User's Manual

Setting Date and Time
To set the reader’s date and time:
1. Click Maintenance in the main Administrator Console window.
2. Click Date/Time.
Figure 4-2. System Time Management Window
3. To synchronize the reader’s clock with a particular SNTP server, enter the server’s address in the
SNTP Server Address: field and click Set SNTP Parameters.
To set the reader’s system time manually, use the drop-down lists to select units of time, then click
Set Date and Time.
SNTP (Simple Network Time Protocol) is an Internet standard protocol (built on TCP/IP)
that assures accurate synchronization to the millisecond of computer clock times in a network of
computers.