User Manual

11
Quick Reference
Using the Integrated Laser Scanner
To scan:
1. Press the scanner trigger to power the 68XX and scanner on.
The Scan LED turns red if scanning is enabled and the
laser is on.
2. Point the 68XX at the bar code and press the trigger.
3. Ensure that the scan beam crosses all bars and spaces on the
bar code symbol, as shown below:
Hold the scanner farther away for larger symbols, and closer
for symbols with bars that are close together.
Long-range versions support a two-level scan trigger. The first,
narrow beam is for aiming, and the second beam decodes the
label.
4. The LED turns from red to green for successful decodes. The
68XX may also beep.
Right Wrong