User's Manual

Using the FR6076

 39

Resetting the FR6076

There are two reset functions, warm boot and cold boot. A warm boot restarts the FR6076 by closing all running

programs. A cold boot also restarts the FR6076, and also resets the clock. Data saved in flash memory or a

memory card is not lost.

If the FR6076 is not functioning properly, perform a warm boot first. If the FR6076 still does not respond, perform a

cold boot.

Performing a Warm Boot

Press the reset button to reboot the device.

Performing a Cold Boot

Put the battery into the device, lock the battery cover, and press the power button

Waking the FR6076

The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.

The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control

Panel time-out settings. These settings are configurable and the factory default settings are shown in Table 2-7 are

subject to change/update.

abl

2-7 Wake-up Default Settings

Condition for

Wake-up

Power Button Automatic

me-out

AC power is applied. No Yes

Mobile computer is inserted into a cradle. No Yes

Mobile computer is removed from a cradle. No Yes

Mobile computer is connected to a USB device. No Yes

Mobile computer is disconnected from a USB device. No Yes

A key is pressed. No Yes

The scan triggered is pressed. No Yes

The screen is touched. No No

Audio Jack No No

Audio Btn No No

Bluetooth communication Yes Yes

Incoming phone call Yes Yes