User's Manual

Maintenance
& Troubleshooting
 103
Communication
software is not
installed or
configured properly.
Perform setup as described in the FR6874 Integrator Guide.
Cables
T abl e 7-5 Troubleshooting the Cables
Symptom Possible Cause Action
FR6874 battery is
not charging.
FR6874 was
disconne cted from
AC power too soon.
Connect the power cable correctly. Confirm main battery is charging
under
Start > Settings > System > Power. The 3600 mAh battery
fully charges in less than six hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
The FR6874 is
not fully
attached to
Detach and re-attach the power cable to the FR6874, ensuring it
is firmly connected.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Cable was
disconne cted from
FR6874 during
communications.
Re-attach the cable and retransmit.
Incorrect cable
configuration.
See the system administrator.
Communication
software is not
installed or
configured properly.
Perform setup as described in the FR6874 Integrator Guide.
