FR R607 74 Mo obile e Com mputter Usser Gu uide
FR6074 Mobile Computer User Guide Rev. A Jan.
FR6074 User Guide © 2008 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
FR6074 User Guide Revision History Changes to the original manual are listed below: Change -01 Rev. A Date Descriptio n Initial release.
FR6074 User Guide ECLARATION OF CONFORMITY CE Regulations: Hereby, declares that this FR6074 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To which this declaration relates, is in conformity with the following standards EN 301 511 9.0.2 EN300328 V1.7.1 EN300440‐2 V1.2.1 EN 301 489‐1 V1.8.1 EN301 489‐3 V1.4.1 EN301 489‐7 V1.3.1 EN301 489‐17 V1.3.
FR6074 User Guide This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
FR6074 User Guide When the HAC setting is on, FR6074 sends the audio from your phone calls to the telecoil rather than to the microphone of your hearing aid. You are likely to hear calls much better because volume is increased and background noise and feedback are diminished. The HAC setting improves only the calls you listen to through the earpiece. Turn off the [Bluetooth] function. Turn off the [WiFi] function. It does not affect calls heard on the speakerphone or with or a headset.
Table of Contents Table of Contents About This Guide Chapter1: Getting Started Chapter2: Using the FR6074 Chapter3: Using the GPS Navigation Chapter4: Using Bluetooth Chapter5: Using the Phone Chapter6: Accessories Chapter7: Maintenance & Troubleshooting 8 ix
iacs-is&t主旨：In reply to: About This Guide Introduction This guide provides information about using the FR60 Enterprise Digital Assistant (EDA) and accessories. NOTE Screens and windows pictured in this guide are samples and can differ from actual screens. Documentation Set The documentation set for the FR60 provides information for specific user needs, and includes: • FR6074 Quick Start Guide - describes how to get the FR6074 up and running. • FR6074 User Guide - describes how to use the FR6074.
About This Guide Configurations This guide covers the following configurations: Configuration Radios FR6074 WPAN: Bluetooth WWAN: GSM GPS: A-GPS Display Memory 2.
About This Guide Chapter Descriptions Topics covered in this guide are as follows: • Chapter 1, Getting Started provides information on getting the FR6074 up and running for the first time. • Chapter 2, Using the FR6074 provides basic instructions for using the FR6074, including powering on and resetting the FR6074, and entering and capturing data. • Chapter 3, Using GPS Navigation provides information about GPS navigation with the FR6074.
About This Guide • • • Button names on a screen. bullets (•) indicate: • Action items • Lists of alternatives • Lists of required steps that are not necessarily sequential Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. Related Documents • FR6074 Quick Start Guide, p/n 72-103079-xx. • FR6074 Windows Mobile 6 Regulatory Guide, p/n 72-103080-xx. • FR6074 Integrator Guide, p/n 72E-103078-xx.
About This Guide not used. Shipping the units improperly can possibly void the warranty. If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business partner for support.
Chapter 1 Getting Started Introduction This chapter lists the parts and accessories for the FR6074 and explains how to install and charge the batteries, replace the strap, and power on the FR6074 for the first time. Figure 1-1 FR6074 Front View Figure 1-2 FR6074 Rear View 1. IrDA Window 2. Headset Jack 13. Battery Door 14. Door Latch 3. Scan Button 4. Microphone 15. Speaker 16. Scan Widnow 5. I/O Connector 6. Power button 17. CF Card Slot 18. SD Card Slot 7. Keypad 8.
````````````````````````````` Getting Started Unpacking Carefully remove all protective material from the FR6074 and save the shipping container for later storage and shipping. Verify that you received the following: • FR6074 • 3600 mAh Lithium-ion battery • Battery cover/strap assembly • Tethered stylus • Protective overlay, installed on display window • Regulatory Guide • Quick Start Guide. Inspect the equipment for damage.
````````````````````````````` Getting Started Accessories Table 1-1 lists the accessories available for the FR6074. Table 1-1 FR6074 Accessories Manufacturing Part Number Description Cradle CRD7X00-1000RR MC70/MC75/FR68/FR6000 Series RoHS Compliant Single Slot USB Cradle with Spare Battery Charging: Must Order power adapter (KT-14000-148) and US AC Line Cord (23844-00-00R) separately.
````````````````````````````` 50-11300-050R Getting Started applies to orders placed directly with Motorola. FCA Manila, Minimum order: 100 (in Multiples of 100"s there after). GSM/GPRS Metal Headset (1 earpiece with speaker boom) Grounded Line Cords 23844-00-00R 50-16000-217R 50-16000-219R 50-16000-220R 50-16000-221R 50-16000-256R 50-16000-257R 50-16000-669R 50-16000-671R 50-16000-672R 50-16000-678R 50-16000-218R AC Line Cord, 2.3M, grounded, NEMA 5-15P plug.
Getting Started Getting Started To start using the FR6074 for the first time: • Install the SIM card (FR6074 and FR6074 only) • Install the main battery. • Charge the FR6074. • Power on the FR6074. • Configure the FR6074. Installing the SIM Card NOTE FR6074 and FR6074 configurations only. GSM phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain this card from your service provider.
Getting Started Installing the Main Battery NOTE The FR6074 ships with a 3600 mAh battery. To install the main battery: 1. Insert the battery, top first, into the battery compartment in the back of the FR6074. NOTE 2. Position the battery correctly, with the battery charging contacts on top of the charging contacts in the battery compartment. Press the battery down into the battery compartment until the battery release latch snaps into place. Figure 1-4 Inserting the Battery 3.
Getting Started • Single Slot USB/Serial Cradle • Vehicle Cradle. To charge the main battery: 1. Connect the charging accessory to the appropriate power source. 2. Insert the FR6074 into a cradle or attach to a cable. The FR6074 begins charging. The Charging/Battery Status LED blinks amber while charging, then turns solid amber when fully charged. See Table 1-2 for charging indications. The 3600 mAh battery fully charges in approximately five hours.
Getting Started the FR6074 on page 2-14. When turning the FR6074 on for the first time, the splash screen displays for about a minute as the FR6074 initializes its flash file system, then the calibration window appears. Note that these windows also appear upon cold boot. NOTE When the FR6074 powers up after inserting a battery for the first time, the device boots and powers on automatically.
Getting Started 2. Remove the memory card cover on the side of the FR6074 . Figure 1-6 Card Installation 3. Insert the card with the card contacts facing up and the cut corner on the left, until you feel a click. 4. Replace the memory card cover . To remove an microSD card: 1. Power off the FR6074. 2. Remove the memory card cover. 3. Carefully press and release the card to eject it. 4. Remove the card from the card slot.11/28 5. Replace the memory card cover.
Getting Started Removing the Screen Protector A screen protector is applied to the FR6074. Motorola recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift it off the display. Figure 1-7 Removing the Screen Protector CAUTION NOTE Do not use a sharp object to remove the protector. Doing so can damage the display.
Getting Started Battery Management Observe the following battery saving tips: NOTE The FR6074 factory default settings for the WWAN and WLAN radios are set to ON. • Leave the FR6074 connected to AC power at all times when not in use. • Set the FR6074 to turn off after a short period of non-use. • Set the backlight to turn off after a short period of non-use. • Turn off all wireless activities when not in use. • Power off the FR6074 when charging to charge at a faster rate.
Getting Started Turning Off the Radios Windows Mobile 6 devices include Wireless Manager, which provides a simple method of enabling, disabling, and configuring all the device’s wireless capabilities in one place. To open Wireless Manager, tap the Connectivity icon or tap Wireless Manager on the Today screen. Connectivity icon Figure 1-8 Opening Wireless Manager Select Wireless Manager.
Chapter 2 Using the FR6074 Introduction This chapter explains the buttons, status icons, and controls on the FR6074, and provides basic instructions for using the FR6074, including powering on and resetting the FR6074, and entering and capturing data. The FR6074 factory default radio states are: • Bluetooth - OFF • Phone - ON • Wireless LAN - ON. Today Screen The Today screen displays important information, such as upcoming appointments and status indicators.
Using the FR6076 To customize the Today screen, tap Start > Settings > Today icon. Use the Appearance tab to customize the background and the Items tab to change the list and order of items that appear on the screen. Status Icons The Navigation bar at the top of the screen can contain the status icons listed in Table 2-1. Table 2-1 Icon Status Icons Function Notification Description Backup Battery Low. Notification that one or more instant messages were received.
Using the FR R6076 Table 2-1 1 Icon Status IIcons (Contin nued) F Function WAN Descrription Call miss sed. Dialing while w no SIM card is installed. Voice calll in progresss. Calls are e forwarded. Call on hold. h Speakerp phone is on. Antenna//signal icon: w wireless on/g good signal. Antenna//signal icon: w wireless off. Antenna//signal icon: no service or o searching. HSDPA connecting. c HSDPA in use. GPRS co onnecting. GPRS in use. EGPRS connecting. c EGPRS in i use. Roaming g.
Using the FR6076 The command bar at the bottom of the screen can contain the task tray icons listed in Table 2-2. Table 2-2 Task Tray Icons Icon Bluetooth Enabled Bluetooth radio is on. Bluetooth Disabled Bluetooth radio is off. Bluetooth Connection Bluetooth radio is connected to another Bluetooth device. ActiveSync Active serial connection between the FR6074 and the host computer. Programs Table 2-3 lists the default programs in the Start menu.
Using the FR6076 Table 2-4 lists programs that are listed in the Programs window. Table 2-4 Icon Programs in Program Window Name Description ActiveSync Synchronize information between the FR6074 and a host computer or the Exchange Server. Games Bubble Breaker, Solitaire Sample AP DataWedge, Notify, and Scanner Calculator Perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division. File Explorer Organize and manage files on your device.
Using the FR6076 Table 2-4 Icon Programs in Program Window (Continued) Name Description Notes Create handwritten or typed notes, drawings, and voice recordings. Pictures & Videos View and manage pictures, animated GIFs, and video files. Search Search contacts, data, and other information on your FR6074. SIM Toolkit Manage the contacts that are stored on your SIM card. Copy SIM contents to Contacts on the FR6074. Task Manager Show and stop all the tasks on run Tasks Keep track of your tasks.
Using the FR6076 Settings Table 2-5 lists control applications pre installed on the FR6074. Tap Start > Settings to open the Settings window. Table 2-5 Settings in the Setting Window Icon D e scription Name Personal Tab Buttons Assign a program to a button. Input Set options for each of the input methods. Lock Set a password for the FR6074. Menus Set what programs appear in the Start menu. Owner Information Enter personal information on the FR6074.
Using the FR6076 Clock & Alarms Set the device clock to the date and time of your locale or to a visiting time zone when you’re traveling. Alarms can also be set at specified days and times of a week. Customer Feedback Submit feedback on the Windows Mobile 6 software. Device information Displays the FR6074’s software and hardware information. Encryption Allow files on a storage card to be encrypted. Encrypted files are readable only on your device.
Using the FR6076 Table 2-5 Settings in the Setting Window (Continued) Icon D escription Name Connections Tab Beam Set the FR6074 to receive incoming IrDA beams and bluetooth beam. Bluetooth Search for other Bluetooth devices. Connections Set up one or more types of modem connections for your device, such as phone dial-up, GPRS, Bluetooth, and more, so that your device can connect to the Internet or a private local network. Domain Enroll Enroll in domain.
Using the FR6076 Adjusting Volume To adjust the system volume using the Speaker icon in the navigation bar: 1. Tap the Speaker icon. The Volume dialog box appears. Figure 2-2 Volume Dialog Box 2. Tap and move the slide bar to adjust the volume. 3. Select the On or Off radio button to turn the volume on or off. You can also adjust the system volume using the Sounds & Notifications window, or use the Up/Down button on the side of the FR6074.
Using the FR6076 Figure 2-4 Battery Icon on the Title Bar Also view the battery status using the Power window. Power Setting 1. Tap Start > Settings > Power icon > Main tab. A power remaining capacity bar appears. Figure 2-5 Main Tab 2. Tick the following options to save the power, and tap ok.
Using the FR6076 3. Select Slow charge or Fast charge, and tap ok. Figure 2-7 USB Charge Tab Main Battery Temperature Notifications The temperature notification system implements three levels of notification when the temperature within the battery exceeds specific temperature thresholds: • Level 1: Temperature Watch; this level is similar to main battery low warning. It indicates that the battery temperature has reached the first threshold level.
Using the FR6076 LED Indicators The FR6074 has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio status. Table 2-6 describes the LED indications. LED Indicators Figure 2-10 1. Scan/Decode LED 2. Charging LED 3.
Using the FR6076 Resettingthe FR6074 There are two reset functions, warm boot and cold boot. A warm boot restarts the FR6074 by closing all running programs. A cold boot also restarts the FR6074, and also resets the clock. Data saved in flash memory or a memory card is not lost. If the FR6074 is not functioning properly, perform a warm boot first. If the FR6074 still does not respond, perform a cold boot. Performing a Warm Boot Press the reset button to reboot the device.
Using the FR6076 Locking the FR6074 Use the Device Lock feature to prevent use of the device. Note that when locked, the FR6074 does not respond to screen or keypad input. To lock the device, tap the Device unlocked icon. The icon changes to locked. Figure 2-11 Device Locked/Unlocked Icons To unlock the device and free it for use, tap Unlock. Figure 2-12 Unlock Device Window Tap Unlock on the Unlock window. NOTE You can make emergency calls even when the FR6074 is locked.
Using the FR6076 Keypads The FR6074 offers one type of modular keypad configuration: alpha-numeric.
Using the FR6076 Figure 2-13 FR6074 Numeric Keypad Table 2-9 Alpha-numeric Keypad Descriptions Key Blue Key Action Launches applications (shown on the keypad in blue). Press the Blue key once to activate this mode temporarily, followed by another key. This displays the following icon at the bottom of the screen, until a second key is pressed: Press the Blue key twice to lock this mode. This displays the following icon at the bottom of the screen: Press the Blue key a third time to unlock.
Using the FR6076 Talk (Green Phone): press to display the phone keypad window or to dial a phone number (from the phone keypad window). End (Red Phone): press when the phone keypad window displays to stop dialing or end a call. Talk/End Alpha-numeric Keypad Descriptions(continued) Table 2-9 Key Action Scroll Up and Left Moves up one item. Moves left one item when pressed with the Orange key. Scroll Down and Right Moves down one item. Moves right one item when pressed with the Orange key.
Using the FR6076 Phonepad Use this key in conjunction with the Blue key to display the Phonepad application without tapping the screen. This function is user programmable. Function Buttons The FR6074’s buttons perform certain functions. Function Buttons 1. Scan button 2. Power button Figure 2-14 • Power: Press the red Power button to turn the FR6074 screen on and off. The FR6074 is in suspend mode when the screen is off. For more information, see Powering On the FR6074 on page 1-8.
Using theFR6076 Stylus Use the FR6074 stylus to select items and enter information. The stylus functions as a mouse. • Tap: Touch the screen once with the stylus to press option buttons and open menu items. • Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action to perform. • Drag: Hold the stylus on the screen and drag across the screen to select text. Drag in a list to select multiple items.
Using theFR6076 Data Capture The FR6074 offers linear scanning as data capture. NOTE To perform data capture a scanning enabled application must be installed on the FR6074. A sample scanning application can be downloaded from the Motorola Support site at http://support.symbol.com. Linear Scanning FR6074 with an integrated linear scanner have the following features: • Reading of a variety of bar code symbologies, including the most popular linear, postal, and 1-D code types.
Using g theFR6076 Figure 2--16 3. Presss the scan button. b Ensurre the red sccan beam covvers the entirre bar code. The Scan/Decode LED lights red to in ndicate that sscanning is in n process, the en lights gree en and a bee ep sounds, by default, to indicate the bar code was decoded successfully. Figure 2--17 4. Linear Scanning Linear Scanner Aiiming Pattern n Rele ease the scan button.
Using theFR6076 Using IrDA In a Microsoft Windows Mobile program (except Messaging), and Picture & Videos, you can exchange files using either infrared or Bluetooth. NOTE You can also beam files (not folders) from the File Explorer window. Tap and hold the item you want to send, then tap Beam File from the pop-up menu. First activate the beam function before exchanging files with another IrDA device. To activate the Beam function: 1. Tap Start > Settings > Connections tab > Beam icon. 2.
Using theFR6076 Figure 2-19 Align FR6074 with IrDA Device 3. Tap and hold the item, then tap Beam [type of item] on the pop-up menu. 4. Tap the device that you want to send the file to. Figure 2-20 Beam Contact Figure 2-21 Receive File To receive files via IrDA connection: 1. Align the IrDA port of the FR6074 with that of the other IrDA device so that they are unobstructed and within a close range. 2. On the other device, send the file to the FR6074. 3.
Chapter 3 Using GPS Introduction The FR6074 includes Global Positioning System (GPS) technology using the Qualcomm chip. GPS technology is based on a worldwide system of GPS satellites orbiting the earth that continuously transmit digital radio signals. These radio signals contain data on the satellites’ locations and their exact clock time and are used to determine your location on the earth.
Using GPS 4. Tap ok to close the Setting window. NOTE If an application error message appears indicating that the COM port cannot be opened, ensure that a free COM port is selected in the GPS hardware port drop-down list. Operation Acquiring satellite signals may take a few minutes. It is best to be outside and have a clear, unobstructed view of the sky. Without a clear view, acquisition takes much longer and could result in the FR6074 being unable to compute the initial position quickly.
Using GPS Answering a Phone Call While Using GPS If you receive a phone call while using your GPS navigation software: 1. Answer the phone call by pressing the Answer button. 2. Once you end the phone call, press the End Call button to resume the audio on the GPS software. NOTE Anytime you are using GPS on the FR6074 and you receive a phone call, the audio on the GPS navigation software is muted until you finish the call.
Chapter 4 Using Bluetooth Introduction Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (30 feet/10 meters) communication and low power consumption. FR6074s with Bluetooth capabilities can exchange information (e.g.
The Bluetooth radio in this FR6074 operates as a Class 2 device power class. The maximum output power is 2.5mW and the expected range is 32.8 feet (10 meters). A definition of ranges based on power class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space. NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required.
Figure 4-1 Disable Bluetooth Enabling Bluetooth To enable Bluetooth, tap Bluetooth icon to enter Wireless Manager. Tap Bluetooth icon to change off to on. The Bluetooth icon changes to indicate that Bluetooth is enabled. Figure 4-2 Enable Bluetooth Bond New Device(s) The FR6074 can exchange information with bonded devices. To find Bluetooth devices in the area: 1. Ensure that Bluetooth is enabled on both devices. 2.
Figure 4-3 5. Enter Bluetooth Window Tap Menu to enter Settings window. Then tap Add new device to search for Bluetooth Devices. Figure 4-4 Add new device Window 6. After the device appears, tap it and enter a passcode to establish a secure connection with it. Meanwhile enter the passcode on the target device.
1. Choose one file as below, tap Menu > Beam picture Menu. Figure 4-6 Select file 2. Then choose the destination device, and wait till Done is showed. Figure 4-7 Transfer file Window Bluetooth Settings Use the Bluetooth Settings window to configure the operation of the application. Tap Menu > Settings. The Bluetooth Settings window appears. Device Info Tab Use the Device Info tab to add and bond new devices. Please refer to Bond new device(s).
Figure 4-8 BTExplorer Settings - Device Info Tab 1. Before bonding a new device, make sure to turn on Bluetooth. 2. If you want other devices to find your FR6074, please tick “Make this device visible to other devices”. COM Ports Tab Use the COM Ports tab set specific outgoing ports for bonded devices. 1. Tap New Outgoing Port. Figure 4-9 2. Select the device you want to add. Then tap Next. Figure 4-10 3. Add COM Ports Select device Select a port from drop-down list. Then tap Finish.
Figure 4-11 Select a Port for device 60
Chapter 5 Using the Phone Introduction Use the FR6074 to make phone calls, set up speed dials, keep track of calls, and send text messages. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID. Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
Using the Phone e To acces ss the phone e keypad tap Start > Pho one or press tthe green ph hone key on tthe FR6074’’s keypad. To receiv ve calls when the FR607 74 is suspend ded, leave the phone radio turned on and ensure the FR6074 is set to wa ake with anyy key. Tu urning th he Phon ne On and a Off Window ws Mobile 6 de evices includ de Wireless Manager, w which provide es a simple m method of ena abling and diisabling the phon ne. To open Wireless Manager, M tap the Connec ctivity icon.
Using the Phone Handset Mode Figure 5-3 Speaker Mode Headset Mode Audio Modes Using a Wired Headset You can use a stereo headset for audio communication when using an audio-enabled application. To use a headset, plug the headset jack into the audio connector on the side of the FR6074. Set the FR6074’s volume appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker. For the best audio performance, Motorola recommends a 2.
Using the Phone Using a Bluetooth Headset You can use a Bluetooth headset for audio communication when using an audio-enabled application. See Chapter 4, Using Bluetooth for information on connecting a Bluetooth headset to the FR6074. Set the FR6074’s volume appropriately before putting the headset on. When a Bluetooth headset is connected the speakerphone is muted. It is recommended for phone conversations to use the Bluetooth Hands-free profile instead of the Headset profile.
Using the Phone Making a Call NOTE You can make emergency calls even when the FR6074 is locked or when a SIM card is not installed. See Making an Emergency Call on page 5-7 for more information. With the FR6074, you can make a call from the phone, contacts, speed dial and call history. Using the Phone To make a call using the phone keypad: 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad. 2. From the Phone keypad, tap the number to call. 3. Tap Talk. 4.
Using the Phone Using Call History To make a call using Call History: 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad. 2. From the Phone keypad, tap Call History. Phone icon Figure 5-8 Call History 3. Tap the phone icon next to the number to begin dialing and return to the phone keypad. 4. Tap End or press the red phone key on the FR6074 keypad to stop dialing or end the call. Making a Speed Dial Call Use Speed Dial to call someone saved in the speed dial directory.
Using the Phone Making an Emergency Call Your service provider programs one or more emergency phone numbers, such as 911 or 999, that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted (on FR6074). Your service provider can program additional emergency numbers into your SIM card. However, your SIM card must be inserted in your phone in order to use the numbers stored on it. See your service provider for additional information.
Using the Phone call on hold and answer the incoming call. • To put a call on hold to call another number or answer an incoming call, tap Hold on an FR6074/74. To move from one call to another, tap Swap on an FR6074/74 Smart Dialing Smart Dialing makes it easy to dial a phone number.
Using the Phone 5. To call a different phone number associated with the selected contact, tap the contact name and select the phone number to call. Muting a Call During a call, you can mute the microphone so you can hear the person on the line but he or she cannot hear conversation from the microphone. This is useful when there is conversation or background noise on your end. To mute or unmute a call: 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad. 2. Make a call. 3.
Using the Phone Taking Notes To create a note during a call, tap Note on the display, then enter the note. For more information about creating notes see the Windows On-Device Help. To access a note created during a call: 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad. 2. From the Phone keypad, tap Call History. 3. Tap and hold the number or the Note icon for the phone call entry containing the note. Note icon Figure 5-13 4. Tap View Note. Figure 5-14 5.
Using the Phone Using Speed Dial Create speed dial numbers to dial frequently called numbers with a single tap. Before creating a speed dial entry, ensure the phone number exists in Contacts. Adding a Speed Dial Entry To add a speed dial entry from the phone keypad: 1. Ensure the contact and phone number are in the Contacts list. 2. Tap Start > Phone or press the green phone key on the FR6074’s keypad. 3. Tap Menu > Speed Dial > Menu > New. Figure 5-15 4.
Using the Phone Figure 5-17 7. Speed Dial Contact List Tap ok to exit the Speed Dial Contact List. To add a speed dial entry from the Contacts window: 1. Tap Start > Contacts. Figure 5-18 Contacts 2. Tap a contact name. 3. Tap Menu > Add to Speed Dial. Figure 5-19 Speed Dial Contact Location 4. Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. 5. Tap ok.
Using the Phone Editing a Speed Dial Entry 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad. 2. Tap Menu > Speed Dial. Figure 5-20 Speed Dial Contact List 3. Tap and hold the contact name. 4. Tap Edit... . 5. Change the name, phone number, or location information. 6. Tap ok. NOTE Editing names and phone numbers in Speed Dial does not alter contact information in Contacts (Start > Contacts). Deleting a Speed Dial Entry 1.
Using the Phone Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts (Start>Contacts). NOTE Using Call History Use Call History to call someone who was recently called, or recently called in. Call History provides the time and duration of all incoming, outgoing, and missed calls. It also provides a summary of total calls and easy access to notes taken during a call. Table 4-1 lists the call history icons that appear in the Call History window.
Using the Phone 3. Tap Menu. Figure 5-23 4. Call History - Tools Menu Select Call Timers... . Figure 5-24 Call History - Call Timers 5. Tap Reset. (The All Calls: counter cannot be reset.) 6. Tap ok to exit the Call Timers window. Deleting Call History Items by Call Date 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu > Call Timers... .
Using the Phone Figure 5-25 Call History - Call Timers 4. In the Delete call history items older than: drop-down list select a time period on which to base deletion of stored items. 5. Tap ok to exit the Call Timers window. Deleting All Call History Items 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu. Figure 5-26 4. Call History - Tools Menu Select Delete all calls.
Using the Phone Viewing Call Status 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap an entry. The Call Status window appears. Figure 5-28 NOTE 4. Call History - Detail When more than one call is on the phone line, only the duration of the first call is recorded. Tap ok and then ok to exit.
Using the Phone 5. Depending on the item selected, the appropriate window displays. For example, select Send SMS to display the Inbox window. 6. Tap ok to exit the Call History window. Swapping Calls on an FR6074/6076 To move between two or more phone calls: 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad to display the Phone keypad. 2. Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad.
Using the Phone Conference Calling on an FR6074 NOTE Conference Calling and the number of conference calls allowed may not be available on all services. Please check with your service provider for Conference Calling availability. To create a conference phone session with multiple people: 1. Tap Start > Phone or press the green phone key on the FR6074’s keypad to display the Phone keypad. 2. Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad.
Using the Phone NOTE To speak privately with one party during a conference call, tap Menu > Private. To include all parties again, tap Menu > Conference.
Using the Phone Text Messaging Use the Text Messages window to send and receive text messages to and from mobile phones. The text can contain words, numbers, or an alphanumeric combination no longer than 160 characters. Short text messages delivered over mobile networks transmit from the sending FR6074, are stored in a central short message center, then forwarded to the destination mobile device. If the recipient is not available, the message is stored and can be sent later.
Using the Phone Tap Text Messages. Figure 5-40 Text Messaging on Today Screen The Messaging window appears. Figure 5-41 2. Messaging Window In the message list, tap a Text Messages. Tap to reply the message. Figure 5-42 NOTE Text Messages List If the phone is turned off and you tried to call the sender, send a reply, or forward the message, you are prompted to turn the phone function on. Sending a Text Message To create a text message: 1.
Using the Phone 2. Tap Menu > Send Text Message. Figure 5-43 3. Phone Screen Contact List Compose your message. Address Area Message Area Figure 5-44 • The auto-correct feature automatically fixes common spelling errors as you type so your messages are more accurate. • The character counter lets you see and control the size of the message as you compose.
Using the Phone If the phone is turned on, your text message is sent. If it’s off, you are prompted to turn on the phone. If you do so, the message is sent; otherwise when you tap ok, the message is saved in the Drafts folder and sent when the phone is turned on. If you are out of coverage area, the message is saved in the Drafts folder and sent when you return to a coverage area.
Accessories Chapter 6 Accessories Introduction FR6074 accessories, listed below, provide a variety of product support capabilities. • Single Slot USB/Serial Cradle - Charges the FR6074 main battery and a spare battery. Synchronizes the FR6074 with a host computer through a USB connection. • Four Slot Battery Charger - Charges spare standard and high capacity batteries. • Auto Charge Cable - Plugs into a vehicle cigarette lighter to charge the FR6074 while on the road.
Accessories Slow Blinking Amber=Charging Solid Green=Fully Charged Fast Blinking Red=Charging Error *It is recommended that this product be charged for 24 hours before the first use to ensure that the internal battery is fully charged.
Accessories Battery Charging Indicators The Single Slot USB/Serial Cradle charges the FR6074’s main battery and a spare battery simultaneously. The FR6074’s charge LED indicates the status of the battery charging in the FR6074. See Table 1-2 on page 1-7 for charging status indications. The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle. See Table 6-1 for charging status indications. The 3600 mAh battery fully charges in less than five hours.
Accessories H Headset Use the headsett to communicate via Voic ce-Over-IP (V VOIP) or for audio playba ack and telep phony applic cations. To connect c the headset, h rem move the plug g from the he eadset jack at the top of th he FR6074 and a insert the e head dset connecttor. Contact a Motorola re epresentative e for compatible headsetss. For best perform mance, Motorrola recommends a 2.5m mm jack headset, p/n 50-1 11300-050R.
Accessories • Synchronize information between the FR6074 and a host computer. With customized or third party software, it can also synchronize the FR6074 with corporate databases. • Provide USB connection through the USB pass-through port for communication with a USB device, such as a host computer. For communication setup procedures, refer to the FR6074 Integrator Guide. Dedicated printer cables provide communication with a printer.
Chapter 7 Maintenance&Troubleshooting Introduction This chapter includes instructions on cleaning and storing the FR6074, and provides troubleshooting solutions for potential problems during FR6074 operation. Maintaining the FR6074 For trouble-free service, observe the following tips when using the FR6074: • Do not scratch the screen of the FR6074. When working with the FR6074, use the supplied stylus or plastic-tipped pens intended for use with a touch-sensitive screen.
Maintenance & Troubleshooting • A screen protector is applied to the FR6074. Motorola recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. Benefits include: • Protection from scratches and gouges • Durable writing and touch surface with tactile feel • Abrasion and chemical resistance • Glare reduction • Keeping the device’s screen looking new • Quick and easy installation.
Maintenance & Troubleshooting Cleaning Always wear eye protection. CAUTION Read warning label on compressed air and alcohol product before using. If you have to use any other solution for medical reasons please contact Motorola for more information. WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines.
Maintenance & Troubleshooting 8. Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface. CAUTION: Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 9. Inspect the area for any grease or dirt, repeat if required. Cleaning Cradle Connectors To clean the connectors on a cradle: 1. Remove the DC power cable from the cradle. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3.
Maintenance & Troubleshooting Troubleshooting FR6074 Table 7-1 Troubleshooting the FR6074 Problem FR6074 does not turn on. Rechargeable lithium-ion battery did not charge. Cause Solution Lithium-ion battery not charged. Charge or replace the lithium-ion battery in the FR6074. Lithium-ion battery not installed properly. Install the battery properly. See Installing the Main Battery on page 1-6. System crash. Perform a warm boot. If the FR6074 still does not turn on, perform a cold boot.
Maintenance & Troubleshooting Table 7-1 Troubleshooting the FR6074 (Continued) Problem FR6074 shuts off. Cause Solution FR6074 is inactive. The FR6074 turns off after a period of inactivity. If the FR6074 is running on battery power, set this period from 1 to 5 minutes, in one-minute intervals. If the FR6074 is running on external power, set this period to 1, 2, 5, 10, 15, or 30 minutes. Check the Power window by selecting Start > Settings > System tab and tapping the Power icon.
Maintenance & Troubleshooting Table 7-1 Troubleshooting the FR6074 (Continued) Problem The FR6074 does not accept scan input. Cause Solution Scanning application is not loaded. Load a scanning application on the FR6074. See the system administrator. Unreadable bar code. Ensure the symbol is not defaced. Distance between exit window and bar code is incorrect. Place the FR6074 within proper scanning range. FR6074 is not programmedfor the bar code.
Maintenance & Troubleshooting Single Slot USB/Serial Cradle Table 7-3 Troubleshooting the Single Slot USB/Serial Cradle Symptom LEDs do not light when FR6074 or spare battery is inserted. Possible Cause Action Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. FR6074 is not seated firmly in the cradle Spare battery is not seated firmly in the cradle. Remove and re-insert the FR6074 into the cradle, ensuring it is firmly seated.
Maintenance & Troubleshooting Table 7-3 Troubleshooting the Single Slot USB/Serial Cradle (Continued) Symptom FR6074 battery is not charging. Spare battery is not charging. During data communication, no data transmits, or transmitted data was incomplete. Possible Cause Action FR6074 was removed from cradle or cradle was unplugged from AC power too soon. Ensure cradle is receiving power. Ensure FR6074 is seated correctly. Confirm main battery is charging under Start > Settings > System > Power.
