User's Manual

• no hardware compression
4. After establishing a connection with the AR400, type AdvancedReaderConsole on the host
computer and press Enter.
5. Enter admin as the username and change as the password. These are the default settings. You
cannot change the password from the serial console. To change the password (or create a new
user account) use the Web-based Administrator Console.
The host displays the Current Configuration menu:
Current Configuration:
Serial Number : redacted
MAC Address : redacted
1 -- DHCP : OFF
2 -- IP Address : 192.168.127.254
3 -- IP Port : 3000
4 -- Network Mask : 255.255.255.0
5 -- Gateway : 192.168.1.1
6 -- HTTP Server is : ON
7 -- HTTP Port is : 80
8 -- RS485 Node Address : 4
9 -- Commit Change
10 -- Discard Change
11 -- Exit
12 -- Reboot
13 -- Show system log
14 -- Trace system log : OFF
Select the menu number to change the item value:
6. To change a setting, enter the menu number, press Enter, then enter the new configuration value.
For example, to change the IP address, enter 2 to select IP Address, then press Enter. Enter a new
IP address value.
7. Enter 9, then press Enter, to apply the change.