User's Manual

Using the Phone
 68
Audio Modes
The FR6876 offers three audio modes for use during phone calls:
• Handset Mode: Switches audio to the speaker at the top front of the FR6876, so you can use the FR6876
as a handset. This is the default mode.
• Speaker Mode: Use the FR6876 as if on speaker phone. Tap the Speaker On button to activate this mode.
Tap the Speaker Off button to switch back to handset mode.
• Headset Mode: Connect a wired or Bluetooth headset to automatically switch audio to the headset.
The FR6876 defaults to handset mode. When a wired headset is plugged into the FR6876 audio connector
or a
Bluetooth headset is configured for use with the FR6876, the earpiece and speakerphone are muted and audio is
heard through the headset.
NOTE While using a Bluetooth headset during a call, the mobile computer will not go into suspend mode.
Handset Mode Speaker Mode Headset Mode
Figure 5-3 Audio Modes
Using a Wired Headset
You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack into the audio connector on the side of the FR6876. Set the FR6876’s
volume appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
For the best audio performance, Motorola recommends a 2.5mm jack headset, see Accessories on page 1-3.