User's Manual

Getting Started
FR6800 User Guide
 19
2. Remove the memory card cover on the side of the FR6070.
Figure 1-6 Card Installation
3. Insert the card with the card contacts facing up and the cut corner on the left, until you feel a click.
4. Replace the memory card cover .
To remove an microSD card:
1. Power off the FR6070.
2. Remove the memory card cover.
3. Carefully press and release the card to eject it.
4. Remove the card from the card slot.11/28
5. Replace the memory card cover.
Adjusting the Handstrap
The FR6070handstrap is attached to the bottom of the battery cover. Adjust the handstrap to increase comfort
when holding the FR6070for extended periods of time. To adjust the handstrap:
1. Feed the handstrap through the handstrap slot in either direction, to tighten or loosen.
2. Secure the handstrap by pressing the two sides together.