User's Manual

8 CONCIERGE CC5000-10
Connecting to a WLAN Network
To set up a WLAN network:
1. Enter Admin mode by following the steps in Entering Admin Mode on page 7.
2. Touch (Settings icon) to display the Settings screen (see Figure 7).
3. Ensure Wi-Fi is set to ON; then select the desired Wi-Fi network. If the network is
encrypted, a prompt displays to enter the network password
4. When successfully connected, press to exit Admin mode.
Figure 7. Settings Screen
Connecting to a LAN Network
To set up a LAN network:
1. Ensure an Ethernet cable is connected to the Ethernet port accessible in the rear
of the unit (see Rear View on page 3).
2. Enter Admin mode by following the steps in Entering Admin Mode on page 7.
3. Touch (Settings icon) to display the Settings screen (see Figure 7).
MN001103A01a.fm Page 8 Monday, March 23, 2015 2:50 PM