User's Manual

Writing a Tag
Use the Write a Tag option to perform the following with a re-writable (R/W) tag:
• Write, Erase and/or Lock Tag ID.
• Write, Erase and/or Lock User Data.
• Write / Lock kill code.
• Kill A Tag
To write a tag:
1. Click Write a
Tag.
Figure 3-12. Write an RFID Tag Window
2. Enter the ID to write on the tag in the Tag ID field. If the tag already contains an ID, select the Erase
and Write checkboxes next to this field to overwrite it. To disable future changes of the tag ID select
the Lock checkbox next to the Tag ID field.
3. Enter the data to write on the tag in the User Data field. If the tag already contains user data select
the Erase and Write checkboxes next to this field to overwrite it. To disable future changes of the
user data select the Lock checkbox next to this field.
4. To write a kill code, enter six hex digits in the Kill Code field. To lock the kill code select the Write
and Lock checkboxes.
5. Select the antenna port to use for the write operation from the Read Point drop-down list.
6. Select whether to write information on a tag or kill a tag from the Action drop-down list.