User's Manual

8 AP-7562 Access Point

1.3.4 Outdoor Elevation Gain Configuration for US SKUs

Per FCC requirement, the use of the Access Point on UNII-1 band requires installers to input antenna elevation gain

for dipole antennas during configuration. This information can be found in Zebra antenna guide document at

www.zebra.com/support

The applicable outdoor antennas on 5GHz band are shown below:

1.3.5 AP-7562 Dual Band 2.4 GHz / 5 GHz Antennas - EU

1.3.6 AP-7562 Single Band 2.4 GHz Antennas - EU

1.3.7 AP-7562 Single Band 5 GHz Antenna - EU

Index Antenna Type Part Number Elevation Gain

1 Dipole ML-5299-HPA5-01 -2.53

2 Dipole ML-2452-HPAG4A6-01 5.7

3 Dipole ML-2452-HPA6X6-036 3.9

4 Dipole ML-2452-HPA6-01 4.09

Part Number Antenna Type 2.4 GHz Peak Gain 5.2 GHz Peak Gain

ML-2452-HPAG5A8-01 Dipole 7.5 8.0

ML-2452-PNA7-01R Panel 8.0 12.0

ML-2452-PNL3M3-1 Polarized Panel 9.7 9.2

Part Number Antenna Type 2.4 GHz Peak Gain

ML-2499-FHPA9-01R Dipole 10.5

ML-2499-HPA8-01 Dipole 8.0

Part Number Antenna Type 5.2 GHz Peak Gain

ML-5299-HPA10-01 Dipole 10.5

ML-5299-HPA5-01 Dipole 5.6