User's Manual

Getting Started
FR
6800
User
G
u
id
e
 21
Battery Management
Observe the following battery saving tips:
NOTE The FR6076 factory default settings for the WWAN and WLAN radios are
set to ON.
•
Leave the FR6076 connected to AC power at all times when not in use.
• Set the FR6076 to turn off after a short period of non-use.
• Set the backlight to turn off after a short period of non-use.
• Turn off all wireless activities when not in use.
• Power off the FR6076 when charging to charge at a faster rate.
Changing the Power Settings
To set the FR6076 to turn off after a short period of non-use:
1. Tap Start > Settings > System tab > Power icon > Advanced tab.
2. Select the On battery power: Turn off device if not used for check
box and select a value from the drop-down list.
3. Select ok.
Changing the Backlight Settings
To change the backlight settings in order to conserve more battery power:
1. Tap Start > Settings > System tab > Backlight icon > Power tab.
2. Select the Turn off backlight if device is not used for check box and select a
value from the drop-down list.
3. Select the Brightness tab.
4. Use the slider to set a low value for the backlight.
5. Select ok.