM contacts, the sender ID is displayed. To save a new contact that is not in the phone memory, select Options > Save contact. Participate in a conversation To join or start an instant messaging session, select Write. Write your message, and select Send or press the call key to send it. Select Options > View conversation, Save contact, Group members, Block contact, or End conversation. Edit your availability status 1. Open the Instant messages menu, and connect to the instant messaging service. 2.
Contacts for instant messaging To add contacts to the instant messaging contacts list, connect to the instant messaging service, and select IM contacts. To add a contact to the list, select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually, Search from serv., Copy from server, or By mobile number.
Public groups Groups — You can bookmark public groups that your service provider may maintain. Connect to the instant messaging service, and select Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups.
“Configuration settings service,” p. 15. You can also enter the settings manually. See “Configuration,” p. 77. To activate the e-mail settings, select Menu > Messages > Message settings > E-mail messages. See “E-mail,” p. 54. This application does not support keypad tones. Write and send an e-mail 1. Select Menu > Messages > E-mail > Create e-mail. 2. Enter the recipient’s e-mail address, a subject, and the e-mail message. To attach a file to the e-mail, select Options > Attach and the file in Gallery. 3.
3. Select the new message in Inbox. To view it later, select Back. indicates an unread message. Read and reply to e-mail Important: Excercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. Select Menu > Messages > E-mail > Inbox and the desired message. While reading the message, select Options to view the available options. To reply to an e-mail, select Reply > Original text or Empty screen.
Delete e-mail messages Select Menu > Messages > E-mail > Options > Manage folder and the desired folder. Mark the messages that you want to delete. To delete them, select Options > Delete. Deleting an e-mail from your phone does not delete it from the e-mail server. To set the phone to delete the e-mail also from the e-mail server, select Menu > Messages > E-mail > Options > Extra settings > Leave copy: > Delete retr. msgs.
■ Service commands Select Menu > Messages > Service commands. Write and send service requests (also known as USSD commands) to your service provider, such as activation commands for network services. ■ Delete messages To delete all messages from a folder, select Menu > Messages > Delete messages and the folder from which you want to delete the messages. Select Yes, and if the folder contains unread messages, the phone asks whether you want to delete them also. Select Yes again.
Save sent messages > Yes — Set the phone to save the sent text messages in the Sent items folder. Automatic resending > On — The phone automatically attempts to resend a text message, if the sending has failed. Multimedia The message settings affect the sending, receiving, and viewing of multimedia messages. Select Menu > Messages > Message settings > Multimedia msgs.
Incoming multimedia messages > Retrieve, Retrieve manually, or Reject — to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception Configuration settings > Configuration — Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and select a multimedia messaging service account contained in the active configuration settings.
Reply-to address — Enter the e-mail address to which you want the replies to be sent. SMTP user name — Enter the name that you want to use for outgoing mail. SMTP password — Enter the password that you want to use for outgoing mail. Display terminal window — Select Yes to perform manual user authentication for intranet connections. Incoming server type — Select either POP3 or IMAP4, depending on the type of email system that you are using. If both types are supported, select IMAP4.
7. Contacts You can save names and phone numbers (Contacts) in the phone memory and in the SIM card memory. See “Settings,” p. 62. The phone memory may save contacts with numbers and text items. You can also save an image for a certain number of names. Names and numbers saved in the SIM card memory, are indicated by . ■ Search for a contact Select Menu > Contacts > Names > Options > Search. Scroll through the list of contacts or enter the first letter of the name for which you are searching.
When you select a name (for example, to make a call), the default number is used unless you select another number. 1. Make sure that the memory in use is either Phone or Phone and SIM. See “Settings,” p. 62. 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail. 3. To add a number, select Number and one of the number types. To add another detail select a text type or an image from Gallery.
■ Edit contact details 1. Search for the contact you want to edit, select Details, and scroll to the desired name, number, text item, or image. 2. To edit a name, number, or text item, or to change an image, select Options > Edit name, Edit number, Edit detail, or Change image. You cannot edit an ID when it is on the IM contacts or Subscribed names list.
To send a business card, search for the contact whose information you want to send, and select Details > Options > Send bus. card > Via multimedia, Via text message, Via infrared or Via Bluetooth. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.
Connect to 'My presence' service or Disconnect from service — to connect to or disconnect from the service. View my presence — to view the status in Private pres. and Public presence. Edit my presence — to change your presence status. Select My availability, My presence message, My presence logo, or Show to.
3. Select a contact from the list and if the contact has an user ID saved, the contact is added to the subscribed names list. View the subscribed names To view the presence information, see “Search for a contact,” p. 56. 1. Select Menu > Contacts > Subscribed names. The status information of the first contact on the subscribed names list is displayed.
■ Settings Select Menu > Contacts > Settings and from the following options: Memory in use — to select SIM card or phone memory for your contacts Contacts view — to select how the names and numbers in contacts are displayed Memory status — to view the free and used memory capacity ■ Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. Add and manage voice tags Save or copy the contacts to the phone memory for which you want to add a voice tag. You can also add voice tags to the names in the SIM card, but if you replace your SIM card with a new one, you must first delete the old voice tags before you can add new ones. 1. Search for the contact to which you want to add a voice tag.
2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. ■ Speed dials To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change.
8. Call register The phone registers the phone numbers of identified missed, received, and dialed calls; the message recipients; and the approximate length of your calls. The phone registers if it is switched on and within the network’s service area, and the network supports these functions.
9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles. Scroll to a profile, and select it. To activate the selected profile, select Activate. To set the profile to be active until a certain time up to 24 hours, select Timed and set the time the profile setting shall end.
Theme downloads — to open a list of links to download more themes. See “Download files,” p. 112. ■ Tones You can change the settings of the selected active profile. Select Menu > Settings > Tones. Select and change the available tone options. You can find the same settings in the Profiles menu. See “Profiles,” p. 66. If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.
shortcut function from the key, select (empty). To reassign a function for the key, select Assign. This menu may not be shown, depending on your service provider. Voice commands — to activate phone functions by saying a voice tag. Select a folder, scroll to a function to which you want to add a voice tag, and select Add. indicates a voice tag. To add a voice command, see “Add and manage voice tags,” p. 63. To activate a voice command, see “Make a call with a voice tag,” p. 63.
Colour schemes — to change the color in some display components, for example, menu background color and signal and battery bar colors Idle state font colour — to select the color for the texts on the display in the standby mode Operator logo — to set your phone to display or hide the operator logo. The menu is dimmed, if you have not saved the operator logo. For more information on availability of an operator logo, contact your network operator or service provider.
■ Call Select Menu > Settings > Call and from the following options: Automatic volume control — to set the phone to automatically adjust the speaker volume according to the background noise Call divert (network service) — to divert your incoming calls. You may not be able to divert your call, if some call barring functions are active. See Call barring service in “Security,” p. 78.
■ Phone Select Menu > Settings > Phone and from the following options: Phone language — to set the display and writing language Memory status — to view the free memory and the used memory in Gallery, Messages, and Applications Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and you can set the time from 5 seconds to 60 minutes.
Start-up tone — to select whether the phone plays a start-up tone when the phone is switched on ■ Connectivity You can connect your phone to compatible devices using an infrared connection, or Bluetooth wireless technology. You can also define the settings for packet data dial-up connections. Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.
Set up a Bluetooth connection Select Menu > Settings > Connectivity > Bluetooth and from the following options: Bluetooth > On or Off — to activate or deactivate the Bluetooth function. indicates an active Bluetooth connection. Search for audio enhancements — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone. Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range.
If you are concerned about security, turn off Bluetooth or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree. Infrared You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. You can send or receive data to or from a compatible phone or data device (for example, a computer) through the IR port of your phone.
Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service which allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks such as the Internet. The applications that may use packet data are MMS, browsing sessions, e-mail, Push to talk, remote SyncML, Java application downloading, and the PC dial-up.
Select Packet data access point, and enter the access point name (APN) to establish a connection to an EGPRS network. You can also set the dial-up service settings (APN) on your PC using the Nokia Modem Options software. See “PC Suite,” p. 119. If you have set the settings both on the PC and on your phone, the PC settings are used. ■ Enhancements This menu is shown only if the phone is or has been connected to a compatible mobile enhancement. Select Menu > Settings > Enhancements.
■ Configuration You can configure your phone with settings that are required for certain services to function correctly. The services are browser, multimedia messaging, remote Internet server synchronization, presence, push to talk and e-mail application. Get the settings from your SIM card, from a service provider as a configuration message, or enter your personal settings manually. You can store configuration settings from up to 20 service providers in the phone and manage them within this menu.
Personal configuration settings — to add new personal accounts for various services manually, and to activate or delete them. To add a new personal account if you have not added any, select Add new; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate.
code when SIM card memory is selected and you want to change the memory in use.
10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 112. Copyright © 2006 Nokia. All rights reserved.
11. Gallery In this menu you can manage graphics, images, recordings, video clips, themes, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.
12. Media Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded. ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Your device supports an image capture resolution of 640 x 480 pixel.
Record a video clip Select Menu > Media > Camera. To select the video mode, scroll left or right, or select Options > Video; select Record or press the camera release key. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. To view the options, select Options. ■ Radio The FM radio depends on an antenna other than the wireless devices antenna.
3. Enter the name of the channel, and select OK. Listen to the radio Select Menu > Media > Radio. To scroll to the desired channel, select or or press the headset key To select a radio channel location, briefly press the corresponding number keys. Select Options and from the following options: Switch off — to turn off the radio Save channel — to save a new channel, and enter the channels name Channels — to select the list of saved channels.
■ Recorder You can record pieces of speech, sound, or an active call for 5 minutes. The recorder cannot be used when a data call or packet data connection is active. Record sound 1. Select Menu > Media > Recorder. To use the graphical keys, , the desired key, and select it. , or , on the display, scroll left or right to 2. To start the recording, select . To start the recording during a call, select Options > Record.
13. Organiser ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. ■ Calendar Select Menu >Organiser > Calendar. The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view.
select View. To stop the alarm for approximately 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. ■ To-do list To save notes for tasks that you must do, select Menu > Organiser > To-do list. To create a note if no note is added, select Add note; otherwise, select Options > Add. Write the note, and select the priority, the deadline, and the alarm type for the note. Then select Save. To view a note, scroll to it, and select View.
■ Synchronization Synchronization allows you to save your calendar and Contacts data on a remote Internet server (network service) or on a compatible PC. If you want to save data on the remote Internet server, to synchronize your phone, start the synchronization from your phone. To synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC, start the synchronization from the PC. The contact data in your SIM card is not synchronized.
3. Select Menu > Organiser > Sync > Server sync > Synchronise. The marked data of the active set is synchronized after confirmation. Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete, if the contacts or calendar are full. Synchronization settings You may receive the configuration settings required for synchronization as a configuration message from the network operator or service provider.
Synchronize from a compatible PC To synchronize Contacts, Calendar, and Notes from a compatible PC, use an IR, a Bluetooth technology, or data cable connection. You also need Nokia PC Suite software of your phone installed on the PC. Start the synchronization from the PC using Nokia PC Suite. ■ Calculator The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root and converts currency values.
■ Stopwatch To measure time, take intermediate times, or take lap times, use the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Select Menu > Organiser > Stopwatch and from the following options: Split timing — to take intermediate times.
when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer. If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up. To stop the alarm, press any key. If no key is pressed, the alarm automatically stops within 30 seconds. To stop the alarm and to delete the note text, select Exit.
14. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see “Other application options,” p. 95. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu. See “Bookmarks,” p. 111.
■ Collection Your phone software includes some Java applications specially designed for this Nokia phone. Launch an application Select Menu > Applications > Collection. Scroll to an application, and select Open.
Download an application Your phone supports J2METM Java applications. Make sure that the application is compatible with your phone before downloading it. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. You can download new Java applications in different ways. Select Menu > Applications > Options > Downloads > App. downloads. The list of available bookmarks is shown.
15. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect to, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the person or group you are calling does not have to answer the phone.
■ Push to talk menu Select Menu > Push to talk. • To connect to or disconnect from the PTT service, select Switch PTT on or Switch PTT off. • To view the received callback requests, select Callback inbox. • To view the list of PTT groups, select Group list. • To view the list of contacts to which you have added the PTT address received from the service provider, select Contacts list. • To add a new PTT group to the phone, select Add group. • To set the PTT settings for use, select PTT settings.
■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive dial out calls, group calls or one-to-one calls. One-to-one calls are calls you make to only one person. Make a dial out PTT call For a dial-out PTT call you can select multiple PTT contacts from the contact list.
hold the PTT key to talk to the joined contacts. Release the PTT key to hear the response. Press the end-key to terminate the dial-out call. Make a group call To make a call to the default group, press the PTT key. A tone sounds, indicating that the access is granted, and the phone displays your nickname and group name. To make a call to a non default group, select Group list in the PTT menu, scroll to the desired group, and press the PTT key.
Receive a PTT call A short tone notifies you of an incoming group and one-to-one call. When receiving a group call, the group name and the nickname of the caller are displayed. When receiving a one-to-one call from a person whose information you have saved in Contacts, the saved name is displayed if identified; otherwise, only the nickname of the caller is displayed. You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one calls.
Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send callback. • To send a callback request from Contacts, search for the desired contact, select Options > Contact details, scroll to the PTT address, and select Options > Send callback.
Save the callback request sender 1. To open the Callback inbox, select View. The list of nicknames of the persons who have sent you callback requests is shown. 2. To view the sender's PTT address, select Options > View PTT address. To save a new contact or to add the PTT address to a contact, select Options > Save as or Add to contact.
Each member in the group is identified by a nickname, which is shown as a caller identification. Group members can choose a nickname for themselves in each group. Groups are registered with a URL address. One user registers the group URL in the network by joining the group session the first time. There are three types of PTT groups: • Provisioned groups are closed groups that allow only selected participants provisioned by the service provider to join. • Ad hoc groups are groups that the users can create.
PTT key to make a group call, the default group is called if you have not scrolled to any other group or contact. To send an invitation to the group, select Yes when the phone requests it. You can send the invitation using a text message, Bluetooth technology or IR. The members you invite to the public groups can also invite more members to the group. Manual — to join an existing group. Enter the group address. Select Default, Listened, or Inactive.
■ PTT settings There are two kinds of PTT settings: settings for connecting to the service and settings for use. You may receive the settings for connecting to the service from your network operator or service provider. See “Configuration settings service,” p. 15. You can enter the settings manually. See “Configuration,” p. 77. To select the settings for connecting to the service, select Menu > Push to talk > Config.
16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See “Set up browsing,” p. 107. Select Account and a browsing service account contained in the active configuration settings. Select Display terminal window > Yes to perform manual user authentication for intranet connections.
during a packet data connection, is shown on the top right of the display to indicate that the packet data connection is suspended (on hold). After a call the phone tries to reconnect the packet data connection. Browse with phone keys Use the navigation keys to browse through the page. To select a highlighted item, press the call key, or select Select. To enter letters and numbers, press the keys, 0 to 9. To enter special characters, press *. Options while browsing Nokia.
■ Appearance settings While browsing, select Options > Other options > Appear. settings; or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options: Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is abbreviated. Font size > Extra small, Small, or Medium — to set the font size Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures.
■ Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 114. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject. ■ Scripts over secure connection You can select whether to allow the running of scripts from a secure page.
3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or save the bookmark to a folder. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed.
example, news headlines) and they may contain a text message or an address of a service. To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox. To access the Service inbox while browsing, select Options > Other options > Service inbox.
■ Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache, while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache. ■ Positioning information The network may send you a location request.
security module, which may be available on your SIM card. For more information, contact your service provider. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider.
Certificates Important: Note that even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime.
Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign, which may include the amount and date, is shown. Check that the header text is Read and that the digital signature icon shown.
17. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
18. PC connectivity You can send and receive email, and access the Internet when your phone is connected to a compatible PC through an infrared or a data cable (CA-42) connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ PC Suite With PC Suite you can synchronize Contacts, calendar and to-do notes, and notes between your phone, and the compatible PC, or a remote Internet server (network service).
■ Data communication applications For information on using a data communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. For better performance during data calls, place the phone on a stationary surface with the keypad facing down. Do not move the phone by holding it in your hand during a data call. Copyright © 2006 Nokia. All rights reserved.
19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged.
Authenticate hologram 1. When looking at the hologram label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. 2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards.
4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276 To create a text message, • for countries in Asia Pacific, excluding India: Enter the 20-digit code, for example, 12345678919876543210, and send to +61 427151515.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. Copyright © 2006 Nokia. All rights reserved.
Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.
Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements.
■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength.
■ Certification information (SAR) THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
Index bookmarks ..........................111 browsing pages .................108 cache memory ...................114 cookies ................................111 digital signature ...............117 script settings ....................111 security module ......114, 116 set up ...................................107 business cards ............................. 58 A access codes ............................... 14 accessories. See enhancements. alarm clock .................................. 86 antenna ........
call waiting .......................... 28 international ....................... 27 make a voice dialing call . 63 options during call ............ 28 recent calls list ................... 65 reject ..................................... 28 speed dialing ....................... 27 camera .......................................... 82 camera lens ................................. 22 care .............................................. 125 character case ............................ 30 charge the battery .......
communication ................ 119 synchronization .................. 89 date settings ............................... 69 delete e-mail .................................... 51 messages .............................. 52 dial out PTT call ......................... 99 digital signature ...................... 117 display settings .......................... 68 downloads applications ........ 16, 96, 112 content ................................. 16 files ...................................... 112 FM radio ......
indicators ..................................... 25 info messages ............................. 51 infrared ......................................... 74 infrared port ................................ 21 installation battery .................................. 17 SIM card ............................... 17 instant messaging ..................... 42 accept invitation ................ 45 availability ........................... 46 block ...................................... 47 contacts ........................
main display settings ............... 68 maintenance ............................. 125 maintenance service ................. 16 media ............................................ 82 medical devices ........................ 127 memory full .......................................... 39 memory in use .................... 62 menu navigation ............................ 32 scrolling ................................ 32 message center number .......... 33 message settings e-mail ...................................
note alarm ................................... 87 notes ............................................. 88 calendar ................................ 87 O one-to-one call ....................................... 100 contact ................................ 103 operation position ..................... 20 operator menu ............................ 80 organizer alarm clock .......................... 86 calculator ............................. 91 calendar ................................ 87 calendar note .........
callback request ............... 101 dial out call ......................... 99 group call ........................... 100 groups ................................. 103 invitation ............................ 105 key .......................................... 21 one-to-one call ................ 100 one-to-one contact ........ 103 settings ............................... 106 PUK codes .................................... 14 push to talk key ......................... 21 Push to talk. See PTT. pushed messages .
configuration ............... 20, 77 connectivity ......................... 72 date ........................................ 69 display ................................... 68 EGPRS .................................... 75 enhancements .................... 76 infrared ................................. 74 main display ........................ 68 messages .............................. 52 mini display ......................... 69 modem settings .................. 75 packet data ..........................
settings ................................. 30 traditional text input . 30, 31 writing .................................. 30 text message ............................... 33 templates ............................. 35 themes .......................................... 66 time settings ............................... 69 timers ............................................ 65 to-do list ...................................... 88 tones ............................................. 67 traditional text input .........
