User's Manual

Installation Guide 9
1.4 Hardware and Mounting Accessories
The AP-7562 is a Power over Ethernet (PoE) device. When deployed, the use of an outdoor rated PoE power supply
and mounting bracket may be required. The recommended PoE accessories are listed in the following table:
1.5 AP-7562 Mounting Accessories
The AP-7562 has a flexible three piece mounting kit ( KT-147407-01 ) , together with an optional standoff extension
arm (
KT-150173-01 ) for pole mounting .
1.6 AP-7562 Weatherized Ethernet Accessorys
One RJ45 weatherized connector plug is included with each AP-7562 Access Point. If additional plugs are
required, they can be ordered using the part number listed in the following table:
Refer to the installation instructions included with the RJ45 weatherized connector plug for proper procedure to
form a drip loop with the cable.
Part Number Description
AP-PSBIAS-7161-US Outdoor IP66 802.3AT gigabit Ethernet power injector, 100-240 VAC US
AP-PSBIAS-7161-WW Outdoor IP66 802.3AT gigabit Ethernet power injector, 100-240 VAC International
KT-153143-01 Outdoor PoE mounting kit
Part Number Description
KT-147407-01 Hardware Mounting Kit
KT-150173-01 12 inch extension arm for mounting kit
Part Number Description
KT-153676-01 RJ45 weatherized connector plug
CAUTION When connecting RJ45 cables, ensure that all cables are connected to the Access
Point from the bottom, and include a drip loop to prevent moisture intrusion. Cover
the Ethernet cable with self-healing weatherproofing tape.
!