user manual

Quick Reference

Charging the Battery Using the Serial/Charging Cable

15-Pin Serial Port Connector

To connect to the Micro-D RS-232 port at the top of the terminal, use an

ITT Cannon brand mil-spec connector (MDM-15SSB) with captivated jack

screws (mil p/n M83513/5-6) to protect the connector’s contacts from

damage during insertion and removal.

Attaching the Trigger Handle

(“Quick Grip” compatible terminals only)

For information about attaching and using the scanning Trigger Handle,

refer to the TRG 8100 Trigger Handle Quick Reference Guide

(p/n 72-55949-xx).

1. Insert the battery

charging receptacle

into the bottom of the

terminal.

2. Plug the power cable

into a wall outlet.

3. Plug the other end of

the power cable into

the battery charging re-

ceptacle.

Serial/Charging Cable

Battery charging

receptacle