User's Manual

Using the FR6876
 34
LED Indicators
The FR6876 has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The
Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio
status. Table 2-6 describes the LED indications.
Figure 2-10 LED Indicators
1. Scan/Decode LED
2. Charging LED
3. Radio Status LED
T
abl e 2-6 LED Indications
LED status Indication
Scan/Decode LED
Solid Green Successful decode/capture
Solid red Laser enabled, scanning in process
Off Not enabled
Charging/Battery Status LED
Slow blinking amber
Main battery in FR6876 is charging.
Solid green
Main battery in FR6876 is fully charged.
Fast blinking amber
Charging error
Off
Not charging
Single blink amber (when power button is
pressed)
Battery depleted
Blinking amber (when power button is
pressed)
Battery over-temperature condition
Radio Status LED
Slow blink green The radio (BT,WIFI,GPS,RIL) can work
correctly when it is on
Slow blink red Some radio (BT,WIFI,GPS,RIL) can not
work correctly when it is on.
Off All radio off.
NOTE For information about scanning/decoding, see Data Capture on page 2-29. For information about WAN radio
status and settings, see Chapter 5, Using the Phone, or refer to the FR6876 Integrator Guide.