User's Manual

Maintenance
& Troubleshooting
 72
T abl e 7-1 Troubleshooting the FR6070(Continued)
Problem Cause Solution
The FR6070does
not accept scan
input.
Scanning
application is not
loaded.
Load a scanning application on the FR6070. See the
system administrator.
Unreadable bar
code.
Ensure the symbol is not defaced.
Distance between
exit window and bar
code is incorrect.
Place the FR6070within proper scanning range.
FR6070is not
programmed for the
bar code.
Program the FR6070to accept the type of bar code being scanned.
FR6070is not
program med to
generate a beep.
If the FR6070does not beep on a good decode, set the application
to generate a beep on good decode.
Battery is low. If the scanner stops emitting a laser beam upon a trigger press,
check the battery level. When the battery is low, the scanner shuts
off before the FR6070low battery condition notification. Note: If the
scanner is still not reading symbols, contact the distributor or
Motorola.
Bluetooth Connection
T abl e 7-2 Troubleshooting Bluetooth Connection
Problem Cause Solution
FR6070cannot find
any Bluetooth
devices nearby.
Too far from other
Bluetooth devices.
Move closer to the other Bluetooth device(s), within a range of 10
meters.
The Bluetooth
device(s) nearby are
not turned on.
Turn on the Bluetooth device(s).
The Bluetooth
device(s) are not in
discoverable mode.
Set the Bluetooth device(s) to discoverable mode. If needed, refer to
the device’s user documentation for help.