User's Manual

Using the FR6876
 35
Resetting the FR6876
There are two reset functions, warm boot and cold boot. A warm boot restarts the FR6876 by closing all running
programs. A cold boot also restarts the FR6876, and also resets the clock. Data saved in flash memory or a
memory card is not lost.
If the FR6876 is not functioning properly, perform a warm boot first. If the FR6876 still does not respond, perform a
cold boot.
Performing a Warm Boot
Press the reset button to reboot the device.
Performing a Cold Boot
Put the battery into the device, lock the battery cover, and press the power button.
Waking the FR6876
The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.
The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control
Panel time-out settings. These settings are configurable and the factory default settings are shown in Table 2-7 are
subject to change/update.
T abl e 2-7 Wake-up Default Settings
Condition for Wake-up Power Button Automatic Ti me-out
AC power is applied. No Yes
Mobile computer is inserted into a cradle. No Yes
Mobile computer is removed from a cradle. No Yes
Mobile computer is connected to a USB device. No Yes
Mobile computer is disconnected from a USB device. No Yes
A key is pressed. No Yes
The scan triggered is pressed. No Yes
The screen is touched. No No
Audio Jack No No
Audio Btn No No
Bluetooth communication Yes Yes
Incoming phone call Yes Yes