Barcode Reader User Manual

ManualsBrandsSymbol Technologies ManualsBarcode ReaderMC9000-G

MC9000-G

Product Reference Guide

with Windows

Mobile 2003 Software for Pocket PCs

Summary of content (484 pages)

PAGE 1
MC9000-G Product Reference Guide with Windows® Mobile 2003 Software for Pocket PCs
PAGE 2
PAGE 3
MC9000-G with Windows® Mobile 2003 Software for Pocket PCs Product Reference Guide 72-65703-01 Revision A October 2003
PAGE 4
© 2003 by Symbol Technologies, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Symbol. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
PAGE 5
Contents About This Guide Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Chapter Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Notational Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx Related Documents and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
iv MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Charging the Main Battery and Memory Backup Battery . . . . . . . . . . . . . . . . 1-8 Charging the Main Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Charging Spare Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
Contents v Entering Information Using the Input Panel . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Soft Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Block Recognizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Letter Recognizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 8
vi MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Program Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up/Down Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
Contents vii Contrast (Monochrome Devices Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storage Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Running Programs. . . . . . . . . . . . . .
PAGE 10
viii MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Chapter 5. Spectrum24 Configuration Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5- 3 Mobile Companion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Finding WLANs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Status . . . . . . . . . . . . . . . . . . .
PAGE 11
Contents ix Creating Meeting Requests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7 Using the Summary Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9 Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 12
x MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Using AvantGo Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Pocket Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Browsing the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 13
Contents xi Battery Charging Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial/USB Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the MSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Adapter Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching and Removing . . . . . . . . . . . . . . . . . . . . . .
PAGE 14
xii MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Chapter 10. Configuring the Mobile Computer Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 3 Starting Terminal Configuration Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4 Defining Script Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7 Creating the Script for the Hex Image . . . . .
PAGE 15
Contents xiii Magnetic Stripe Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-12 Appendix A. Block Recognizer Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A- 3 Appendix B. Demo Program Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B- 3 SelfTest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 16
xiv MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Scanner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Symbol Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 17
Contents xv Appendix E. Keypad Maps Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E- 3 Keypads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3 43-Key Keypad Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4 53-Key Keypad Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 18
xvi MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 19
About This Guide Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Chapter Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Notational Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx Related Documents and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 20
xviii MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 21
xix Introduction This Product Reference Guide provides information about the MC9000-K and MC9000-S mobile computers using the Microsoft® Windows Mobile 2003 Software for Pocket PCs, and its accessories. The MC9000-K and MC9000-S mobile computers include the following variations: • • MC9010: Windows® Mobile 2003 Software for Pocket PCs operating system performs 1dimensional bar code scanning with integrated laser scanner, or 1-dimensional and 2dimensional bar code scanning with integrated imager; 802.
PAGE 22
xx MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG • • • • • • • • • • Chapter 7, Applications describes how to use the applications installed on the mobile computer. Chapter 8, Accessories describes the accessories available for the mobile computer and how to setup power connections and battery charging capabilities, where applicable.
PAGE 23
xxi • • • • icons on a screen. Bold text is used to highlight the following: • key names on a keypad • button names on a screen. Bullets (•) indicate: • action items • lists of alternatives • lists of required steps that are not necessarily sequential. Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. Related Documents and Software The following documents provide more information about the MC9000-G mobile computer.
PAGE 24
xxii MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Call the Support Center from a phone near the scanning equipment so that the service person can try to talk you through the problem. If the equipment is found to be working properly and the problem is symbol readability, the Support Center will request samples of bar codes for analysis at our plant. If the problem cannot be solved over the phone, you may need to return the equipment for servicing.
PAGE 25
xxiii Denmark/Danmark Symbol Technologies AS Dr.
PAGE 26
xxiv MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Netherlands/Nederland Symbol Technologies Kerkplein 2, 7051 CX Postbus 24 7050 AA Varsseveld, Netherlands 315-271700 (Inside Netherlands) +31-315-271700 (Outside Netherlands) Norway/Norge Symbol’s registered and mailing address: Symbol Technologies Norway Hoybratenveien 35 C N-1055 OSLO, Norway Symbol’s repair depot and shipping address: Symbol Technologies Norway Enebakkveien 123 N-0680 OSLO, Norway +47 2232 4375 South Africa Symbol Te
PAGE 27
xxv If you purchased your Symbol product from a Symbol Business Partner, contact that Business Partner for service. For the latest version of this guide go to:http://www.symbol.com/manuals.
PAGE 28
xxvi MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 29
Getting Started Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1- 3 Unpacking the Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 30
1-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Setting Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16 Checking Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Configuring the Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 31
Getting Started Introduction This chapter lists the accessories for the mobile computer and explains how to install and charge the batteries, replace the hand strap and start the mobile computer for the first time. Indicator LED Bar Touch Screen Headphone Jack Microphone Keypad Exit Window Scan Button Power Trigger Strap Lanyard Stylus Figure 1-1.
PAGE 32
1-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Unpacking the Mobile Computer Carefully remove all protective material from around the mobile computer and save the shipping container for later storage and shipping. Verify that you received all equipment listed below: • • • • • • mobile computer lithium-ion battery handstrap, attached to the mobile computer stylus, in the handstrap stylus silo Regulatory Guide Quick Start Guide (poster). Inspect the equipment for damage.
PAGE 33
Getting Started Accessories • • • • • • • • • • • • • • • • • Single Slot Serial/USB Cradle: Charges the mobile computer main battery and a spare battery. It also synchronizes the mobile computer with a host computer through either a serial or a USB connection. Four Slot Charge Only Cradle: Charges the mobile computer main battery. Four Slot Ethernet Cradle: Charges the mobile computer main battery and synchronizes the mobile computer with a host computer through an Ethernet connection.
PAGE 34
1-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Getting Started In order to start using the mobile computer for the first time: • • • • install the main battery charge the main battery and backup battery start the mobile computer configure the mobile computer. The main battery can be charged before or after it is installed.
PAGE 35
Getting Started Removing the Main Battery To remove the main battery: 1. Press the red Power button to turn off the screen. This sets the mobile computer to suspend mode. 2. Simultaneously press both primary battery releases. The battery partially ejects from the mobile computer. 3. Press the secondary battery release, on top of the battery, and slide the battery out of the mobile computer. Primary Battery Releases Secondary Battery Release Figure 1-3.
PAGE 36
1-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Charging the Battery Charging the Main Battery and Memory Backup Battery Before using the mobile computer for the first time, charge the main battery until the amber charge indicator light remains lit (see Table 1-1 on page 1-9 for charge status indications). Charge time is less than four hours. The mobile computer can be charged using a cradle, the CAM with a charging cable, or the MSR with the appropriate power supply.
PAGE 37
Getting Started • Four Slot Spare Battery Charger on page 8-17 • Universal Battery Charger (UBC) on page 8-28. Charging the Main Battery You can charge the main battery in the mobile computer using a cradle, the CAM with a charging cable, or the MSR with the appropriate power supply. 1. Ensure the accessory used to charge the main battery is connected to the appropriate power source (see Chapter 8, Accessories for setup information). 2.
PAGE 38
1-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 2. Insert the spare battery into the accessory’s spare battery charging slot with the charging contacts facing down (over the charging pins) and gently press down on the battery to ensure proper contact. 3. The battery starts to charge automatically. The amber charge LED on the accessory lights to show the charge status. See Chapter 8, Accessories for charging indications for the accessory.
PAGE 39
Getting Started To replace stylus: Push the stylus back into the storage position. The stylus automatically locks in place.
PAGE 40
1-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Strap Lanyard The strap lanyard may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the strap lanyard: 1. 2. 3. 4. 5. Disconnect the strap lanyard disconnect clip. Open loop and slide the disconnect clip through the loop. Slide the loop out of the connector post. Repeat the procedure on the remaining connector to remove the strap lanyard.
PAGE 41
Getting Started Starting the Mobile Computer Press the Power button to turn on the mobile computer. If the mobile computer does not power on, perform a cold boot. See Resetting the Mobile Computer on page 2-51. Note When a battery is fully inserted in a mobile computer for the first time, upon the mobile computer’s first power up, the device boots and powers on automatically. When the mobile computer is powered on for the first time, it initializes its system.
PAGE 42
1-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Calibrating the Screen To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus: 1. Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen. Figure 1-7. Align Screen Note To re-calibrate the screen at anytime, press FUNC + Esc on the mobile computer to launch the calibration screen application.
PAGE 43
Getting Started 2. Follow the directions on the screen which lead you through a simple exercise illustrating how to use the stylus and pop-up menus. Figure 1-8. Using Pop-up Menus 3. Use the drop-down list to set your time zone, and tap Next. Figure 1-9. Setting Time Zone 4. Tap the Complete screen to complete the initial setup.
PAGE 44
1-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 5. The Today screen appears. (See Today Screen on page 2-23 for information about using the Today screen.) Figure 1-10. Today Screen Setting Time and Date When the mobile computer is powered on for the first time, and after a cold boot, tap Start - Settings - System tab - Clock icon to use the clock control panel applet to set the time zone, time and date. Figure 1-11.
PAGE 45
Getting Started See Clock on page 3-35 for details about setting time and date. Note Checking Battery Status To check whether the main battery or backup battery in the mobile computer is charged, tap Start Settings - System tab - Power icon to display the Battery Status window. Figure 1-12. Battery Status Screen To save battery power, set the mobile computer to turn off after a specified number of minutes. See Power on page 3-43 to set power management options.
PAGE 46
1-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Configuring the Mobile Computer Refer to the following chapters to configure the mobile computer: • • • • • • To customize the mobile computer settings, see Chapter 3, Settings. To set up ActiveSync to synchronize the mobile computer with the host computer, see Chapter 4, Communications. To configure the mobile computer for Spectrum24, see Chapter 5, Spectrum24 Configuration.
PAGE 47
Operating Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 43-Key Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 53-Key Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 48
2-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Battery Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connectivity Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Time Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instant Message Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 49
Operating Resetting the Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-51 Performing a Warm Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-51 Performing a Cold Boot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 50
2-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Introduction This chapter explains the physical buttons and controls on the mobile computer, how to use the mobile computer, including instructions for powering on and resetting the mobile computer, using the stylus and a headset, entering information and scanning. Keypads The mobile computer has five interchangeable modular keypad configurations: • • • • • 43-key keypad 53-key keypad 3270 Emulator 5250 Emulator VT Emulator.
PAGE 51
Operating 43-Key Keypad The 43-key keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-1 on page 2-6 for key and button descriptions and Table 2-6 on page 2-20 for the keypad’s special functions. . . Figure 2-1.
PAGE 52
2-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 2-1. 43-Key Descriptions Key Description Power (red) Powers the mobile computer on and off. Performs a warm boot when held for five seconds and a cold boot when held for 15 seconds. Green/Red Dot Unassigned function key. (Button includes a green or red dot.) Scan (yellow) Scan key - used for scanning applications, this key has the same function as pulling the trigger.
PAGE 53
Operating Table 2-1. 43-Key Descriptions (Continued) Key Description ALT Press and release the ALT key to activate the keypad ALT (alternate) functions. Press and release the ALT key again to return to the normal keypad functions. ALPHA (orange) The default keypad mode is the num-lock (number lock) mode. Press the orange ALPHA key to de-activate the num-lock mode and to access the alternate ALPHA characters (shown on the keypad in orange).
PAGE 54
2-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 53-Key Keypad The 53-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-2 on page 2-9 for key and button descriptions and Table 2-6 on page 2-20 for the keypad’s special functions. . .
PAGE 55
Operating Table 2-2. 53-Key Descriptions Key Description Power (red) Green/Red Dot Powers the mobile computer on and off. Performs a warm boot when held for five seconds and a cold boot when held for 15 seconds. Unassigned function key. (Button includes a green or red dot.) . Scan (yellow) Scan key - used for scanning applications, this key has the same function as pulling the trigger. Scroll Up and Down Moves up and down from one item to another. Increases/decreases specified values.
PAGE 56
2-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 2-2. 53-Key Descriptions (Continued) Key Note Description Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions.Press and release the SHIFT key again to return to the normal keypad functions. Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries. Star Produces an asterisk. Enter Executes a selected item or function.
PAGE 57
Operating 3270 Emulator Keypad The 3270 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-3 on page 2-12 for key and button descriptions and Table 2-6 on page 2-20 for the keypad’s special functions. . . Figure 2-3.
PAGE 58
2-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 2-3. 3270 Emulator Descriptions Key Description Power (red) Green/Red Dot Powers the mobile computer on and off. Performs a warm boot when held for five seconds and a cold boot when held for 15 seconds. Unassigned function key. (Button includes a green or red dot.) . Scan (yellow) Scan key - used for scanning applications, this key has the same function as pulling the trigger.
PAGE 59
Operating Table 2-3. 3270 Emulator Descriptions (Continued) Key Note Description Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions. Press and release the SHIFT key again to return to the normal keypad functions. Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries. Star Produces an asterisk. Enter Executes a selected item or function.
PAGE 60
2-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 5250 Emulator Keypad The 5250 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
PAGE 61
Operating Table 2-4. 5250 Emulator Descriptions Key Description Power (red) Green/Red Dot Powers the mobile computer on and off. Performs a warm boot when held for five seconds and a cold boot when held for 15 seconds. Unassigned function key. (Button includes a green or red dot.) . Scan (yellow) Scan key - used for scanning applications, this key has the same function as pulling the trigger. Scroll Up and Down Moves up and down from one item to another.
PAGE 62
2-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 2-4. 5250 Emulator Descriptions (Continued) Key Description Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions. Press and release the SHIFT key again to return to the normal keypad functions. Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries. Star Produces an asterisk. Enter Executes a selected item or function.
PAGE 63
Operating VT Emulator Keypad The VT emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-5 on page 2-18 for key and button descriptions and Table 2-6 on page 2-20 for the keypad’s special functions. . . Figure 2-5.
PAGE 64
2-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 2-5. VT Emulator Descriptions Key Description Power (red) Green/Red Dot Powers the mobile computer on and off. Performs a warm boot when held for five seconds and a cold boot when held for 15 seconds. Unassigned function key. (Button includes a green or red dot.) . Scan (yellow) Scan key - used for scanning applications, this key has the same function as pulling the trigger.
PAGE 65
Operating Table 2-5. VT Emulator Descriptions (Continued) Key Note Description Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions. Press and release the SHIFT key again to return to the normal keypad functions. Period/Decimal Point Produces a period for alpha entries and decimal point for numeric entries. Star Produces an asterisk. Enter Executes a selected item or function.
PAGE 66
2-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Keypad Special Functions The keypad special functions are color coded on the keypads. For example, on the 53-key keypad, the display backlight icon is blue indicating that the blue function key must be selected first to access the display backlight. On the 43-key keypad, the display backlight icon is white indicating that the display backlight is the default value for that key. Table 2-6.
PAGE 67
Operating Using the Power Button Press the red Power button to turn the mobile computer screen on and off (suspend mode). The mobile computer is on when the screen is on and the mobile computer is in suspend mode when the screen is off. For more information, see Starting the Mobile Computer on page 1-13. The Power button is also used to reset the mobile computer by performing a warm or cold boot. • • Warm Boot (Soft Reset) - Resets the mobile computer.
PAGE 68
2-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Using a Headset You can use a stereo headset to listen to mono audio playback. To use a headset, plug the headset jack into the audio connector on the top of the mobile computer. Ensure that the mobile computer’s volume is set appropriately before putting the headset on. When a headset is plugged into the jack, the speaker is muted. Figure 2-6.
PAGE 69
Operating Today Screen When you turn on the mobile computer for the first time each day (or after 4 hours of inactivity), the Today screen appears. You can also display it by tapping Start - Today. On the Today screen, you can see important information for the day. Tap to switch to a program Tap to change volume or mute all sounds Tap to change the date and time Tap to open an item The day at a glance Tap to create a new item Tap to view connection status Figure 2-7.
PAGE 70
2-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Using the Navigation Bar and Command Bar The navigation bar at the top of the screen displays the active program, various status icons (see Table 2-7) and current time. It also allows you to select programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the Input Panel button. To create a new item in the current program, tap New.
PAGE 71
Operating Status Icons You may see the status icons listed in Table 2-7 on the navigation bar located at the top of the screen. Table 2-7. Status Icons Icon Function Description Speaker Turns all sounds on and off. Battery Backup battery is very low (not enabled). Main battery is charging.* Main battery is low. Main battery is very low. Main battery is full.* Connectivity Connection is active. Synchronization is occurring. No connection.
PAGE 72
2-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Speaker Icon You can adjust the system volume using the Speaker icon in the Navigation bar. 1. Tap the Speaker icon. The Volume dialog box appears. Figure 2-9. Volume Dialog Box 2. Tap and move the slide bar to adjust the volume. 3. Select the On or Off radio button to turn the volume on or off. Note The system volume can also be adjusted using the Sounds & Notifications window.
PAGE 73
Operating Battery Icon Battery icons display on the Navigation Bar when the main battery or backup battery power falls below a predetermined level. A Battery dialog box also appears indicating the status of the main or backup battery. On mobile computers with color displays, the Main Battery Low text is blue and the Main Battery Very Low text is red. Figure 2-10. Battery Status Dialog Box Note The battery status can also be viewed using the Power window. See Power on page 3-43 for more information.
PAGE 74
2-28 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Connectivity Icon The Connectivity icon indicates the communication status of the mobile computer when it’s connecting to the internet or host computer. Figure 2-11.
PAGE 75
Operating Time Icon The Time icon displays the current time in a digital or analog format. To change the time format, tap and hold the Time icon until a menu appears. Select the format you want. Digital Clock Analog Clock Figure 2-12. Time Icon Format Menu To display current date, time and appointments: 1. Tap the Time icon to display the Time and Next Appointment dialog box. Battery Status Icon Upcoming Appointments Current Date and Time Figure 2-13.
PAGE 76
2-30 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 2. The dialog box displays the current date and time, the battery status and any upcoming appointments in the Calendar. Instant Message Icon The Instant Message icon notifies you when MSN Messenger has received a new incoming message. See MSN® Messenger on page 7-27 for more information. Figure 2-14.
PAGE 77
Operating E-Mail Icon The E-Mail icon notifies you when you have received incoming e-mails. See Inbox on page 7-15 for more information. Figure 2-15. New E-mail Messages Dialog Box Multiple Notification Icon The Multiple Notification icon appears when two or more message notifications occur. Tap the icon to display the multiple notification icons. Figure 2-16.
PAGE 78
2-32 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Selecting Programs To select a program, tap Start - Programs, then the program name. (To select which programs appear on the Program menu, see Chapter 3, Settings.) Figure 2-17. Start Menu Note Some programs have abbreviated labels for check boxes and drop-down list. To see the full label, hold the stylus on the label. Drag the stylus off the label so that the command is not carried out.
PAGE 79
Operating Using Pop-up Menus With pop-up menus, you can quickly choose an action for an item. For example, use the pop-up menu in the contact list to delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program. To access a pop-up menu, hold the stylus on the item you want to perform the action on.
PAGE 80
2-34 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Notifications The mobile computer notifies you when you have something to do. For example, if you've set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock, you'll be notified in any of the following ways: • • a message box appears on the screen a sound, which you can set, is played.
PAGE 81
Operating To show or hide the input panel, tap the Input Panel button. Tap the arrow next to this button to view input methods. Select an input method. Tap to see choices. Input Panel Button Figure 2-19. Input Panel Button When you use the input panel, the mobile computer anticipates the word you are typing or writing and displays it above the input panel. When you tap the displayed word, it is inserted into the text at the insertion point.
PAGE 82
2-36 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 2. On the Soft Keyboard, tap the keys with the stylus. Tap here if this is the right word. Figure 2-21. Soft Keyboard Using the Block Recognizer To use the Block Recognizer: 1. Tap the arrow next to the Input Panel button, then Block Recognizer. 2. Write a letter in the left side of the box, or a number in the right side, using special character strokes. Figure 2-22.
PAGE 83
Operating 2. Write letters or numbers in the writing area, just as you would on paper. Write capital letters in the left side of the box, numbers in the right side, and lower case letters in the center. Figure 2-23. Letter Recognizer When you write a letter, it is converted to typed text on the screen. For specific instructions on using Letter Recognizer, with Letter Recognizer open, tap the question mark next to the writing area. Using the Transcriber To use Transcriber: 1.
PAGE 84
2-38 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG To write on the screen, tap the Pen button to switch to writing mode. Lines appear on the screen to guide you. Tap the Pen button and use the stylus like a pen. Figure 2-25. Writing on the Screen Note Some programs that accept writing do not have the Pen button. See the documentation for that program to find out how to switch to writing mode. Converting Writing to Text To convert the writing to text, tap Tools - Recognize.
PAGE 85
Operating To convert certain words, select them before tapping Recognize on the Tools menu (or tap and hold the selected words, then tap Recognize on the pop-up menu). If a word is not recognized, it is left as writing. Select the text you want to convert and tap Recognize on the pop-up menu. The writing is turned into text. Figure 2-26. Writing on the Screen If the conversion is incorrect, select different words from a list of alternates or return to the original writing.
PAGE 86
2-40 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG words appears. Tap the word you want to use, or tap the writing at the top of the menu to return to the original writing. Tap to return to the original writing. Or, tap the word you want to use. Figure 2-27. Alternate List Writing Tips • • • • • • Write neatly. Write on the lines and draw descenders below the line. Cross off the "t" and write apostrophes below the top line so they are not confused with the word above.
PAGE 87
Operating Selecting Text To edit or format typed text, select it by dragging the stylus across the text. Cut, copy, and/or paste text by holding the selected words then tapping an editing command on the pop-up menu, or by tapping the command on the Edit menu. Selecting Writing To select writing to edit or format: 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Drag the stylus across the text.
PAGE 88
2-42 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Drawing on the Screen Drawing on the screen is similar to writing on the screen. To create a drawing, cross three ruled lines on the first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines are treated as writing. The drawing box indicates the boundaries of the drawing. Pen button. Figure 2-28.
PAGE 89
Operating Recording a Message You may record a message to capture thoughts, reminders, and phone numbers. In Calendar, Tasks, and Contacts, you can include a recording in the Notes tab. In the Notes program, you can either create a stand-alone recording or include a recording in a written note. To create a recording: 1. Start the Notes application. 2. Tap the Record icon to begin recording. 3. Hold the mobile computer’s microphone near your mouth or other source of sound. Indicates an embedded recording.
PAGE 90
2-44 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Using My Text When using Inbox or MSN Messenger, use My Text to quickly insert preset or frequently used messages into the text entry area. To insert a message, tap My Text and tap a message. Tap to select a prewritten message. Figure 2-30. Using My Text You can add text after inserting a My Text message before sending it. Note To edit a My Text message, tap Tools - Edit - My Text Messages.
PAGE 91
Operating Entering Data An integrated bar code scanner or imager on the mobile computer can scan data into data fields, using a scan or image application, in the same way data is entered via the keyboard. In addition, mobile computers with an integrated imager can capture and store still images. For more information, see page B-14 and Launching ImagerSample on page C-3. Finding Information The Find feature locates information. Tap Start - Find to launch this feature.
PAGE 92
2-46 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Data Capture Mobile computers with an integrated laser scanner allow you to collect data by scanning one dimensional bar codes. Mobile computers with an integrated imager allow you to collect data by decoding one dimensional bar codes (including RSS) and two dimensional bar codes (including PDF417 and DataMatrix), and capture and download images to a host for a variety of imaging applications.
PAGE 93
Operating Operational Modes Mobile computers with an integrated imager have two modes of operation: Decode Mode and Image Capture Mode. Both modes are activated by pulling the trigger. Decode Mode In this mode, upon pulling the trigger, the Imager attempts to locate and decode enabled bar codes within its field of view. The Imager remains in this mode as long as the trigger is pulled, or until a bar code is decoded.
PAGE 94
2-48 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Note Contact the Symbol Support Center if chronic scanning difficulties develop. Decoding of properly printed bar codes should be quick and effortless. Scanning Bar Codes 1. Ensure that a scan enabled application is loaded on the mobile computer. 2. Aim the scan exit window at the bar code. 3. Pull the trigger. • For mobile computers with a laser scanner, ensure the red scan beam covers the entire bar code.
PAGE 95
Operating code was decoded successfully. Linear bar code PDF417 symbol Symbol View Finder (Aiming Pattern) Correct Figure 2-33. Bar Code Centered in Aiming Pattern Correct Incorrect Figure 2-34. Bar Code Not Centered in Aiming Pattern 4. Release the trigger. Note Imager decoding usually occurs instantaneously. The mobile computer repeats the steps required to take a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled.
PAGE 96
2-50 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Note Scanning procedures depend on the application and mobile computer configuration. An application may use different scanning procedures from the one listed above. Scan LED Indicator The Indicator LED bar on the mobile computer provides a visual indication of the scan status. See Figure 1-1 on page 1-3 for the location of the Indicator LED bar. Table 2-8. Scan LED Indicators LED Status Indication Off Not scanning.
PAGE 97
Operating Resetting the Mobile Computer If the mobile computer stops responding to input, reset it. There are two reset functions, warm boot and cold boot. A warm boot restarts the mobile computer by closing all running programs. A cold boot also restarts the mobile computer, but erases all stored records and entries in RAM. Data saved in flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the factory default settings. Perform a warm boot first.
PAGE 98
2-52 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 3. Calibrate the screen. See Align Screen on page 1-14 to calibrate the mobile computer screen.
PAGE 99
Settings Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 5 Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Personal Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 100
3-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Owner Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Passwords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 101
Settings Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remove Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Symbol Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wakeups. . . . . . . . . .
PAGE 102
3-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 103
Settings Introduction This chapter provides basic instructions for customizing the mobile computer by adjusting settings. Adjusting Settings To view available options for the mobile computer settings, tap Start - Settings. You can adjust settings in either the Personal tab or the System tab. Personal Tab Figure 3-1. Settings - Personal Tab Table 3-1 lists the applications available in the Personal tab. Table 3-1. Personal Tab Applications Icon Description Customize Up/Down key control.
PAGE 104
3-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 3-1. Personal Tab Applications (Continued) Icon Description Configure the items that appear in the Start menu. See Menus on page 3-14 for more information. Change owner's personal profiles. See Owner Information on page 3-16 for more information. Change owner's password and set security options. See Passwords on page 3-19 for more information.
PAGE 105
Settings System Tab Color Display Monochrome Display Figure 3-2. Settings - System Tab Table 3-2 lists the applications available in the System tab. Table 3-2. System Tab Applications Icon Description Provides device information and name. See About on page 3-26 for more information. Customize when and for how long the backlight should stay on. See Backlight on page 3-29 for more information.
PAGE 106
3-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 3-2. System Tab Applications (Continued) Icon Description Adjust the contrast on the display (monochrome displays only). See Contrast (Monochrome Devices Only) on page 3-39 for more information. Adjust the allocation of storage and program memory. See Memory on page 3-40 for more information. View battery status and change power management options. See Power on page 3-43 for more information.
PAGE 107
Settings Connections Tab Figure 3-3. Settings - Connections Tab Table 3-2 lists the applications available in the System tab. Table 3-3. System Tab Applications Icon Description Currently not supported. Currently not supported. Change connection information. See Connecting to the Internet on a Wireless Network on page 421 for more information. Modify wireless Ethernet settings. See Wireless Ethernet on page 3-56 for more information.
PAGE 108
3-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Buttons Use the Buttons window - Up/Down Control tab to customize Up/Down key control. Program Buttons The Program Buttons tab is currently not supported. Refer to the Windows CE Help File for Symbol Terminals for information about keypad mapping. Up/Down Control To set the key repeat rate: 1. Tap Start - Settings - Personal tab - Buttons icon - Up/Down Control tab. Figure 3-4. Buttons Window - Up/Down Control Tab 2.
PAGE 109
Settings Input Use the Input window to switch input methods and set input options. Input Method To select an input method: 1. Tap Start - Settings - Personal tab - Input icon - Input Method tab. Figure 3-5. Input Window - Input Method Tab 2. From the Input method: drop-down list, select the input method. 3. Make any additional desired changes to the settings. 4. Tap ok.
PAGE 110
3-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Word Completion To adjust how suggested words pop-up in a window above the input panel: 1. Tap Start - Settings - Personal tab - Input icon - Word Completion tab. Figure 3-6. Input Window - Word Completion Tab 2. Make the desired changes to the settings. 3. Tap ok.
PAGE 111
Settings Options To adjust the options for writing and recording: 1. Tap Start - Settings - Personal tab - Input icon - Options tab. Figure 3-7. Input Window - Options tab 2. Make the desired changes to the settings. 3. Tap ok.
PAGE 112
3-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Menus Use Menus window to change the items that appear in the Start menu. Start Menu To change the items that appear in the Start menu: 1. Tap Start - Settings - Personal tab - Menus icon - Start Menu tab. Figure 3-8. Menus Window - Start Menu Tab 2. Select the programs that you want to appear in the Start menu. 3. Tap ok. You can create subfolders and shortcuts to appear under Start menu.
PAGE 113
Settings New Menu To enable the New menu: Tap Start - Settings - Personal tab - Menus icon - New Menu tab. Figure 3-9. Menus Window - New Menu Tab 1. Select the Turn on the New button menu check box. 2. Select the items to appear on the menu. An arrow appears next to New in the command bar of certain programs such as Pocket Word, Pocket Excel, Contacts, Calendar, and Tasks. You can tap this arrow and then tap a new item to create. 3. Tap ok.
PAGE 114
3-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Owner Information Use the Owner Information window to enter information about the owner. The information can be displayed when the mobile computer is turned on. Identification To enter personal information: 1. Tap Start - Settings - Personal tab - Owner Information icon - Identification tab. Figure 3-10. Owner Information Window - Identification Tab 2. Fill in or edit the data as desired. 3.
PAGE 115
Settings Notes To add more information about the owner: 1. Tap Start - Settings - Personal tab - Owner Information icon - Notes tab. Figure 3-11. Owner Information Window - Notes Tab 2. Enter information in the Notes: box. 3. To have this information display when you start the mobile computer, select the Show information when device is turned on check box. 4. Tap ok.
PAGE 116
3-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG After the information is entered and the Show information when device is turned on check boxes are selected, the Welcome window appears whenever the mobile computer is powered on. Tap the screen with the stylus to exit the Welcome window. Figure 3-12.
PAGE 117
Settings Passwords Use the Password window to set a password to disable unauthorized access to the mobile computer. Password If the device is configured to connect to a network, use a strong (difficult to figure out) password to help protect network security. Password cracking tools continue to improve and the computers used to crack passwords are more powerful than ever.
PAGE 118
3-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG a. In the Password: field, enter a seven character password. A strong password must contain at least seven characters that are a combination of uppercase and lowercase letters, numerals, and punctuation. Figure 3-14. Alphanumeric Password b. In the Confirm: field, re-enter the password. 7. Tap ok.
PAGE 119
Settings Hint To set hint so that you can remember the password: 1. Tap Start - Settings - Personal tab - Password icon - Hint tab. Figure 3-15. Password Window - Hint Tab 2. In the text box, enter a password hint that would remind you of the password you set. 3. Tap ok.
PAGE 120
3-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Sounds & Notifications Use the Sounds & Notifications window to set event sounds and volume options. Volume To adjust the system volume and enable event sounds: 1. Tap Start - Settings - Personal tab - Sounds & Notifications icon - Volume tab. Figure 3-16. Sounds & Notifications Window - Volume Tab 2. Use the slide bar to change the system volume. 3. Select the desired Enable Sound options.
PAGE 121
Settings Notifications On the Notifications tab, you can customize how you are notified about different events. 1. Tap Start - Settings - Personal tab - Sounds & Notifications icon - Notifications tab. Figure 3-17. Sounds & Notifications Window - Notifications Tab 2. 3. 4. 5. Select the event name from the Select an event list drop-down list. Select the Play sound check box to enable the sound notification. Select a sound from the drop-down list. Tap ok.
PAGE 122
3-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Today Use the Today window to customize the Today screen. Appearance To change the appearance of the Today screen: 1. Tap Start - Settings - Personal tab - Today icon - Appearance tab. Figure 3-18. Today Window - Appearance Tab 2. Select the desired theme for the Today screen background. To use your own background, select Use this picture as the background check box and tap Browse to locate the desired file on the mobile computer. 3.
PAGE 123
Settings Items To select items that appear on the Today screen: 1. Tap Start - Settings Personal tab - Today icon - Appearance tab. Figure 3-19. Today Window - Items Tab 2. Select the items you want to appear on the Today screen. To customize the information further, select an information type, and then tap Options (not available for all information types). 3. Tap ok.
PAGE 124
3-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG About Use the About window to view general system properties, change memory settings, input device name and view copyright information. Version The Version tab view displays general system settings: 1. Tap Start - Settings - System tab - About icon - Version tab. Figure 3-20. About Window - Version Tab 2. Tap ok.
PAGE 125
Settings Device ID The Device ID tab allows you to customize the name and description of the mobile computer: 1. Tap Start - Settings - System tab - About icon - Device ID tab. Figure 3-21. About Window - Device ID Tab 2. In the Device name: field, enter a name for the mobile computer. Ensure that you do not use spaces. 3. In the Description: field, enter a description for the mobile computer. 4. Tap ok.
PAGE 126
3-28 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Copyrights The Copyrights tab allows you to view any relevant copyright information. 1. Tap Start - Settings - System tab - About icon - Copyrights tab. Figure 3-22. About Window - Copyrights Tab 2. Tap ok.
PAGE 127
Settings Backlight Use the Backlight window to conserve battery power, to turn off the backlight when the mobile computer is idle and to adjust the brightness level. You also have options to turn on the backlight when you tap the screen or press a key. Battery Power To set the backlight settings when using battery power: 1. Tap Start - Settings - System tab - Backlight icon - Battery Power tab. Figure 3-23. Backlight Window - Battery Power Tab 2. Make the desired selections.
PAGE 128
3-30 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 3-4. Battery Power Backlight Settings Status On Battery Power Conditions of light On/Off Default (Cold Boot) Select the Turn off backlight if device is not used for check box to turn off the backlight after a certain period of time has passed unused. Period of time can be selected from the list. Available timings are 10 sec, 30 sec, 1 min, 2 min, 3 min, 4 min and 5 min. Check box is selected. Default time is one minute.
PAGE 129
Settings External Power To set the backlight settings when using external AC power: 1. Tap Start - Settings - System tab - Backlight icon - External Power tab. Figure 3-24. Backlight Window - External Power Tab 2. Make the desired selections. See Table 3-5 for backlight settings. 3. Tap ok. Table 3-5.
PAGE 130
3-32 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Brightness To set the screen’s brightness level: 1. Tap Start - Settings - System tab - Backlight icon - Brightness tab. Figure 3-25. Backlight Window - Brightness Tab 2. Select the Turn off backlight check box to cancel the touch screen’s backlight feature. or Use the stylus to drag the brightness control to the desired brightness level. 3. Tap ok.
PAGE 131
Settings Certificates On the mobile computer you can add and delete public key certificates. These certificates help establish your identity when you are logging onto a secured network, such as a corporate network. Certificates also help establish the identity of other computers, such as servers, with which you connect. This helps prevent unauthorized users from accessing the mobile computer and information.
PAGE 132
3-34 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Root 1. Tap Start - Settings - System tab - Certificates icon - Root tab. Figure 3-27. Certificates Window - Root Tab The list box displays the name of the certificate issuer and the expiration date. 2. To view more information about a certificate, select it from the list box. 3. To delete a certificate, tap and hold it in the list box, and then tap Delete. 4. Tap ok.
PAGE 133
Settings Clock Use the Clock window to change the date, time, time zone and set alarms. Time To set the date, time and time zone: 1. Tap Start - Settings - System tab - Clock icon - Time tab. Figure 3-28. Clock Window - Time Tab 2. Select the Home radio button. 3. Select the current time zone from the time zone drop-down list. 4. To set the hour: a. Tap on the hour field and use the up and down arrows to the right of the time to adjust the hour. or b.
PAGE 134
3-36 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 6. To set the date, tap in the date field. 7. Tap the down arrow to the right of the date field. The calendar appears. Figure 3-29. Calendar 8. To select the month and year, tap the arrows to the right or left of the month until the current month displays. 9. Tap the day of the month. The calendar disappears. 10. Tap ok.
PAGE 135
Settings Alarms You can use the mobile computer as a travel alarm clock by setting a wake-up alarm. 1. Tap Start - Settings - System tab - Clock icon - Alarms tab. Figure 3-31. Clock Window - Alarms Tab 2. In the Description field, enter a name for the alarm. 3. Tap the letter(s) representing the day(s) of the week that the alarm be enabled. 4. Tap the bell icon to set alarm features. The alarm settings window appears. Figure 3-32.
PAGE 136
3-38 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 5. 6. 7. 8. Select the Play sound check box to enable a sound when the alarm starts. From the drop-down list, select the sound that plays when the alarm goes off. Select Repeat sound check box to repeat the sound notification. Select Display message check box to enable a message to appear on the screen when the alarm goes off. 9. Tap ok. 10. Tap the time field to set the alarm time. The clock window appears. Figure 3-33.
PAGE 137
Settings Contrast (Monochrome Devices Only) Use the Contrast window to change the date, time, time zone and set alarms. To adjust the contrast on the display: 1. Tap Start - Settings - System tab - Contrast icon. Figure 3-34. Contrast Window 2. Use the stylus to drag the slider to adjust the contrast on the screen. 3. Tap ok to exit.
PAGE 138
3-40 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Memory Use the Memory window to adjust RAM allocation, view storage card memory usage and stop active programs. Main To temporarily adjust the allocation of storage and program memory: 1. Tap Start - Settings - System tab - Memory icon - Main tab. Figure 3-35. Memory Window - Main Tab 2. To adjust RAM allocation move the slider to allocate more memory for programs or storage.
PAGE 139
Settings Storage Card The Storage Card tab displays how much memory is available in a partition in the mobile computer. 1. Tap Start - Settings - System tab - Memory icon - Storage Card tab. Figure 3-36. Memory Window - Storage Card Tab 2. Tap the drop-down list and then the name of the storage card or Flash File partition whose information you want to view. Minimally, the drop-down list always includes the Platform and Application partition. 3. Tap ok.
PAGE 140
3-42 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Running Programs The Running Programs tab displays the list of currently active programs. 1. Tap Start - Settings - System tab - Memory icon - Running Programs tab. Figure 3-37. Memory Window - Running Programs Tab The Running Program List: lists all running (active) programs. 2. To stop an active program, select the program from the Running Program List: list and tap Stop. 3.
PAGE 141
Settings Power Use the Power window to view the status of the main and backup batteries and set power management options. Battery To check the main battery and backup battery status: 1. Tap Start - Settings - System tab - Power icon - Battery tab. Figure 3-38. Power Window - Battery Tab The Battery tab provides general information about battery conditions. The amount of useful operating time remaining varies depending on battery type and how you use the mobile computer. 2. Tap ok.
PAGE 142
3-44 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Wireless To turn the mobile computer's wireless capabilities on and off: 1. Tap Start - Settings - System tab - Power icon - Wireless tab. Figure 3-39. Power Window - Wireless Tab 2. In the list box, select the wireless device check box. 3. Select Wireless signals off radio button or Wireless signals on radio button. 4. Tap ok.
PAGE 143
Settings Advanced You can select options for turning off the mobile computer to conserve battery power. To conserve the most power, select the option to turn off the device after 3 minutes or less. 1. Tap Start - Settings - System tab - Power icon - Advanced tab. Figure 3-40. Power Window - Advanced Tab 2. 3. 4. 5. 6. Select On battery power: Turn off device if not used for check box. Select time value from the drop-down list. Select On external power: Turn off device if not used for check box.
PAGE 144
3-46 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG • • Note Set the mobile computer to turn off when idle. While on battery power, the mobile computer automatically turns off, or suspends operation, if you don't touch the keyboard or use the stylus for three minutes. Maximize battery life by shortening this time. Turn off sounds you don't need. By default, the mobile computer produces sounds in response to a number of events, such as warnings, appointments, and key presses.
PAGE 145
Settings Regional Settings With regional settings, you can change the way the mobile computer displays dates, times, currency amounts, large numbers, and numbers with decimal fractions. You can also choose the metric or U.S. system of measurement. You can also choose from a large number of input locales. When you switch to another input locale, some programs offer special features, such as font characters or spell checkers designed for different languages. 1.
PAGE 146
3-48 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 3. Select the Number tab. Figure 3-42. Regional Settings Window - Number Tab 4. Select the desired options. The characteristics available are determined by the region selected on the Region tab. 5. Select the Currency tab. Figure 3-43. Regional Settings Window - Currency Tab 6. Select the desired options. The characteristics available are determined by the region selected on the Regional tab.
PAGE 147
Settings 7. Select the Time tab. Figure 3-44. Regional Settings Window - Time Tab 8. Select the desired options. The characteristics available are determined by the region selected on the Region tab. 9. Select the Date tab. Figure 3-45. Regional Settings Window - Date Tab 10. Select the desired options. The characteristics available are determined by the region selected on the Region tab. 11. Tap ok.
PAGE 148
3-50 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Remove Programs Use the Remove Programs window to remove programs that were loaded onto the mobile computer: 1. Tap Start - Settings - System tab - Remove Programs icon. Figure 3-46. Remove Programs Window 2. From the Programs in storage memory: list box, select the program you want to remove. 3. Tap Remove. You can only remove programs that you have installed in RAM. Note 4. Tap ok.
PAGE 149
Settings Screen Use the Screen window to align the screen and to enable ClearType fonts. 1. Tap Start - Settings - System tab - Screen icon. Figure 3-47. Screen Window 2. Tap Align Screen. 3. The align screen appears. Tap each target with the stylus and following the on-screen messages. 4. Select the Enable ClearType check box to enable easier reading of text in programs that support ClearType. 5. Tap ok.
PAGE 150
3-52 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Symbol Settings Use the Symbol Settings window to set specific settings for the mobile computer. Wakeups The mobile computer can be configured to wakeup from sleep mode. 1. Tap Start - Settings - System tab - Symbol Settings icon - Wakeups tab. Figure 3-48. Symbol Settings Window - Wakeups Tab 2. Select the Trigger, Any Key and/or Touch Panel check box in the Power Off or Auto Off list box.
PAGE 151
Settings Table 3-6. Wakeup Conditions (Continued) Status Auto Off Description Action When the mobile computer goes into Trigger sleep mode by an automatic powerAny Key off function, these actions wake the mobile computer up. Touch Panel Conditions for wakeup Trigger button is pressed. Any key on the keypad is pressed. Touch screen is tapped. System The System tab displays mobile computer system data. 1. Tap Start - Settings - System tab - Symbol Settings icon - System tab. Figure 3-49.
PAGE 152
3-54 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 3-7. System Tab Data Item Description Format DEVICE ID in Byte format 128-bit unique identifier guaranteed across all mobile computers with Windows® Mobile 2003 Software for Pocket PCs Byte order OEM Name Name of manufacturer’s device. XXXXXX (where X is an alphanumeric character) IPL Version Version of IPL. X.XX (where X is an alphanumeric character) OEM Version Manufacturer’s version. X.
PAGE 153
Settings Config The Config tab displays mobile computer options installed in the device. 1. Tap Start - Settings - System tab - Symbol Settings icon - Config tab. Figure 3-50. Symbol Settings Window - Config Tab 2. In the Config tab you can view the configuration data. 3. Tap ok.
PAGE 154
3-56 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Connections Use the Configure Network Adapters window to modify IP and server addresses for a wireless Ethernet connection. Wireless Ethernet The mobile computer can be configured for a wireless Ethernet connection. 1. Tap Start - Settings - Connections tab - Wireless Ethernet icon. The Configure Network Adapters window appears. Figure 3-51. Configure Network Adapters Window 2.
PAGE 155
Settings 3. In the Tap an adapter to modify settings: list, select the adapter to modify. The IP address window displays. Figure 3-52. Wireless Ethernet - IP Address Window 4. In the IP address window, select the appropriate radio button: • to Use a server-assigned IP address or • to Use a specific IP address. If Use a specific IP address is selected, enter the IP address, Subnet mask, and Default gateway, as needed. 5. Tap the Name Servers tab. The Name Servers window appears. Figure 3-53.
PAGE 156
3-58 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 6. Enter the appropriate DNS, Alt DNS, WINS, and Alt WINS server addresses. 7. Tap ok. 8. Tap ok to confirm the setup. 9. Tap ok to exit.
PAGE 157
Communications Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4- 3 Installing Communication Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Installing ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Setting up a Partnership. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Serial Communication Setup . . .
PAGE 158
4-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 159
Communications Introduction The mobile computer is capable of communicating with a number of hosts, including development computers, serial devices, printers, etc. The available accessories serve as essential data communication devices, enabling the information to be synchronized on the mobile computer with the information on the host device using ActiveSync.
PAGE 160
4-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG • • • • Back up the data stored on the mobile computer. Synchronization is a one-step procedure that ensures the data is always safe and up-to-date. Copy (rather than synchronize) files between the mobile computer and host computer. Control when synchronization occurs by selecting a synchronization mode, e.g.
PAGE 161
Communications To set up a partnership: 1. If the Get Connected window does not appear on the host computer, select Start - Programs - Microsoft ActiveSync - File - Get Connected. Figure 4-1. Get Connected Window 2. Connect the mobile computer to the host computer using the appropriate Serial connection (see Chapter 8, Accessories). 3. On the host computer, select Next in the Get Connected window.
PAGE 162
4-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 4. The host computer and the mobile computer attempt to synchronize. The New Partnership window appears. Figure 4-2. New Partnership Window 5. Click the Standard partnership radio button and then select Next. The New Partnership/ Specify how to synchronize data window appears. Figure 4-3.
PAGE 163
Communications 6. Click the Synchronize with this desktop computer radio button and select Next. The New Partnership/Select Number of Partnerships window appears. Figure 4-4. How To Sync Window 7. Click the Yes, I want to synchronize with only this computer radio button and then select Next. The New Partnership/Select Synchronization Settings window appears. Figure 4-5. Select Synchronization Settings Window 8. To synchronize a particular type of information, select its check box.
PAGE 164
4-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 9. Select Next. The New Partnership/Setup Complete window appears. Figure 4-6. Setup Complete Window 10. Select Finish. The Microsoft ActiveSync window appears showing the connection status and the data synchronized. Figure 4-7. ActiveSync Connected Window During the first synchronization, information stored on the host computer is copied to the mobile computer.
PAGE 165
Communications Note The first ActiveSync operation must be performed with a local, direct connection. To retain partnerships after a cold boot, capture partnership registry information in a .reg file and save it in the Flash File System. See the Windows CE Help File for Symbol Terminals for details. For more information about using ActiveSync, start ActiveSync on the host computer and see ActiveSync Help.
PAGE 166
4-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 2. Tap Tools - Options on the ActiveSync window to display the PC Synchronization window PC tab. Figure 4-9. PC Synchronization Window -PC Tab 3. Tap Options to display the PC Synchronization Options window. Figure 4-10. PC Synchronization Options Window 4. Select the Enable PC sync using this connection: check box. 5. Select the connection (e.g., serial COM port, USB) for synchronization from the drop-down list.
PAGE 167
Communications 7. Tap ok to exit the PC Synchronization Options window and tap ok to exit the PC Synchronization window. 8. Ensure that ActiveSync is installed on the host computer and a partnership was created. See Installing ActiveSync on page 4-3 and Setting up a Partnership on page 4-4. Setting Up a Connection on the Host Computer 1. Select Start - Programs - Microsoft ActiveSync on the host computer, if it is not already running. The Microsoft ActiveSync window appears. Figure 4-11.
PAGE 168
4-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 2. In the ActiveSync window, select File - Connection Settings. The Connection Settings window appears. Figure 4-12. Connection Settings Window 3. In the Connection Settings window, select the appropriate check box for the type of connection being used. If using a serial connection, select the COM port from the drop-down list.
PAGE 169
Communications 7. Connect the mobile computer to the accessory being used for communication. 8. Power on the mobile computer. 9. If a partnership was already created between the host computer and mobile computer, synchronization occurs automatically upon connection.
PAGE 170
4-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG To install the Cradle Management Software on the host computer, download the latest version of the software from http://devzone.symbol.com. Refer to the instructions included with the software. Installing eConnect Note eConnect is used only when establishing a connection using the Four Slot Ethernet cradle. To install eConnect on the mobile computer: 1.
PAGE 171
Communications 9. On the mobile computer tap Start - Settings - System tab and tap the eConnect icon to display the Settings - eConnect window. Figure 4-13. Settings Windows 10. Confirm that the Serial Port Baud Rate: value is set to USB. If it is not set to USB then use the drop-down menu and tap USB. 11. Tap ok to exit the Settings- eConnect window and tap X to exit the Settings window.
PAGE 172
4-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 3. Click OK. Note Before communicating through an Ethernet connection, create a partnership between the mobile computer and the host computer via a USB connection. See Setting up a Partnership on page 4-4 for detailed instructions.
PAGE 173
Communications To set the IP address: 1. Launch the MobileDox Cradle Manager on the host computer. 2. Click File - Set IP Address of Unlisted Device. The Set IP Address window appears: Figure 4-14. Set IP Address Window 3. Enter the appropriate MAC Address and IP address. 4. Click OK.
PAGE 174
4-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Modifying Cradle Settings 1. 2. 3. 4. Launch the MobileDox Cradle Manager on the host computer. Select the name of the cradle you want to configure from the list. Click Device - Modify Settings. Use the General Settings tab to modify the identification settings of the cradle. Field Description Device Name A text string used to describe the MobileDox device. Any 15-character string may be entered.
PAGE 175
Communications 5. Use the TPC/IP Settings tab to modify the DNS and WINS identification settings of the cradle. Field Description Use DHCP If check box is selected, necessary information is retrieved from the DHCP server. If check box is not selected, static configuration is used (information needs to be entered). IP Address The IP address that the MobileDox uses when communicating on the network. Subnet Mask The subnet mask that the MobileDox uses when communicating on the network.
PAGE 176
4-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 6. Use the Port Settings tab to modify the USB port settings of the cradle. Field Description Port Name A text string used to describe the device attached to the port. Any 15-character string can be entered. You can specify up to four port names, one for each of the cradle’s slots. IP Address The IP address assigned to the cradled device. There should be one IP address per cradle slot.
PAGE 177
Communications Connecting to the Internet on a Wireless Network The MC9010-G and MC9050-G can connect to the Internet across a wireless network. To set up a wireless connection: 1. Tap the Mobile Companion icon on the task tray. The Mobile Companion menu appears. Mobile Companion Menu Mobile Companion Icon Figure 4-18. Mobile Companion Menu 2. Tap Find WLANs. The Mobile Companion window appears. Figure 4-19. Mobile Companion Window 3. The terminal tries to locate Access Points (APs) in the area.
PAGE 178
4-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 5. The Mobile Companion Mode tab appears. Figure 4-20. Mobile Companion - Mode Tab 6. The profile name and ESSID name appears in the respective fields. 7. In the Operating Mode: list, select Infrastructure. 8. Tap the Encryption tab. Figure 4-21. Mobile Companion - Encryption Tab 9. Select the encryption algorithm used on the wireless network (Open System, 40-bit Shared Key, 128-bit Shared Key or Kerberos).
PAGE 179
Communications 10. Tap the IP Config tab. Figure 4-22. Mobile Companion - IP Config Tab (DHCP) 11. Select either DHCP or Static from the IP Type drop-down list. 12. If you select Static IP, enter the required data in the fields that appear in the window. See your network administrator for this information. 13. Tap ok. 14. Tap ok. 15. The Mobile Companion wireless status icon should indicate that the terminal is connected to the AP.
PAGE 180
4-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 17. Tap Network Card. The Configure Network Adapters window appears. Figure 4-24. Configure Network Adapters Window 18. Select The Internet from the My network card connects to: drop-down list. 19. Select 802.11b Wireless LAN from the Tap an adapter to notify settings: list box. The 802.11b Wireless LAN window appears. Figure 4-25. 802.
PAGE 181
Communications 20. Tap ok. A notification window appears indicating that the next time the adapter (radio card) is used it will have the new settings. Figure 4-26. Adapters Message Window 21. 22. 23. 24. Tap ok. Tap ok. Tap ok. Tap Start - Programs - Internet Explorer. The Pocket Internet Explorer window appears. Figure 4-27. Pocket Internet Explorer Window 25. In the address bar, enter the URL for a web site.
PAGE 182
4-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 183
Spectrum24 Configuration Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5- 3 Mobile Companion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Finding WLANs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 184
5-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 185
Spectrum24 Configuration Introduction Wireless LANs allow mobile computers to communicate wirelessly, and to send captured data “real time” to a host device. Before a mobile computer can be used on a Spectrum24 LAN, your facility must be set up with the equipment required to run the wireless LAN and the mobile computer must be properly configured. Refer to the documentation that came with your Access Points (APs) for instructions on setting up the required hardware.
PAGE 186
5-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG icon changes in real-time to reflect the signal strength and availability of the adapter and the wireless network. Tap the icon on the task tray to open the Mobile Companion menu. Mobile Companion Menu Mobile Companion Icon Figure 5-1. Mobile Companion Menu When the menu opens, select Status, WLAN Profiles, Find WLANs or Options from menu. Table 5-1.
PAGE 187
Spectrum24 Configuration Table 5-1. Mobile Companion Menu Descriptions (Continued) Menu Item Description Find WLANs Displays a list of Spectrum24 networks (APs and networked peers) available to the mobile computer for association. The networks are listed by their ESSID. To the right of each network is a signal strength icon. Networks with a signal strength of Good (three green bars out of five) or better should be considered for connection.
PAGE 188
5-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 2. Tap Connect. The Mode tab appears. Ad Hoc Mode Infrastructure Mode Figure 5-3. Mode Tab 3. The Profile Name: and 802.11 ESSID: fields are populated with the name and (WLAN) identifier of the network connection. You can change the Profile Name: if desired. Use the Profile Name field to enter the name of the mobile computer profile used to transmit with either an AP or another networked computer. The ESSID is the 802.
PAGE 189
Spectrum24 Configuration Ad Hoc Select Ad Hoc to enable the mobile computer to form its own local network where mobile computers communicate peer-to-peer without APs using a shared ESSID. Select the Long preamble check box if the mobile computer and its profile are using a long preamble when transmitting data. A long preamble is approximately 8 bytes of the packet header attached to the packet prior to transmission. Devices in Ad Hoc mode are required to use the same preamble length to interoperate.
PAGE 190
5-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG If an AP is set to 40-bit and a mobile computer is set to 128-bit the mobile computer can associate with the AP, but no data transmission and reception can take place. 7. Select one of the following Encryption options from the Algorithm: drop-down list: Open System (no encryption) Use the Open System option as the default setting when no data packet encryption is needed over the network.
PAGE 191
Spectrum24 Configuration Select Kerberos and enter the key distribution center (KDC) and Realm values. The KDC is located on a server and maintains information about the APs and users it supports. The KDC also permits the transmission and receipt of data once the credentials of the user are verified. Enter the name of the server that hosts the Kerberos KDC in the Realm field. LEAP LEAP (Lightweight Extensible Authentication Protocol) is an 802.
PAGE 192
5-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG addresses used by the mobile computer profile. Figure 5-6. Mobile Companion - IP Config Tab (Static) IP Address The Internet is a collection of networks with users that communicate with each other. Each communication carries the address of the source and destination networks and the particular machine within the network associated with the user or host computer at each end.
PAGE 193
Spectrum24 Configuration 9. Select the Power tab to set the Radio Transmission Power level and the Power Saving Modes for the mobile computer profile. Infrastructure Mode Ad Hoc Mode Figure 5-7. Mobile Companion - Power Tab Adjusting the Radio Transmission Power level enables you to expand or confine the transmission area with respect to other wireless devices that could be operating nearby.
PAGE 194
5-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG The Automatic Power Saving Mode switches to Best Network Performance when an AC power supply is detected. If a battery is used, an appropriate setting between Best Network Performance and Acceptable Network Performance is automatically chosen based on a realtime analysis of network usage. The Automatic Power Saving Mode is the default setting and extends the operating time before the battery is recharged.
PAGE 195
Spectrum24 Configuration Note The Signal tab is view only and is not available if the current operating mode is Ad Hoc. Missed Beacons Displays the amount of beacons (uniform system packets broadcast by the AP to keep the network synchronized) missed by the mobile computer. The fewer the missed beacons the better the signal. As long as the LED to the right of the graph is green the AP association is not jeopardized by an excess of missed AP beacons.
PAGE 196
5-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Version Information Displays the mobile computer's software, driver, firmware and hardware versions as well as country information. This data is consistent for the mobile computer regardless of which mobile computer profile is the current profile. Current Status Displays the mobile computer’s current Profile Name, ESSID, and Encryption mode. mobile computer performance is displayed using a verbal indicator of signal strength.
PAGE 197
Spectrum24 Configuration IP Address The Internet is a collection of networks with users that communicate with each other. Each communication carries the address of the source and destination networks and the particular machine within the network associated with the user or host computer at each end. This address is called the IP address. Each node on the IP network must be assigned a unique IP address that is made up of a network identifier and a host identifier.
PAGE 198
5-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 5. Select the Ping tab to send and receive ICMP ping packets across the network to the specified IP address. Figure 5-11. Mobile Companion - Ping Tab 6. 7. 8. 9. Select a target device IP address from the IP drop-down list. Select the size of the packet transmission from the Size drop-down list. Tap Start Test to begin the ping test. Tap Stop Test to terminate the ping test.
PAGE 199
Spectrum24 Configuration Selecting the Set Mandatory item prohibits the mobile computer from associating with a different AP. The letter M displays on top of the icon when the Set Mandatory option is selected. Selecting Set Roaming allows the mobile computer to roam to any AP with a better signal. These settings are temporary and never saved to the registry. Tap Refresh to update the list of the APs with the same ESSID. A signal strength value of 32 is the highest possible.
PAGE 200
5-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Setting Options Select Options from the Mobile Companion menu to enable or disable international roaming, configure consumption avoidance capabilities, enable system sounds, and set temporary settings. Figure 5-14. Mobile Companion - Option Settings 1. Select the Access AP networks check box to display available AP networks and their signal strength within the Available WLAN Networks tab.
PAGE 201
Spectrum24 Configuration 1. To create a password, tap Change Password. Figure 5-15. Mobile Companion - Change Password 2. Enter a case sensitive password (10 characters maximum) in the Current Password field and tap OK. To change the current password, enter the current password in the Current Password field and enter a new password in the New Password and Confirm Password fields and tap OK.
PAGE 202
5-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Editing a Profile Select a profile from the list box and tap Edit to display the Mode tab where the ESSID and operating mode can be changed for the profile. Use the Encryption, IP Config, and Power tabs as necessary to edit the profile power consumption and security parameters. Creating a New Profile Tap New to display the Mode tab wherein the profile name and ESSID can be set.
PAGE 203
Spectrum24 Configuration Configuring the Radio Using a Registration File Default settings for the Spectrum24 radio card can be set on the mobile computer using a registration (.reg) file. A sample .reg file is provided as part of the DCP for MC9000w. Edit the file using a text editor. See notes in the sample file for the key information that can be modified. Save this text file as SPECTRUM24DS.REG. Use ActiveSync to copy this file to the Platform folder on the mobile computer.
PAGE 204
5-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG ; TYPE 2 TRILOGY [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Symbol_Technologies-LA4111_Spectrum24_Wireless_LAN_PC_Card-077d] "Dll"="NDIS.dll" "Prefix"="NDS" "Miniport"="NETWLAN" "Index"=dword:00000001 ; TYPE 3 TRILOGY [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Symbol-Spectrum24_LA4100_Series_WLAN_PC_Card-e063] "Dll"="NDIS.
PAGE 205
Spectrum24 Configuration "EncryptionKey3"="295EEC95BE6CD479ED9E512706FA45C54D9A99FC25FD8EB251AC650C8B" "EncryptionKey2"="060105285C8933EEECCA3F7154FB1636A719221BCDDBCCF98FE9600C4A" "EncryptionKey1"="1AA4F34F4E884A1960A63DD9CBB0EEBA2FFA689D16C7751D933D6D0C80" "EncryptionKeyId"=dword:00000001 "PowerIndex"=dword:00000001 "BT_TIME"=dword:00000030 "Diversity"=dword:00000000 "LCachePwd"=dword:1; 0 = Save always in plain text ; 1 = Save until a Warm Boot (not in registry, not in plain text) ; 2 = Do not save pass
PAGE 206
5-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG ;************************************************** ; End of static IP keys ;************************************************** [HKEY_LOCAL_MACHINE\SOFTWARE\Symbol Technologies, Inc.\NICTT] "EncryptionMask"=dword:00000007 "APNetworks"=dword:00000001 "AdHocNetworks"=dword:00000001 "ManualConfig"=dword:00000000 "Sounds"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Symbol Technologies, Inc.\Profiles] "ProfileVersion"="3.7.0.
PAGE 207
Spectrum24 Configuration ; Uncomment the next keys if Static IPs are used ;************************************************** ; "IpAddress"="192.168.1.1"; Replace these IP addresses with the required static values ; "Subnetmask"="192.168.1.2" ; "DefaultGateway"="192.168.1.3" ; "DNS"="192.168.1.4" ; "WINS"="192.168.1.
PAGE 208
5-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 209
AirBEAM Smart Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6- 3 AirBEAM Package Builder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 AirBEAM Smart Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 AirBEAM License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 210
6-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 211
AirBEAM Smart Introduction The AirBEAM Smart product allows specially designed software packages to be transferred between a host server and Symbol wireless handheld devices. Before transfer, AirBEAM Smart checks and compares package version, so that only updated packages are loaded. AirBEAM Smart resides on radio-equipped client devices, and allows them to request, download, and install software, as well as to upload files and status data.
PAGE 212
6-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG AirBEAM Smart Client The AirBEAM Smart Client is installed on the handheld mobile computer. It is configured with the server access information, the names of the packages to be downloaded and other controlling parameters. When the AirBEAM Smart Client is launched, the device connects to the specified FTP server and checks the packages it is configured to look for. If the package version was updated, the client requests the transfer.
PAGE 213
AirBEAM Smart Packages(1) Tab This tab is used to specify the package name of the first four of eight packages that are to be loaded during the AirBEAM synchronization process. The specified package name must correspond to a package that is available on the specified package server. Field Description Package 1 Package name of the first of eight packages. This is an optional field. Package 2 Package name of the second of eight packages. This is an optional field.
PAGE 214
6-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Field Description IP Address The IP Address of the server. It may be a host name or a dot notation format. Directory The directory on the server that contains the AirBEAM package definition files. All AirBEAM package definition files are retrieved from this directory during the package synchronization process. User The FTP user name that is used during the login phase of the package synchronization process.
PAGE 215
AirBEAM Smart Field Description RAM Management This check box specifies whether the automatic RAM management is enabled during the package synchronization process. If enabled, RAM management logic is invoked when there is not enough free disk space to download a package. The RAM management logic attempts to remove any discardable AirBEAM packages resident on the client.
PAGE 216
6-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Field Auto-retry Description This field is used to specify whether the AirBEAM Smart Client automatically retries if there is a failure during the synchronization process. If this feature is enabled, the AirBEAM Smart Client displays a popup dialog indicating the attempt of a retry. The popup dialog is displayed for the number of seconds specified in the Retry Delay field.
PAGE 217
AirBEAM Smart Field Description Use DHCP server This check box control specifies whether the AirBEAM Smart Client uses the DHCP response option 66 to specify the IP address of the FTP/TFTP server. If enabled, special RF network registry settings are required to force the DHCP server to return the "TFTP server name" field (option 66). The special RF network registry settings are included, but commented out, in the radio network registry initialization files (essid_xxxx_yy.reg).
PAGE 218
6-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Automatic Synchronization The AirBEAM Smart Client can be configured to launch automatically using the Misc(1) Preference tab (see Misc(1) Tab on page 6-6). When setting automatic synchronization, use the Auto-load dropdown list to specify how the AirBEAM Smart Client should be invoked automatically when the client device is rebooted. Refer to Misc(1) Tab on page 6-6 for instructions on enabling Auto Sync.
PAGE 219
AirBEAM Smart AirBEAM Staging The AirBEAM Smart staging support is intended to speed up and simplify the process of staging custom or updated operating software onto mobile devices directly from manufacturing. The staging support is part of the AirBEAM Smart CE Client that is integrated into the mobile computer. The AirBEAM Smart support works by defaulting the AirBEAM Client configuration to a known set of values and launching the AirBEAM Smart package download logic.
PAGE 220
6-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 221
Applications Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 3 Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Creating Appointments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Using the Summary Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 222
7-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Creating E-mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Managing E-mail Messages and Folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . Folder Behavior with ActiveSync and Direct Connection to Server. . . . Pocket Word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typing Mode. . . . . . . . . . . . . . . . . . . . . . .
PAGE 223
Applications Introduction The mobile computer includes Calendar, Contacts, Tasks, Inbox, and Notes applications. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Inbox. Using ActiveSync, you can synchronize information in these applications between the host computer and the mobile computer.
PAGE 224
7-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Calendar Use Calendar to schedule appointments such as meetings. You can view appointments in different ways (Agenda, Day, Week, Month, and Year) and easily change views using the View menu. Tap to go to today. Tap to display or edit the appointment details. Tap to create a new appointment. Figure 7-1.
PAGE 225
Applications 3. Tap New. Tap to return to the calendar (the appointment is saved automatically). Tap to choose from predefined text. Tap to choose from previously entered locations. Tap to select a time. Tap to select a date. Notes is a good place for maps and directions. Figure 7-2. Entering an Appointment 4. 5. 6. 7. Using the input panel, enter the subject and a location. Tap first to select the field. If needed, tap the date and time to change them. Enter other desired information.
PAGE 226
7-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Using the Summary Screen When you tap an appointment in Calendar, a summary screen appears. Tap Edit to change the appointment. View appointment details. View notes. Tap to change appointment. Figure 7-3. Appointment Summary Screen Creating Meeting Requests You can use Calendar to set up meetings with users of Outlook or Pocket Outlook.
PAGE 227
Applications Contacts Contacts maintains a list of associates and friends so you can easily locate information at home or on the road. Using the infrared (IR) port, you can share Contacts information with other users.
PAGE 228
7-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 2. Tap New. Tap to return to the contact list (the contact is saved automatically). Scroll to see more fields. Notes is a good place for maps and directions. Figure 7-5. Creating a Contact 3. Using the input panel, enter a name and other contact information. Scroll down to see all fields. 4. To assign the contact to a category, scroll to and tap Categories. Select a category from the drop-down list.
PAGE 229
Applications • Tap Start - Find, enter the contact name, select Contacts for the type, then tap Go. Using the Summary Screen When you tap a contact in the contact list, a summary screen appears. Tap Edit to change the information. View contact details. Tap to view notes. Tap to change contact information. Figure 7-6.
PAGE 230
7-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Tasks Use Tasks to keep a “to do” list. Select the category of tasks you want displayed in the list. Select the sort order of the list. Indicates high priority. Tap to display or edit the task details. Tap and hold to display a pop-up menu of actions. Tap to create a new contact. Figure 7-7. Task Application To change the way information displays in the list, tap Tools - Options. Note To create a task: 1.
PAGE 231
Applications 2. Tap New. Tap to return to the task list (the task is saved automatically). Tap to choose from predefined subjects. Notes is a good place for maps and directions. Figure 7-8. Creating a Task 3. Using the input panel, enter a description in the Subject field. 4. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, hide it to see all available fields. 5.
PAGE 232
7-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Using the Summary Screen When you tap a task in the task list, a summary screen appears. To change the task, tap Edit. View task details. Tap to show and hide additional summary information. View notes. Tap to change task. Figure 7-9.
PAGE 233
Applications Notes Capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it is included in the note as an icon. If the note list is displayed, it is created as a stand-alone recording. Tap to change the sort order of the list. Tap to open a note or play a recording. Tap and hold to display a pop-up menu of actions. Tap to record.
PAGE 234
7-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 3. Create a note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see Chapter 2, Operating. Tap to return to the task list (the task is saved automatically). Tap to show or hide the input panel. Tap to write on the screen. Tap to add a recording to the note. Figure 7-11.
PAGE 235
Applications Inbox Use Inbox to send and receive e-mail messages in the following ways: • • Synchronize e-mail messages with Microsoft Exchange or Outlook on the host computer. Send and receive e-mail messages by connecting directly to an e-mail server through an Internet service provider (ISP) or a network. Synchronizing E-mail Messages To synchronize e-mail messages, first enable Inbox synchronization in ActiveSync options.
PAGE 236
7-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server. Messages are sent as soon as you tap Send, which saves space on the mobile computer. When working offline, once you've downloaded new message headers or partial messages, you can disconnect from the e-mail server, then decide which messages to download completely.
PAGE 237
Applications Using the Message List Messages you receive display in the message list box. By default, the most recently received messages are listed first. Select the service and folder you want to display Select the sort order for messages Tap to open a message Tap and hold to display a pop-up menu of actions Tap to connect and to send and receive e-mail Tap to connect to the selected service Figure 7-12.
PAGE 238
7-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG When you receive a message, tap it in the list box to open it. Unread messages display in bold. Tap to return to the message list. Tap to delete this message. Tap to view the previous or next message. Tap to reply to or forward this message. Figure 7-13.
PAGE 239
Applications • Change options for direct e-mail server connections in Inbox on the mobile computer. Tap Tools - Options. On the Accounts tab, tap the account you want to change. Tap and hold the account and select Delete to remove it. Creating E-mail Messages To create an e-mail message: 1. Tap New. 2. In the To field, enter an e-mail or SMS address of one or more recipients, separating each with a semicolon, or select a name from the contact list by tapping the Address Book icon.
PAGE 240
7-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG If you are sending an SMS message and want to know if it was received, tap Edit - Options, and select the Request SMS text message delivery notification check box before sending the message. Managing E-mail Messages and Folders By default, messages are displayed in one of five folders for each account you've created: Inbox, Deleted Items, Drafts, Outbox, and Sent Items.
PAGE 241
Applications Pocket Word Pocket Word works with Microsoft Word on the host computer to give you access to copies of documents. You can create new documents on the mobile computer, or copy documents from the host computer to the mobile computer. Synchronize documents between the host computer and the mobile computer so that you have the most up-to-date information in both locations.
PAGE 242
7-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG You can enter information in Pocket Word in one of four modes (writing, drawing, typing, and recording) displayed on the View menu. Tap the Show/Hide Toolbar icon on the command bar to show or hide each mode’s toolbar. To change the zoom magnification, tap View - Zoom. Select the percentage. Select a higher percentage to enter text and a lower one to see more of the document.
PAGE 243
Applications Writing Mode In writing mode, use the stylus to write directly on the screen. Ruled lines are displayed as a guide, and the zoom magnification increases to allow you to write more easily. For more information, see Writing on the Screen on page 2-37. With Space button selected, drag to insert space. An arrow appears showing the space direction and size. Tap to highlight selected text. Pen button. Space button. Tap to select formatting options, such as pen weight and line color.
PAGE 244
7-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG stroke within or touching the drawing box becomes part of the drawing. For more information, see Drawing on the Screen on page 2-42. Select Shape on the pop-up menu to convert objects to proper shapes. Resize an object by dragging the selection handles. Tap to select formatting options, such as line weight, fill color, and line color. Tap an arrow to see choices. Pen button. Figure 7-18.
PAGE 245
Applications Pocket Excel Pocket Excel works with Microsoft Excel on the host computer to provide easy access to copies of workbooks. You can create new workbooks on the mobile computer, or copy workbooks from the host computer to the mobile computer. Synchronize workbooks between the host computer and the mobile computer so you have up-to-date content in both locations. To create a new workbook in Pocket Excel, such as an expense report or mileage log, tap Start Programs - Pocket Excel - New.
PAGE 246
7-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Tips for Working in Pocket Excel When working in large worksheets in Pocket Excel: • View in full-screen mode to see as much of the worksheet as possible. Tap View - Full Screen. To exit full-screen mode, tap Restore. • Show and hide window elements. Tap View, then the elements you want to show or hide. • Freeze panes on a worksheet. First select the cell where you want to freeze panes. Tap View - Freeze Panes.
PAGE 247
Applications MSN® Messenger With the MSN Messenger instant messaging program on the mobile computer you can: • • • see who is online send and receive instant messages have instant message conversations with groups of contacts. To use MSN Messenger, you need a Microsoft Passport™ account or a Microsoft Exchange e-mail account. You need a Passport to use MSN Messenger Service. If you have a Hotmail® or MSN account, you already have a Passport.
PAGE 248
7-28 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Working with Contacts The MSN Messenger window is divided into Online and Not Online categories. From this view, while connected, you can chat, send e-mail, block the contact from chatting with you, or delete contacts from the list using the pop-up menu. Tap a contact to start a chat. Tap and hold to display a popup menu of actions. Figure 7-20.
PAGE 249
Applications Chatting with Contacts Tap a contact name to open a chat window. Enter the message in the text entry area at the bottom of the screen, or tap My Text to enter a preset message, and tap Send. To invite another contact to a multi-user chat, tap Tools - Invite and tap the contact you want to invite. Enter a message. Tap to send a message. Figure 7-21. Sending a Message To switch back to the main window without closing a chat, tap Contacts.
PAGE 250
7-30 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG To know if the contact you are chatting with is responding, look for the message under the text entry area. View full chat. View the status of the chat. Figure 7-22. Receiving a Message For more information on using MSN Messenger, tap Start - Help.
PAGE 251
Applications Windows Media Player With Windows Media Player on the mobile computer you can play digital audio and video files that are stored on the mobile computer. To switch to Windows Media Player, tap Start - Windows Media. Indicates the progress of the current track. Slide to adjust volume. Tap to turn volume on/off. Tap to skip to the next song. Tap to play a previous song. Tap to stop. Tap to play or pause. Figure 7-23.
PAGE 252
7-32 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Microsoft Reader Use Microsoft Reader to read eBooks on the mobile computer. Download books to the host computer from a favorite eBook Web site. Then, use ActiveSync to copy the book files to the mobile computer. The books appear in the Reader Library, where you can tap them in the list to open them. Each book consists of a cover page, an optional table of contents, and the pages of the book.
PAGE 253
Applications 3. To open a book, tap its title in the Library list box. Tap to scroll through the Library list. Tap to select a sort order. Tap to specify the books you want to display in the list. Tap to open a book. Tap here to navigate to other parts of the Reader. Reading a Book Each book consists of a cover page, an optional table of contents, and the pages of the book. Navigation options are listed in the bottom portion of the cover page.
PAGE 254
7-34 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG In addition to the text, each book page includes a page number and book title. Tap to select a navigation option. Drag to select text and then tap an option. Tap arrows to turn the page, or tap and hold page # to bring up page riffle. You can also page through a book using the Up/Down arrow keys on the keypad of the mobile computer.
PAGE 255
Applications • top of the book page. A Note icon displays in the left margin. To show or hide the note, tap the icon. • Drawings. When you add a drawing, a Drawing icon appears in the bottom-left corner of the page, and drawing tools appear across the bottom of the page. Draw by dragging the stylus. To see a list of a book's annotations, including bookmarks, highlights, text notes, and drawings, tap Annotations Index on the book's cover page. You can tap an entry in the list to go to the annotated page.
PAGE 256
7-36 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Pocket Internet Explorer With Microsoft Pocket Internet Explorer, you can view Web or Wireless Application Protocol (WAP) pages in the following ways: • • During synchronization with the host computer, download favorite links and mobile favorites stored in the Mobile Favorites subfolder in Internet Explorer on the host computer. Connect to an Internet service provider (ISP) or network and browse the Web.
PAGE 257
Applications tab, specify the number of links deep you want to download. To conserve mobile computer memory, only go one level deep. 6. Synchronize the mobile computer and host computer. Mobile favorites stored in the Mobile Favorites folder in Internet Explorer are downloaded to the mobile computer. If you did not specify an update schedule in step 3, you must manually download content to keep the information updated on the host computer and mobile computer.
PAGE 258
7-38 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 4. Tap Activate. 5. Follow the directions on the screen. You must synchronize the mobile computer with the host computer, then tap My Channels to complete setup. When synchronization is complete, tap AvantGo Channels in the list of favorites to see a few of the most popular channels. To add or remove channels, tap Add or Remove.
PAGE 259
Applications To view mobile favorites and channels, tap Favorites icon to display the list of favorites, then tap the page you want to view. Tap the favorite you want to view. Tap to add or delete a folder or favorite link. Figure 7-25. Mobile Favorites You'll see the page that was downloaded the last time you synchronized with the host computer. If the page is not on the mobile computer, the favorite is dimmed.
PAGE 260
7-40 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Pictures Use Pictures to view .jpg format pictures stored on the mobile computer, send pictures to others, view a slideshow of pictures or set a picture as the background on the Today screen. Copy Pictures to the Device You can copy .jpg pictures from the PC and view them in Pictures. Copy the picture files from the PC to the My Pictures folder, within the My Documents folder on the mobile computer.
PAGE 261
Applications 1. In Pictures, tap the thumbnail of the picture you want to view. 2. Tap to view pictures stored on a storage card. 3. Tap to view pictures stored in the My Pictures folder. View Slideshow of Pictures You can view .jpg pictures as a slideshow. Pictures displays slides of the pictures shown in thumbnail view with 5-second intervals between slides. 1. In Pictures, tap to view pictures as a slideshow. 2.
PAGE 262
7-42 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 263
Accessories Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8- 3 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Cradles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 264
8-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Charging Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Four Slot Spare Battery Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 265
Accessories Introduction Series 9000 accessories provide a wide variety of product support capabilities. Accessories include cradles, keypads, Magnetic Stripe Reader (MSR) and Cable Adapter Module (CAM) snap-ons, four slot spare battery charger, headphone, Multimedia Card (MMC), Secure Device (SD) card, Universal Battery Charger (UBC) adapter, wall mounting bracket and shelf slide. Keypads • Optional keypads include the interchangeable modular application specific keypads listed below.
PAGE 266
8-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Snap-on Modules • • MSR snaps on to the mobile computer and adds magstripe read capabilities. CAM snaps on to the mobile computer and is used to connect cables to the mobile computer. Both of the snap on modules use the cables listed below: • • • • • • AC line cord (country-specific) and power supply, charges the mobile computer. Auto charge cable, charges the mobile computer using a vehicle’s cigarette lighter.
PAGE 267
Accessories Keypads The mobile computer has interchangeable modular keypads. The modular keypads can be changed in the field as necessary to support specialized applications. Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with the keypad detached. Follow proper Electro-Static Discharge (ESD) precautions to avoid damaging the MMC and SD card.
PAGE 268
8-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 3. Replace the keypad and re-attach using the two screws. Figure 8-2. Installing the Keypad 4. Perform a cold boot.
PAGE 269
Accessories Multi Media Card (MMC) / Secure Device (SD) Card The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see Figure 8-1). Note SD cards are inter-operable with MMC cards and can also be used in MC9000 mobile computers. Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with the keypad detached. Follow proper ESD precautions to avoid damaging the MMC/SD.
PAGE 270
8-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Do not apply more than 4 in-lbs of torque when tightening the keypad screws. 5. Replace the keypad and re-attach using the two screws (see Figure 8-2 on page 8-6).
PAGE 271
Accessories Single Slot Serial/USB Cradle This section describes how to set up and use a single Single Slot Serial/USB cradle (Figure 8-4) with the mobile computer. For serial and USB communication setup procedures see, Chapter 4, Communications. Indicator LED Bar Spare Battery Charging Well Spare Battery Spare Battery Charging Well Spare Battery Charging LED Serial Port USB Port Power Port Figure 8-4.
PAGE 272
8-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG • • Charges the mobile computer’s battery. Charges a spare battery. Setup The cradle requires a dedicated port on the host. Note Select either serial or USB for communications. Do not connect the cradle to both serial and USB ports. Serial Port Serial Cable Serial Port USB Port Power Port DC Cable USB Port USB Cable AC Line Cord Power Supply Figure 8-5.
PAGE 273
Accessories Battery Charging Indicators The the Single Slot Serial/USB Cradle can charge the mobile computer’s main battery and a spare battery simultaneously. The mobile computer’s amber charge LED, located in the Indicator LED Bar (see Figure 1-1 on page 13), shows the status of the battery charging in the mobile computer. See Table 1-1 on page 1-9 for charging status indications.
PAGE 274
8-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Four Slot Ethernet Cradle This section describes how to set up and use a Four Slot Ethernet cradle (Figure 8-6) with the mobile computer. For cradle communication setup procedures see, Ethernet Communication Setup on page 4-13. Power Port Ethernet Communication Port Figure 8-6.
PAGE 275
Accessories The Four Slot Ethernet cradle has the following attributes: • • • • Provides 12VDC power for operating the mobile computer. Enables data communication between the mobile computer (up to four) and a host computer, over an Ethernet network (using a standard 10Base-T Ethernet cable). Synchronizes information between the mobile computer and a host computer. (With customized or third party software, it can also be used to synchronize the mobile computer with corporate databases.
PAGE 276
8-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Battery Charging Indicators The mobile computer’s amber charge LED, located in the Indicator LED Bar (see Figure 1-1 on page 13), shows the status of the battery charging in the mobile computer. See Table 1-1 on page 1-9 for charging status indications. The battery usually charges in less than four hours.
PAGE 277
Accessories Four Slot Charge Only Cradle This section describes how to set up and use a Four Slot Charge Only cradle (Figure 8-8) with the mobile computer. Power Port Figure 8-8.
PAGE 278
8-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG The Four Slot Charge Only cradle has the following attributes: • • Provides 12VDC power for operating the mobile computer. Simultaneously charges up to four batteries in the mobile computer. Setup DC Cable AC Line Cord Power Supply Figure 8-9.
PAGE 279
Accessories Four Slot Spare Battery Charger This section describes how to set up and use the Four Slot Spare Battery Charger (Figure 8-4) to charge up to four MC9000-G spare batteries. Spare Battery Spare Battery Charging Well Spare Battery Charging LEDs (4) Power Port Figure 8-10.
PAGE 280
8-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Setup DC Cable AC Cord Power Supply Figure 8-11. Four Slot Spare Battery Charger Power Connection Spare Battery Charging with the Four Slot Spare Battery Charger 1. Connect the charger to a power source as shown in Figure 8-11. 2. Insert the battery into a spare battery charging slot and gently press down on the battery to ensure proper contact.
PAGE 281
Accessories Table 8-2. Spare Battery LED Charging Indicators (Continued) LED Indication Slow Blinking Amber Spare battery is charging. Solid Amber Charging complete. Magnetic Stripe Reader This section describes how to set up and use the snap-on MSR with the mobile computer. The MSR snaps on to the bottom of the mobile computer and can be easily removed when not in use. Latches Card Reader Slot Pogo Pin Pass-through Connector Latch Grip Communications Port Power Port Figure 8-12.
PAGE 282
8-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG When attached to the mobile computer, the MSR has the following attributes: • • • • • Provides power for operating the mobile computer, with the appropriate power connection. Allows the mobile computer to capture data from magnetic stripe cards. (To download MSR data capture software, visit: http://devzone.symbol.com.
PAGE 283
Accessories To remove, squeeze the latch grips and pull the MSR from the mobile computer. Note Remove the MSR from the bottom of the mobile computer before using a cradle for charging and communication. Setup Cigarette Lighter OR AC Power Supply Vehicle Power Supply Figure 8-14. MSR Power Connection Serial Port To Device Serial/ USB Port Figure 8-15.
PAGE 284
8-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Battery Charging Indicators To charge the mobile computer’s battery through the MSR, connect the power supply to the MSR (see Figure 8-14 on page 8-21), then attach the MSR to the mobile computer. The mobile computer begins charging automatically. The mobile computer’s amber charge LED, located in the Indicator LED Bar (see Figure 1-1 on page 13), shows the status of the battery charging in the mobile computer.
PAGE 285
Accessories from right to left. For best results, gently press down on the card while swiping to ensure contact with the bottom of the reader. Figure 8-16.
PAGE 286
8-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Cable Adapter Module This section describes how to set up and use the snap-on CAM with the mobile computer. The CAM snaps on to the bottom of the mobile computer and can be easily removed when not in use. Latches Pogo Pin Pass-through Connector Latch Grip Communications Port Power Port Figure 8-17. Cable Adapter Module When attached to the mobile computer, the CAM can perform the following functions.
PAGE 287
Accessories Attaching and Removing To attach, snap the CAM onto the bottom of the mobile computer. Latch Grip (one on each side) Figure 8-18. Attaching the CAM To remove, squeeze the latch grips and pull the CAM from the mobile computer. Note Remove the CAM from the bottom of the mobile computer before using a cradle for charging and communication.
PAGE 288
8-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Setup OR AC Power Supply Cigarette Lighter Vehicle Power Supply Figure 8-19. CAM Power Connection Serial Port To Device Serial/ USB Port Figure 8-20. CAM Serial Connection Battery Charging Indicators To charge the mobile computer’s battery through the CAM, connect the power supply to the CAM (see Figure 8-19 on page 8-26), then attach the CAM to the mobile computer. The mobile computer begins charging automatically.
PAGE 289
Accessories The mobile computer’s amber charge LED, located in the Indicator LED Bar (see Figure 1-1 on page 13), shows the status of the battery charging in the mobile computer. See Table 1-1 on page 1-9 for charging status indications. The battery usually charges in less than four hours, if the mobile computer is not in use. Serial/USB Connection The CAM can connect to and communicate with a serial/USB device, such as a printer or host computer, through its serial port.
PAGE 290
8-28 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Universal Battery Charger (UBC) Adapter This section describes how to use the UBC adapter to charge a spare battery. The UBC can be used with a power supply as a standalone spare battery charger or it can be used with the four station UBC2000 to provide charging to simultaneously charge up to four spare batteries. For additional information about the UBC2000, see the UBC 2000 Universal Battery Charger Product Guide (p/n 70-33188-xx).
PAGE 291
Accessories Setup DC Cable AC Line Cord Power Supply Figure 8-22. UBC Adapter Power Connection Battery Charging Indicators To charge a spare battery using the UBC adapter, connect the power supply to the UBC (see Figure 822 on page 8-29), then insert the spare battery. The spare battery begins charging automatically. The UBC’s charge LEDs (see Figure 8-23)) show the status of the battery charging in the adapter. Table 8-3 shows battery charging status indications.
PAGE 292
8-30 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG The battery usually charges in three hours. POWER READY or STANDBY or FAULT (Green) (Flashing Yellow) (Solid Yellow) CHARGING (Solid Yellow) Figure 8-23. UBC Adapter LEDs Table 8-3. UBC Adapter Charge LED Status Indications LED Indication Description POWER Green Power is connected to the UBC Adapter. READY or Green Charging complete.
PAGE 293
Accessories Wall Mounting Bracket and Shelf Slide This section describes how to install and set up the MC9000 Wall Mount Bracket and Shelf Slide to mount cradles to a wall. Wall Mounting Bracket Shelf Slides Mounts one single slot cradle Mounts two single slot cradles Figure 8-24. Wall Mounting Bracket with Shelf Slide When installed on a wall, the mounting bracket and shelf slide enable mounting one or two single slot cradles to a wall. Use two brackets to mount a four slot cradle. Figure 8-25.
PAGE 294
8-32 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Installing the Wall Mount Bracket To install the wall mount bracket for use with one or two single slot cradles or four slot chargers, place the smaller surface of the bracket against the wall or vertical support structure, and secure with four 1/4” screws (use two of the three screw holes in each row). Insert screws Insert screws Figure 8-26.
PAGE 295
Accessories 2. Secure the slide to the bracket by inserting the two pan-head screws provided from below the bracket, up through the bracket’s screw holes and then through the slide’s pan-head screw holes. Pan-head Screw Holes Insert screws from below Figure 8-27. Attaching One Shelf Slide Two Single Slot Cradles/Four Slot Battery Chargers To attach the shelf slide to the wall mount bracket for use with two single slot cradles or two four slot battery chargers: 1.
PAGE 296
8-34 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 3. Secure a second slide to the remaining two screw holes on the bracket in the same manner. Pan-head screw holes Insert screws from below Figure 8-28. Attaching Two Shelf Slides Four Slot Cradle To attach the shelf slide to the wall mount bracket for use with a four slot cradle: 1. Place a slide on the left-hand bracket, aligning the larger pan-head screw holes in the slide with the left two screw holes on the bracket. 2.
PAGE 297
Accessories For one single slot cradle/four slot charger, center it on the bracket. Slide grooves on bottom of cradle/charger over bracket slide Figure 8-29. Attaching Two Shelf Slides For two single slot cradle/four slot chargers, slide one onto the left-hand slide, and one onto the righthand slide. Insert set screws Figure 8-1. Attaching Two Shelf Slides For a four slot cradle, slide the cradle on to the slides, across both brackets.
PAGE 298
8-36 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 299
Software Installation on Development PC Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9- 3 Required System Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 SMDK for eVC4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 300
9-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 301
Software Installation on Development PC Introduction To develop applications to run on the mobile computer, one or more of the following is required: • • • Symbol Mobility Developer Kit (SMDK) for Embedded Visual C 4.0 (eVC4) Symbol Mobility Developer Kit (SMDK) for .NET Device Configuration Package (DCP) for MC9000w.
PAGE 302
9-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG SMDK for eVC4 Installation Requirements In order to install the SMDK for eVC4, the following additional components must first be installed on the development PC: • • • • • Microsoft Windows XP or Windows 2000 Microsoft Embedded Visual C++ v4.0 with SP2 Microsoft Windows Mobile 2003 SDK Microsoft ActiveSync version 3.7 or higher Adobe® Acrobat® Reader® 3.0 or higher.
PAGE 303
Software Installation on Development PC SMDK for .NET Installation Requirements In order to install the SMDK for .NET, the following additional components must first be installed on the development PC: • • Remove any SMDK for .NET (Beta 1 or Beta 2) packages prior to installation. Microsoft Visual Studio .NET 2003. SMDK for .NET Contents and Locations The SMDK for .NET contains the components listed in Table 9-2. Table 9-2. SMDK for .
PAGE 304
9-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG DCP for MC9000w Contents and Locations The DCP for MC9000w contains the components listed in Table 9-3. Table 9-3. DCP Contents and Locations Components Directory Location Files that make up the flash partitions Program Files\Symbol Device Configuration Packages\MC9000w\v1.0\Flash Folders File used to create device splash screen \Program Files\Symbol Device Configuration Packages\MC9000w\v1.
PAGE 305
Configuring the Mobile Computer Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 3 Starting Terminal Configuration Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4 Defining Script Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7 Creating the Script for the Hex Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 306
10-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG FFS Partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working with FFS Partitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RegMerge.dll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CopyFiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Non-FFS Partitions . . .
PAGE 307
Configuring the Mobile Computer Introduction Terminal Configuration Manager (TCM) is an application used to customize flash file system partitions for the mobile computer. The most common use is to create an application partition hex file that contains the customer's application. TCM can also be used to load hex files to the flash memory of the mobile computer. The program resident on the mobile computer that receives the hex file and burns it to the flash memory is called Initial Program Loader (IPL).
PAGE 308
10-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Starting Terminal Configuration Manager Click the Windows start menu TCM icon (Symbol Device Configuration Packages, MC9000w v1.0) to start TCM. The TCM window appears displaying two child windows: Script1 and File Explorer. The Script1 window contains a newly created script and the File Explorer window contains a file explorer view used for selecting files to be placed in the script. Figure 10-1.
PAGE 309
Configuring the Mobile Computer The following table lists the components of the TCM window. Table 10-1. TCM Components Icon Component Function Script Window Displays the files to be used in the creation of the partition(s). File Explorer Window Used to select the files to be added to the script. Create button Create a new script file. Open button Open an existing script file. Save button Save the current script file. Large icons button View the current script items as large icon.
PAGE 310
10-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 10-1. TCM Components (Continued) Icon Component Function Properties button View/change the current script properties. Build button Build the current script into a set of hex files. Check button Check the script for errors (files not found). Send button Download the hex image to the terminal. Tile button Arrange the sub-windows in a tiled orientation.
PAGE 311
Configuring the Mobile Computer Defining Script Properties Before a script is created, the script properties must be defined. This defines the type of terminal, flash type, number of disks being created and the memory configuration of each disk partition. To define the script properties: 1. Select the Script window to make it active. 2. Click the Properties button. The Script Properties window - Partition Data tab appears. Figure 10-2. Script Properties Window - Partition Data Tab 3. 4. 5. 6.
PAGE 312
10-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 8. Click the Options tab. The Script Properties window - Options tab appears. Figure 10-3. Script Properties Window - Options Tab 9. Set the paths for the Script File, Flash File and Hex File Build. 10. Click OK.
PAGE 313
Configuring the Mobile Computer Opening a New or Existing Script A script file can be created from scratch or based on an existing script file. Click Create to create a new script or click Open to open an existing script (for example, a script provided in the DCP for MC9000w). If an existing script is opened and changes are made, saving the changes overwrites the original script.
PAGE 314
10-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Building the Image Once the script is created, the hex image defined by the script can be built. As part of the build, TCM performs a check on the script which verifies that all files referenced in the script exist. This check is important for previously created scripts to ensure that files referenced in the script are still in the designated locations. To build scripts: 1. Click Build on the TCM toolbar.
PAGE 315
Configuring the Mobile Computer If one of the partitions being built is the ESSID, a prompt appears requesting the ESSID value. Deselect the HR (High Rate) check box when building ESSID images for a device with an FH radio. Figure 10-6. Build ESSID Partition Window If one of the partitions being built is the Splash Screen, a prompt appears requesting both the source Bitmap file and the destination HEX file. 6. A check is performed and if there are no errors, the partition hex files are created.
PAGE 316
10-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Note The mobile computer must be inserted in the cradle or attached to the CAM, both with their appropriate power supplies connected to a power source, for the mobile computer to reset into IPL. 3. When the Initial Program Loader menu appears, release scan button/trigger and Power button.
PAGE 317
Configuring the Mobile Computer Table 10-2. IPL Menu Partitions (Continued) Partition Name Description Application Contains the files in the Application folder. PRIMFIRM Contains the primary radio firmware for the Spectrum24 HR radio card. Note: These partitions must be loaded to use wireless downloads through IPL with the HR radio. They are only used by IPL and are not required by the Operating System or the S24 FH radios.
PAGE 318
10-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 10-2. IPL Menu Partitions (Continued) Partition Name Auto Select Note Description Selecting this item allows one or more files to be downloaded without having to manually select the destination. (The content of the files being downloaded automatically directs the file to the correct destination.) For technical reasons, Auto Select cannot be used to download Monitor, Power Micro, or Partition Table.
PAGE 319
Configuring the Mobile Computer Note If the mobile computer does not have a radio, then the WirelessS24XX selection is not available on the Transport menu. 6. Use the up and down scroll buttons to select the method of transport, then press Enter. 7. If you selected the Serial transport method, the Baud Rate Menu appears. Baud Rate Menu 115200 57600 38400 19200 9600 Previous Top Figure 10-9. Baud Rate Menu 8. Use the up and down scroll buttons to select the appropriate baud rate, then press Enter.
PAGE 320
10-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 9. If you selected the Wireless S24XX transport method, the Address Configuration menu appears. Address Configuration DHCP Previous Top Figure 10-10. Address Configuration Menu Note For wireless downloads, the ESSID partition must be loaded with the correct ESSID. 10. Use the up and down scroll buttons to select DHCP, then press Enter.
PAGE 321
Configuring the Mobile Computer 11. The Download File? menu appears. Download File? Download Cancel Show Parms Previous Top Figure 10-11.
PAGE 322
10-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 12. Use the up and down scroll buttons to select Show Parms to verify the file to download. Press Enter to display the Parameters screen. Download: "Partition Name" via "Device Parameters" Press Enter to Continue Figure 10-12. Parameters Screen Partition Name is the name of the partition selected in the Initial Program Loader menu.
PAGE 323
Configuring the Mobile Computer 14. Use the up and down scroll buttons to select Download. Press Enter. The Downloading screen appears. Downloading: Partition Name Device Parameters Device Status Figure 10-13. Downloading Screen Before the download starts, if Serial was selected in the Select Transport menu, Waiting for Data appears in the Device Status field. If Wireless S24XX was selected in the Select Transport menu, the IP address appears in the Device Status field. 15.
PAGE 324
10-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 16. For Serial port connections, click the Serial tab and select the Image Files To Load, Comm Port and Baud Rate from their respective drop-down lists. For Wireless connections, click the Ethernet tab. A list of available devices and their IP addresses appear. Only those devices placed into the Wireless transport mode of IPL appear in this dialog. Select the files to download and the device to receive the files.
PAGE 325
Configuring the Mobile Computer TCM Error Messages TCM validates the cells in the partition table when the Execute button is clicked. Cells highlighted in red contain an error. Partition loading is disabled until all errors are corrected. Table 10-3. TCM Error Messages Error Description/Solution Failed to build images: flash file system DLL not loaded! TCM could not load the DLL required to build images for the targeting flash file system. Reinstall TCM or recover the DLL.
PAGE 326
10-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 10-3. TCM Error Messages (Continued) Error Description/Solution One of the disk sizes is one sector In Script Properties window, one of the disks is too small (one sector in size). This may in size cause problem while building images, especially when cushion is enabled. Increase the disk size. INVALID VOLUME NAME In Script Properties window, one of the volume labels is not valid. Corrupt TCM.
PAGE 327
Configuring the Mobile Computer IPL Error Detection While receiving data, IPL performs many checks on the data to ensure that the data is received correctly. If an error is detected, IPL immediately aborts the download, and reports the error on an error screen. Error screens may vary depending on the action being performed.
PAGE 328
10-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 10-4. IPL Errors (Continued) Error Text Error Number Probable Cause Can't open the source -7 An error occurred opening the source device (either radio card or Serial port). Check source device connectivity and retry. Can't open the destination -8 An error occurred opening the destination device (either flash ROM or Power Micro). Retry the download.
PAGE 329
Configuring the Mobile Computer Table 10-4. IPL Errors (Continued) Error Text Error Number Probable Cause Invalid data in HEX file -25 The Symbol HEX file being downloaded contains invalid data. Ensure the file is in proper Symbol HEX file format with valid HEX data. Exceeded max size -26 The download file is too large to fit into the space allocated for it. Either make the file smaller or increase the space allocated for it by altering the partition table.
PAGE 330
10-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Creating a Splash Screen The source bitmap files used to create the default splash screens for the mobile computer are supplied with the DCP for MC9000w. These files can be modified using any of the standard windows image editors, allowing customization for particular customers. To create a custom splash screen, perform the following steps: 1. For mobile computers with monochrome screens, open the Splashmono.
PAGE 331
Configuring the Mobile Computer Flash Storage In addition to the RAM-based storage standard on Windows CE terminals, the mobile computer is also equipped with a non-volatile Flash-based storage area which can store data (partitions) that can not be corrupted by a cold boot. This Flash area is divided into two categories: Flash File System (FFS) Partitions and Non-FFS Partitions. FFS Partitions The mobile computer includes two FFS partitions.
PAGE 332
10-28 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG RegMerge.dll RegMerge.dll is a built-in driver that allows registry edits to be made to the Windows CE Registry. Regmerge.dll runs very early in the boot process and looks for registry files (.reg files) in certain Flash File System folders during a cold boot. It then merges the registry changes into the system registry located in RAM.
PAGE 333
Configuring the Mobile Computer CopyFiles Windows CE expects certain files to be in the Windows folder, residing in volatile storage. Windows CE maintains the System Registry in volatile storage. CopyFiles copies files from one folder to another on a cold boot. Files can be copied from a non-volatile partition (Application or Platform) to the Windows or other volatile partition during a cold boot. During a cold boot CopyFiles looks for files with a .
PAGE 334
10-30 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Note • • 8 bits per pixel only applies to splash screen images. Once Windows CE is running, the color density is 16 bits per pixel. IPL: This program interfaces with the host computer and allows downloading via cradle or serial cable any or all of the partitions listed above, as well as updated versions of IPL.
PAGE 335
Configuring the Mobile Computer Partition images for selected partitions can be created by TCM. All partition images suitable for use by IPL are in hex file format for transfer by TCM from the development computer to the mobile computer. Upgrade Requirements Upgrade requirements: • • • The hex files to be downloaded (on development computer) A connection from the host computer and the mobile computer (either serial or wireless) TCM (on development computer) to download the files.
PAGE 336
10-32 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 337
Maintenance & Troubleshooting Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K- 3 Maintaining the Mobile Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-4 Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 338
11-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 339
Maintenance & Troubleshooting Introduction This chapter includes instructions on cleaning and storing the mobile computer, and provides troubleshooting solutions for potential problems during mobile computer operating. Maintaining the Mobile Computer For trouble-free service, observe the following tips when using the mobile computer: • • • • • • Take care not to scratch the screen of the mobile computer.
PAGE 340
11-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Troubleshooting Mobile Computer Table 11-1. Troubleshooting the Mobile Computer Problem Mobile computer does not turn on. Cause Solution Lithium-ion battery not charged. Charge or replace the lithium-ion battery in the mobile computer. Lithium-ion battery not installed properly. Ensure battery is installed properly. See Installing and Removing the Main Battery on page 1-6. System crash. Perform a warm boot.
PAGE 341
Maintenance & Troubleshooting Table 11-1. Troubleshooting the Mobile Computer (Continued) Problem Cause Mobile computer turns itself off. Mobile computer is inactive. Tapping the window buttons or icons does not activate the corresponding feature. A message appears stating that the mobile computer memory is full. Solution The mobile computer turns off after a period of inactivity. If the mobile computer is running on battery power, this period can be set from 1 to 5 minutes, in one-minute intervals.
PAGE 342
11-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table 11-1. Troubleshooting the Mobile Computer (Continued) Problem The mobile computer does not accept scan input. Cause Solution Scanning application is not loaded. Verify that the unit is loaded with a scanning application. See the System Administrator. Unreadable bar code. Ensure the symbol is not defaced. Distance between exit window and bar code is incorrect. Ensure mobile computer is within proper scanning range.
PAGE 343
Maintenance & Troubleshooting Four Slot Charge Only Cradle Table 11-2. Troubleshooting the Four Slot Charge Only Cradle Problem Mobile computer charge indicator LED does not light. Cause Solution Cradle is not receiving power. Ensure the power supply is securely connected and receiving power. Mobile computer is not seated correctly in the cradle. Ensure the battery is properly installed in the mobile computer, and re-seat the mobile computer in the cradle.
PAGE 344
11-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Four Slot Ethernet Cradle Table 11-3. Troubleshooting the Four Slot Ethernet Cradle Symptom Cause Solution Attempt by the mobile computer Mobile computer removed from Wait one minute and reinsert the mobile computer in to ActiveSync failed. the cradle while the LED was the cradle. This allows the cradle to attempt another blinking green. synchronization.
PAGE 345
Maintenance & Troubleshooting Table 11-3. Troubleshooting the Four Slot Ethernet Cradle (Continued) Symptom Cause Solution All Communication Status LEDs The unit could not configure Connect the unit to an Ethernet network with a are flashing red. itself, or it has lost the lease on correctly functioning DHCP server. its IP address. Failed automatic cradle configuration via local DHCP service. Connect a properly configured DHCP server or DHCP relay agent to the subnet, and power cycle the cradle.
PAGE 346
11-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Four Slot Spare Battery Charger Table 11-4. Troubleshooting The Four Slot Spare Battery Charger Symptom Batteries not charging. Possible Cause Action Battery was removed from the Ensure MSR is receiving power. Ensure mobile computer is charger or charger was unplugged attached correctly. Confirm main battery is charging under from AC power too soon. Start - Settings - System - Power.
PAGE 347
Maintenance & Troubleshooting Table 11-5. Troubleshooting the Single Slot Serial/USB Cradle (Continued) Symptom Spare battery is not charging. During data communications, no data was transmitted, or transmitted data was incomplete. Possible Cause Action Battery not fully seated in charging Remove and re-insert the spare battery into the cradle, slot. ensuring it is firmly seated. Battery inserted incorrectly. Ensure the contacts are facing down and toward the back of the cradle. Battery is faulty.
PAGE 348
11-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Cable Adapter Module Table 11-6. Troubleshooting The Cable Adapter Module Symptom Possible Cause Action Mobile computer Mobile computer was removed Ensure CAM is receiving power. Ensure mobile computer battery is not charging. from CAM or CAM was unplugged is attached correctly. Confirm main battery is charging from AC power too soon. under Start - Settings - System - Power.
PAGE 349
Maintenance & Troubleshooting Table 11-7. Troubleshooting the Magnetic Stripe Reader (Continued) Symptom Possible Cause Action Mobile computer Mobile computer was removed Ensure MSR is receiving power. Ensure mobile computer is battery is not charging. from MSR or MSR was unplugged attached correctly. Confirm main battery is charging under from AC power too soon. Start - Settings - System - Power.
PAGE 350
11-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 351
Block Recognizer Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 352
A-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 353
A-3 Introduction Using the Block Recognizer, you can write characters directly on the mobile computer screen with the stylus. These characters are translated into typed text. Use Block Recognizer to enter text, for example, to write a note or to fill in fields in a dialog box. Figure A-2 provides examples of how to write characters in lowercase. The Block Recognizer input panel is divided into two writing areas. Letters written in the left area (labeled abc) create lowercase letters.
PAGE 354
A-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG The following chart illustrates some of the characters you can write (the dot on each character is the starting point for writing). Figure A-2. Character Chart For specific instructions on using Block Recognizer, with Block Recognizer open, tap the question mark next to the writing area.
PAGE 355
Demo Program Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B- 3 SelfTest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5 Notify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6 Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 356
B-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unique Unit ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Persist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery . . . . . . .
PAGE 357
B-3 Introduction If the demo program is not already running on the mobile computer, it can be launched from the Start menu. The demo program files reside in the Application partition on the mobile computer. If this partition was not loaded to the device, it can be obtained from the Symbol Web site and loaded using TCM (see 10, Configuring the Mobile Computer for instructions on using TCM). The following options are available via the demo program.
PAGE 358
B-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG If the demo program is already on the mobile computer, tap Start - 9000 Demo. If the demo program was downloaded into the Application directory on the mobile computer, navigate to the directory using File Explorer and tap the Blt file. The Series 9000 Demo window appears. Figure B-1. Series 9000 Demo Window Tap the Test Apps icon. The Test Applications window appears. Figure B-2.
PAGE 359
B-5 SelfTest SelfTest tests the functionality of the features on the mobile computer. 1. To access the Self Test application, tap the Self Test icon on the Test Applications window. The Self Test window appears. Figure B-3. Self Test Window 2. Select as many check boxes to test as desired. 3. In the Run Tests box, select the One Time radio button to run one test for each checked item or select the Continuously radio button to run tests for each checked item continuously. 4. Tap Settings.
PAGE 360
B-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Notify Notify tests the functionality of the green decode LED, function, shift and control key LEDs (keypad dependent), communication LED (where applicable), and beeper of the mobile computer. 1. To access the Notify application, tap the Notify icon on the Test Applications window. The Notify Example window appears. Figure B-5. Notify Window 2. 3. 4. 5. Select one of the items from the list. Tap the On button.
PAGE 361
B-7 Keyboard Keyboard displays the values of a key on the keypad. 1. To access the Keyboard application, tap the Keyboard icon on the Test Applications window. The KeyCheck Example window appears. Figure B-6. KeyCheck Example Window 2. Press a key on the mobile computer’s keypad. 3. The key’s codes display. 4. Tap X to close the application.
PAGE 362
B-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Display Display is a test of the shades and colors displayed in the touch panel when the mobile computer is in use. On mobile computers with a monochrome display, black, white and shades of gray appear. On mobile computers with a color display, colors appear. 1. To access the Display test application, tap the Display icon on the Test Applications window. The DisplayTest window appears. Figure B-7. DisplayTest Window 2.
PAGE 363
B-9 Memory Memory displays memory usage and allocation on the mobile computer. 1. To access the Memory application, tap the Memory icon on the Test Applications window. The MemTest Example window appears. Figure B-8. MemTest Example Window 2. Tap Alloc to allocate memory. 3. Tap Free to free previously allocated memory. 4. Tap Exit to close the application.
PAGE 364
B-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG MSR 9000 The MSR 9000 application is designed to work with the snap-on MSR. This sample application illustrates how an application should handle MSR inputs. 1. Attach the MSR 9000 to the mobile computer (see Attaching and Removing on page 8-20), with the appropriate power supply. 2. To access the MSR 9000 application, tap the MSR 9000 icon on the Test Applications window. The MSR 9000 Swipe Card window appears. Figure B-9.
PAGE 365
B-11 3. Swipe a magnetic stripe card. The content on the card displays in the window. Figure B-10. MSR 9000 Data Window 4. Tap OK to swipe another card. 5. Tap X to close the application.
PAGE 366
B-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG MSR Cameo The MSR 9000 Cameo application is designed to work with the snap-on MSR. The application is identical to the MSR 9000, however it uses a different driver to support a different type of MSR. This sample application illustrates how an application should handle MSR inputs. 1. Attach the MSR Cameo to the mobile computer (see Attaching and Removing on page 8-20), with the appropriate power supply. 2.
PAGE 367
B-13 3. Swipe a magnetic stripe card. The content on the card displays in the window. Figure B-12. MSR Cameo Data Window 4. Tap OK to swipe another card. 5. Tap X to close the application. Printing Printing tests the functionality of a printer. 1. To access the Printing application, tap the Printing icon on the Test Applications window. The BasicPrint v1.0 window appears. Figure B-13. BasicPrint v1.0 Window 2. 3. 4. 5. 6. Select a printer from the Select a Printer: drop-down list.
PAGE 368
B-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Scan The Visual C/C++ sample scanning application enables the mobile computer’s scanner, allows the user to change scan parameters, and displays scanned data. To access the Scan demo, tap the Scan icon on the Series 9000 Demo window. The ScanSamp2 Example window appears. Figure B-14.
PAGE 369
B-15 Scanning Options The following options are available in the Scan window: • • • • • Scan provides an alternative to the trigger buttons on the mobile computer. View displays the bar code content in a separate window. Params is used to change scanning parameter options, such as: • beep time (length of decode beep) • beeper frequency (tone) • LED-on time (length of time LED remains on upon decode) • Code ID (AIM, Symbol) • Wav File (sound of decode beep).
PAGE 370
B-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Sounds To access the Sounds demo, tap the Sounds icon on the Series 9000 Demo window for a sample audio application. The toolbar on the bottom of the window allows the user to open, play, record and save sample .wav files. Figure B-16. AudioSamp Example Window Table B-1. Audio Sample Toolbar Tap to Open a .wav file. Tap to Play. Tap to Stop. Tap to Record. Tap to Save a recorded .wav file.
PAGE 371
B-17 Table B-1. Audio Sample Toolbar (Continued) Tap to open About AudioSamp. Tap to Exit Audio Sample.
PAGE 372
B-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Images To access the Image demo, tap the Images icon on the Series 9000 Demo window for a sample image editor. The toolbar on the bottom of the window allows the user to open, edit and save sample image files. Figure B-17. ImageViewer Example Window Table B-2. ImageViewer Toolbar Tap an arrow and drag stylus on image to accomplish the following: • Up Arrow expands image from bottom to top or pans up (based upon re-scale or pan mode).
PAGE 373
B-19 Table B-2. ImageViewer Toolbar (Continued) 1 2 3 Tap an icon and use stylus to crop the image as follows: 1. Fits image to screen (maintain original aspect ratio). 2. Locates image to home position (upper left). 3. Re-scales mode enable. Tap to lock aspect ratio enable/disable. Tap to Open a .jpg file. Tap and drag stylus on image as follows: 1. Fine panning mode enable. 2. Coarse panning mode enable. 1 2 Tap to Save an image. Tap to open About ImageViewer. Tap to Exit ImageViewer.
PAGE 374
B-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Ctl Panel To access the Control Panel demo, tap the Ctl Panel icon on the Series 9000 Demo window to access the Control Panel window, where you can specify settings for the mobile computer. Figure B-18. CtlPanel Window About Tap About on the Control Panel to view the version of the Control Panel. Figure B-19.
PAGE 375
B-21 System Versions Tap System Versions to view version information for the applications on the mobile computer. Figure B-20. System Versions Window On the System Versions window: • • • • • Platform indicates the operating system running on the mobile computer (Pocket PC). OS Version specifies the version of the operating system. OEM Name is the OEM name of the mobile computer. OEM Version indicates the build version of the operating system. IPL Version identifies the build version of the system loader.
PAGE 376
B-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Unique Unit ID Tap Unique Unit ID on the Control Panel to view the mobile computer’s unique unit ID (a 16-byte hex number identifier), and the version numbers for RCM (Resource Coordinator Manager) API, Rescoord (Resource Coordinator) DLL, UUID DLL, and Temperature DLL. Figure B-21. Unique Unit ID Window Series 9000 mobile computers do not support the Temperature DLL.
PAGE 377
B-23 Toggle Persist to Yes to retain these changes made after a cold boot. Figure B-22. Persist Not all options support Permanent Persistence. Note Battery Tap Battery on the Control Panel to view the mobile computer’s battery status. Figure B-23.
PAGE 378
B-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Power Settings Select Power Settings on the Control Panel to specify the settings to use for the mobile computer’s devices. Figure B-24. Power Settings Window Tap each device listed to select the appropriate settings, where applicable. Scroll through the device values to select the appropriate value.
PAGE 379
B-25 Date and Time Tap Date and Time on the Control Panel to change the date and time. The Date and Time window appears. Figure B-25. Date and Time Window To change the time, tap the Time: field and up the up and down arrows to change the value. To change the date, tap the down arrow in the Date: field. A calendar box appears. Select the month and then select the day. Figure B-26.
PAGE 380
B-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Touch Calibrate Select Touch Calibrate to re-align the window. Press ESC to exit. Figure B-27. Align Window Printer Settings Select Printer Settings on the Control Panel to specify the settings to use for printing. Figure B-28. Printer Settings Window Tap each item listed to select the appropriate settings, where applicable. Scroll through the device values to select the appropriate value.
PAGE 381
B-27 Communication Settings Select Comm Settings on the Control Panel to specify the settings to use when communicating with other devices. Figure B-29. Communication Settings Window Tap Port to select the appropriate communication settings to be used by ActiveSync. Scroll through the communication settings to select the appropriate value. Display Settings Select Display Settings on the Control Panel to adjust display backlight features. Figure B-30.
PAGE 382
B-28 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG • • Tap Intensity to toggle the backlight intensity between low, medium, high and super. As you change the value, the display provides a sample of each intensity level. Tap Backlight to turn the backlight on and off. Audio Settings Select Audio Settings on the Control Panel to specify the beeper volume and view the version numbers for the Audio and Notify APIs. Figure B-31.
PAGE 383
B-29 Scanner Settings Select Scanner Settings on the Control Panel to specify scanner-related parameters. Figure B-32. Scanner Settings Window • • • • • Selected Scanner displays the value of the selected scanner. Tap Reader Params to view and modify the values of various reader parameters. Tap Interface Params to view and modify the values of the following interface parameters: • Interface Type • Power Settle Time • Enable Settle Time • Low Power Time.
PAGE 384
B-30 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG • Tap Scanner Version to view the version numbers for the API, MDD, PDD, decoder and hardware. Refer to the Windows CE Help File for Symbol Terminals in the SMDK for eVC4 for details on the available parameter options. Symbol Security Tap Symbol Security on the Control Panel to view the security values of the mobile computer’s features. Figure B-33.
PAGE 385
B-31 About Select the About icon on the Series 9000 Demo window to view information about the demo program. Figure B-34.
PAGE 386
B-32 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 387
ImagerSample Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C- 3 Launching ImagerSample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3 Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 388
C-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 389
C-3 Introduction The ImagerSample application (in mobile computers with an integrated imager) provides the user with the ability to capture and display image files. This chapter provides an overview of the ImagerSample program for capturing images with the mobile computer. Launching ImagerSample ImagerSample can be launched from the Application folder on the mobile computer. Open the Application folder and tap ImagerSample to launch the demo program. The ImagerSample window appears.
PAGE 390
C-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table C-1. ImagerSample Window Options (Continued) Option Description Options Aim (see Aim on page C-6). Lamp (see Lamp on page C-6). Focus Near (see Focus Near on page C-6). Help About (see About on page C-7). Display Window This area contains the video image, or a recently captured image.
PAGE 391
C-5 To save an acquired image: 1. Tap ImagerSample - File - Save As. The Save Image file window appears. Figure C-2. ImagerSample - Save As Window 2. 3. 4. 5. 6. Note Enter the name of the image to save in the Name text box. Select the folder in which you want to save the image from the Folder drop-down list. The default type of file to save is .bmp. Select the location in which to save the file from the Location drop-down list. Tap OK to save the image.
PAGE 392
C-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Exit Tap File - Exit to exit the ImagerSample application. Options Use the Options menu to set the Aim, Lamp and Focus Near selections. Aim Tap Options - Aim (laser aim) to create a targeting pattern when aiming the exit window. Figure C-3. Aiming Pattern Lamp Tap Options - Lamp to turn the lamp on during the exposure phase of image acquisition. Focus Near Tap Options - Focus Near to enable a close focal (focus) length.
PAGE 393
C-7 About Tap Help - About. The About window appears. Figure C-4. ImagerSample - About Window The About window provides software and hardware version information for the ImagerSample application on the mobile computer.
PAGE 394
C-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 395
Specifications Contents Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D- 3 Mobile Computer Pin-Outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5 Accessory CAM and MSR Pin-Outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 396
D-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 397
D-3 Environment The following table summarizes the mobile computer’s intended operating environment. Table D-1. Technical Specifications Operating Temperature -4° to 122° F (-20° to +50° C) Storage Temperature -40° to 158° F (-40° to 70° C) Humidity 5% to 95% non-condensing Electrostatic Discharge (ESD) +/-15 kVDC (air); +/- 8 kVDC (contact) Drop to Concrete 6 feet (1.8 meters) at 14° F to 122° F (-10°C to 50°C) 5 feet (1.
PAGE 398
D-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table D-1. Technical Specifications (Continued) 1D Decode Capability Code 39, code 128, code 93, codabar, code 11, discrete 2 of 5, EAN-3, EAN-13, EAN-128, interleaved 2 of 5, TLC39 (telecommunications, UPCA, UPCE and UPC/ EAN supplements.
PAGE 399
D-5 Mobile Computer Pin-Outs 9 17 8 1 Figure D-1. Pin Locations Table D-2. MC9000-G Pin-Outs PIN Number Signal Name Function 1 USB_GND USB 2 USB_D_PLUS USB 3 TXD RS232C 4 RXD RS232C 5 DCD RS232C 6 RTS RS232C 7 DSR RS232C 8 GND Ground, 2.5A max. 9 RI RS232C 10 CRADLE_DET Grounded by cradle when in cradle 11 DTR RS232C 12 Not connected Not connected 13 POWER_IN 12V, 2.5A max 14 CTS RS232C 15 USB_5V_DET USB 16 USB_D_MINUS USB 17 EXT_PWR_OUT 3.
PAGE 400
D-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Accessory CAM and MSR Pin-Outs Figure D-2. CAM and MSR Serial Connector Table D-3.
PAGE 401
Keypad Maps Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E- 3 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-3 43-Key Keypad Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-4 53-Key Keypad Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 402
E-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
PAGE 403
E-3 Introduction This appendix contains the keypad maps for the keypad configurations. Each key is listed in the table with its value, depending on the state of the keypad. Keypads The mobile computer has five interchangeable modular keypads: • • • • • 43-key 53-key 3270 Emulator 5250 Emulator VT Emulator. The modular keypads can be changed in the field as necessary to support specialized applications.
PAGE 404
MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG E-4 43-Key Keypad Configuration The 43-key configuration contains a Power button, application keys, scroll keys and a function key. See Table E-1 for key functions and Table E-2 for the keypad mappings. The mapping functions include: • • 43-key functions 43-key character map. . Figure E-1.
PAGE 405
E-5 Table E-1. 43-Key Keypad Functions Local Function Key Sequence Display Backlight On/Off Keypad Backlight On/Off Contrast + Contrast - Volume + Volume - Table E-2. 43-Key Keypad Mapping Key Default (Numlock) State Alpha State Shift-Alpha State Func State Shift-Func State 1 u U u U * See Table 2-6 on page 2-20 for special function key values.
PAGE 406
E-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-2. 43-Key Keypad Mapping (Continued) Key Default (Numlock) State Alpha State Shift-Alpha State Func State Shift-Func State 2 v V v V 3 w W w W 4 r R r R 5 s S s S * See Table 2-6 on page 2-20 for special function key values.
PAGE 407
E-7 Table E-2. 43-Key Keypad Mapping (Continued) Key Default (Numlock) State Alpha State Shift-Alpha State Func State Shift-Func State 6 t T t T 7 o O o O 8 p P p P 9 q Q q Q * See Table 2-6 on page 2-20 for special function key values.
PAGE 408
E-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-2. 43-Key Keypad Mapping (Continued) Key Default (Numlock) State Alpha State Shift-Alpha State Func State Shift-Func State 0 y Y y Y VK Code (Decimal) ASCII Value (Decimal) 49 49 89 121 160+89 89 89 121 160+89 89 65 97 160+65 97 66 98 160+66 66 66 98 160+66 66 67 99 160+67 67 67 99 160+67 67 F1 a A * * F2 b B b B F3 c C c C * See Table 2-6 on page 2-20 for special function key values.
PAGE 409
E-9 Table E-2. 43-Key Keypad Mapping (Continued) Key Default (Numlock) State Alpha State Shift-Alpha State Func State Shift-Func State VK Code (Decimal) ASCII Value (Decimal) F4 d D 68 100 160+68 68 69 101 160+69 69 70 102 160+70 70 70 102 160+70 70 * * F5 e E * * F6 f F f F * See Table 2-6 on page 2-20 for special function key values.
PAGE 410
E-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-2.
PAGE 411
E-11 Table E-2. 43-Key Keypad Mapping (Continued) Key Default (Numlock) State Alpha State Shift-Alpha State Func State Shift-Func State VK Code (Decimal) ASCII Value (Decimal) F11 k K * * 75 107 160+75 75 106 42 160+106 42 76 108 160+76 76 191 47 160+191 63 77 109 160+77 77 77 109 160+77 77 78 110 160+78 78 78 110 160+78 78 F12 l L / ? * m M m M * n N n N * See Table 2-6 on page 2-20 for special function key values.
PAGE 412
E-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-2. 43-Key Keypad Mapping (Continued) Key Default (Numlock) State Alpha State Shift-Alpha State Func State Space Shift-Func State VK Code (Decimal) ASCII Value (Decimal) 32 32 32 32 160+32 32 8 8 8 8 160+8 8 8 8 UP 38 - DOWN 40 - Space Space BKSP BKSP BKSP BKSP * See Table 2-6 on page 2-20 for special function key values.
PAGE 413
E-13 Table E-2. 43-Key Keypad Mapping (Continued) Default (Numlock) State Key Alpha State Shift-Alpha State Func State Shift-Func State VK Code (Decimal) ASCII Value (Decimal) Right 39 - Left 37 - . 190 46 88 120 160+88 88 88 120 160+88 88 106 42 90 122 160+90 90 90 122 160+90 90 x X x X * z Z z Z * See Table 2-6 on page 2-20 for special function key values.
PAGE 414
E-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 53-Key Keypad Configuration The 53-key configuration contains a Power button, application keys, scroll keys and function keys. See Table E-3 for key functions and Table E-4 for the keypad mappings. The mapping functions include: • • 53-key functions 53-key character map. Figure E-2.
PAGE 415
E-15 Table E-3. 53-Key Keypad Functions Local Function Key Sequence Display Backlight On/Off Keypad Backlight On/Off Contrast + Contrast - Volume + Volume - Table E-4.
PAGE 416
E-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-4.
PAGE 417
E-17 Table E-4. 53-Key Keypad Mapping (Continued) Key Default State Shift State Func State Shift-Func State 0 VK Code (Decimal) ASCII Value (Decimal) 48 48 160+48 40 121 - 160+121 - UP 38 - DOWN 40 - Right 39 - Left 37 - ENTER 13 13 ) F10 F10 * See Table 2-6 on page 2-20 for special function key values.
PAGE 418
E-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-4. 53-Key Keypad Mapping (Continued) Key Default State Shift State Shift-Func State Func State a A , < b B . > c C ‘ “ b D VK Code (Decimal) ASCII Value (Decimal) 65 97 160+65 65 188 44 160+188 60 66 98 66 66 190 46 160+190 60 67 99 160+67 67 222 39 160+222 34 68 100 160+68 68 69 101 160+69 69 219 91 160+219 123 * * e E [ { * See Table 2-6 on page 2-20 for special function key values.
PAGE 419
E-19 Table E-4. 53-Key Keypad Mapping (Continued) Default State Key Shift State Shift-Func State Func State f F ] } g G \ | h H VK Code (Decimal) ASCII Value (Decimal) 70 102 160+70 70 221 93 160+221 125 71 103 160+71 71 220 92 160+220 124 72 104 160+72 72 73 105 160+73 73 74 106 160+74 74 192 96 160+192 126 * * i I * * j J ‘ ~ * See Table 2-6 on page 2-20 for special function key values.
PAGE 420
E-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-4.
PAGE 421
E-21 Table E-4.
PAGE 422
E-22 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-4. 53-Key Keypad Mapping (Continued) Key Default State Shift State Shift-Func State Func State v V / ? w W = + x X VK Code (Decimal) ASCII Value (Decimal) 86 118 160+86 86 191 47 160+191 63 87 119 160+87 87 187 43 160+187 43 88 120 160+88 88 89 121 160+89 89 89 121 160+89 89 * * y Y y Y * See Table 2-6 on page 2-20 for special function key values.
PAGE 423
E-23 Table E-4. 53-Key Keypad Mapping (Continued) Key Default State Shift State Func State Shift-Func State z Z VK Code (Decimal) ASCII Value (Decimal) 90 122 90 90 * * * See Table 2-6 on page 2-20 for special function key values.
PAGE 424
E-24 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 3270 Emulator Configuration The 3270 emulator configuration contains a Power button, application keys, scroll keys and a function key. The 3270 emulator configuration uses the 53-key mapping whe)n not in the emulator mode (see Table E-4 for descriptions for the 53-key mappings. The emulator mapping functions include: • • • 3270 key functions 3270 emulator keys 3270 character map. Figure E-3.
PAGE 425
E-25 Table E-5.
PAGE 426
E-26 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-6.
PAGE 427
E-27 Table E-6. 3270 Emulator Keys (Continued) 3270 Key Key Sequence F4 <4> F5 <5> F6 <6> F7 <7> F8 <8> F9 <9> F10 <0> F11 <1> F12 <2> F13 <3> F14 <4> F15 <5> F16 <6> F17 <7> F18 <8> F19 <9> F20 <0> F21 <1> F22 <2> F23 <3> F24 <4> Table E-7.
PAGE 428
E-28 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-7. 3270 Character Map (Continued) Char Key Sequence ! <5> " # <6> $ <7> % <8> & <9> ' ( <0> ) * <*> + , ~~- . <.~~
~~PAGE 429~~
~~E-29 Table E-7.~~
~~PAGE 430~~
~~E-30 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-7.~~
~~PAGE 431~~
~~E-31 Table E-7.~~
~~PAGE 432~~
E-32 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG 5250 Emulator Configuration The 5250 emulator configuration contains a Power button, application keys, scroll keys and a function key. The 5250 emulator configuration uses the 53-key mapping when not in the emulator mode (see Table E-4 for descriptions for the 53-key mappings). The emulator mapping functions include: • • • 5250 key functions 5250 emulator keys 5250 character map. Figure E-4.
~~PAGE 433~~
~~E-33 Table E-8.~~
~~PAGE 434~~
E-34 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-9. 5250 Emulator Keys 5250 Key Key Sequence Attention Backspace Back Tab Clear <1> Delete Dup Enter Erase Input Field Exit Field Minus <*> Help Home Insert Print Reset <.
~~PAGE 435~~
E-35 Table E-9. 5250 Emulator Keys (Continued) 5250 Key Key Sequence F4 <4> F5 <5> F6 <6> F7 <7> F8 <8> F9 <9> F10 <0> F11 <1> F12 <2> F13 <3> F14 <4> F15 <5> F16 <6> F17 <7> F18 <8> F19 <9> F20 <0> F21 <1> F22 <2> F23 <3> F24 <4> Table E-10.
~~PAGE 436~~
E-36 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-10. 5250 Character Map (Continued) Char Key Sequence ! <5> " # <6> $ <7> % <8> & <9> ' ( <0> ) * <*> + , ~~- . <.~~
~~~~PAGE 437~~~~
~~~~E-37 Table E-10.~~~~
~~~~PAGE 438~~~~
~~~~E-38 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-10.~~~~
~~~~PAGE 439~~~~
~~~~E-39 Table E-10.~~~~
~~~~PAGE 440~~~~
E-40 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG VT Emulator Configuration The VT emulator configuration contains a Power button, application keys, scroll keys and a function key. The VT emulator configuration uses the 53-key mapping when not in the emulator mode (see Table E-4 for descriptions for the 53-key mappings). The emulator mapping functions include: • • • • VT key functions VT-100 emulator keys VT-220 emulator keys VT/HP character map. Figure E-5.
~~~~PAGE 441~~~~
~~~~E-41 Table E-11.~~~~
~~~~PAGE 442~~~~
E-42 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-12. VT-100 Emulator Keys VT-100 Key Key Sequence Return Backspace Tab <*> Up Arrow Left Arrow ESC BS LF Hard Mobile Computer Reset Enter Backspace(Delete) Backtab <.> Down Arrow Right Arrow PF1 <1> PF2 <2> PF3 <3> PF4 <4> Table E-13.
~~~~PAGE 443~~~~
~~~~E-43 Table E-13.~~~~
~~~~PAGE 444~~~~
E-44 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-13. VT-220 Emulator Keys (Continued) VT-220 Key Key Sequence Backspace(Delete) Backtab <.> Down Arrow Right Arrow Soft Mobile Computer Reset ~~Select <5> Remove <7> Next Screen <6> Table E-14.~~
~~~~PAGE 445~~~~
~~~~E-45 Table E-14.~~~~
~~~~PAGE 446~~~~
~~~~E-46 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-14. VT/HP Character Map (Continued) Char Key Sequence ) * <*> + , ~~- . <.~~~~~~
~~PAGE 447~~
~~E-47 Table E-14.~~
~~PAGE 448~~
~~E-48 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Table E-14.~~
~~PAGE 449~~
~~E-49 Table E-14.~~
~~PAGE 450~~
~~E-50 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG~~
~~PAGE 451~~
Glossary 802.11/802.11b A radio protocol that may be used by the Symbol Spectrum24 radio card. Symbol radio cards that use the 802.11 protocol also have an ESS_ID. ACK/NAK ACK/NAK is the default software handshaking.
~~PAGE 452~~
GL-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Access Point Access Point (AP) refers to Symbol’s Spectrum24 Ethernet Access Point. It is a piece of communications equipment that manages communications between the host computer system and one or more wireless terminals. An AP connects to a wired Ethernet LAN and acts as a bridge between the Ethernet wired network and IEEE 802.11 interoperable radio-equipped mobile units, such as a mobile computer.
~~PAGE 453~~
Glossary Aperture The opening in an optical system defined by a lens or baffle that establishes the field of view. Application Programming Interface See API. ANSI Terminal A display terminal that follows commands in the ANSI standard terminal language. For example, it uses escape sequences to control the cursor, clear the screen and set colors. Communications programs support the ANSI terminal mode and often default to this terminal emulation for dial-up connections to online services.
~~PAGE 454~~
GL-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG BIOS Basic Input Output System. A collection of ROM-based code with a standard API used to interface with standard PC hardware. Bit Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. Bits per Second (bps) Bits transmitted or received. Bit Binary digit.
~~PAGE 455~~
Glossary CDRH Class 2 No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses no danger for unintentional direct human exposure. Cellular Digital Packet Data See CDPD. Character A pattern of bars and spaces which either directly represents data or indicates a control function, such as a number, letter, punctuation mark, or communications control contained in a message.
~~PAGE 456~~
GL-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Continuous Code A bar code or symbol in which all spaces within the symbol are parts of characters. There are no intercharacter gaps in a continuous code. The absence of gaps allows for greater information density. Cradle A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a storage place for the terminal when not in use.
~~PAGE 457~~
Glossary DHCP Server A server in the network or a service within a server that assigns IP addresses. Discrete Code A bar code or symbol in which the spaces between characters (intercharacter gaps) are not part of the code. Discrete 2 of 5 A binary bar code symbology representing each character by a group of five bars, two of which are wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant.
~~PAGE 458~~
GL-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG ESS_ID Extended Service Set Identifier, defines the coverage area. Prior to the release of the 802.11 specification the ESS_ID was called the Net_ID or Network Identifier. For terminals using Spectrum24 radios with the 802.11 protocol, an ESS_ID allows facilities to limit which Access Points a mobile computer can communicate with. It is set on the Network tab of the Control Panel.
~~PAGE 459~~
Glossary Hard Reset See Cold Boot. Hopping Sequence A set of random frequencies designed to minimize interference with other sets of random frequencies. A hopping sequence determines the pattern with which a station that uses frequency hopping changes its communications frequency. See Frequency Hopping. Hz Hertz; A unit of frequency equal to one cycle per second.
~~PAGE 460~~
GL-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Intercharacter Gap The space between two adjacent bar code characters in a discrete code. Interleaved Bar Code A bar code in which characters are paired together, using bars to represent the first character and the intervening spaces to represent the second. Interleaved 2 of 5 A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces.
~~PAGE 461~~
Glossary Kerberos Kerberos is a network authentication protocol. It is designed to provide strong authentication for client/server applications by using secret-key cryptography. A free implementation of this protocol is available from the Massachusetts Institute of Technology. Kerberos is available in many commercial products as well. Key A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and Decrypting. LAN Local area network.
~~PAGE 462~~
GL-12 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG MC Mobile Computer. MIL 1 mil = 1 thousandth of an inch. Misread (Misdecode) A condition which occurs when the data output of a reader or interface controller does not agree with the data encoded within a bar code symbol. Mobile Computer In this text, mobile computer refers to the Symbol Series 9000 wireless portable computer.
~~PAGE 463~~
Glossary Open Data-Link Interface (ODI) Novell’s driver specification for an interface between network hardware and higher-level protocols. It supports multiple protocols on a single NIC (Network Interface Controller). It is capable of understanding and translating any network information or request sent by any other ODIcompatible protocol into something a NetWare client can understand and process. Open System Authentication Open System authentication is a null authentication algorithm.
~~PAGE 464~~
GL-14 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Programming Mode The state in which a scanner is configured for parameter values. See Scanning Mode. Quiet Zone A clear space, containing no dark marks, which precedes the start character of a bar code symbol and follows the stop character. QWERTY A standard keyboard commonly used on North American and some European PC keyboards. “QWERTY” refers to the arrangement of keys on the left side of the third row of keys.
~~PAGE 465~~
Glossary Scanning Mode The scanner is energized, programmed and ready to read a bar code. Scanning Sequence A method of programming or configuring parameters for a bar code reading system by scanning bar code menus. SDK Software Development Kit Self-Checking Code A symbology that uses a checking algorithm to detect encoding errors within the characters of a bar code symbol. Shared Key Shared Key authentication is an algorithm where both the AP and the MU share an authentication key.
~~PAGE 466~~
GL-16 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG STEP Symbol Terminal Enabler Program. Subnet A subset of nodes on a network that are serviced by the same router. See Router. Subnet Mask A 32-bit number used to separate the network and host sections of an IP address. A custom subnet mask subdivides an IP network into smaller subsections. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets.
~~PAGE 467~~
Glossary TCP/IP (Transmission Control Protocol/Internet Protocol) A communications protocol used to internetwork dissimilar systems. This standard is the protocol of the Internet and has become the global standard for communications. TCP provides transport functions, which ensures that the total amount of bytes sent is received correctly at the other end. UDP is an alternate transport that does not guarantee delivery.
~~PAGE 468~~
GL-18 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Trivial File Transfer Protocol See TFTP. TSR See Terminate and Stay Resident. UPC Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States. UDP User Datagram Protocol.
~~PAGE 469~~
Glossary WNMP (Wireless Network Management Protocol) This is Symbol’s proprietary MAC layer protocol used for inter access point communication and other MAC layer communication. WNMS (was renamed to AirBEAM® Manager) See AirBEAM® Manager.
~~PAGE 470~~
~~GL-20 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG~~
~~PAGE 471~~
Index Numerics 128-bit shared key . . . . . . . . . . . . . . . . . . 4-22, 5-7, 5-8 1-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46 2-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46 3270 emulator keypad . . . . . . . . . . . . . . . . . . . . . . 2-11 40-bit shared key . . . . . . . . . . . . . . . . . . . 4-22, 5-7, 5-8 42-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 5250 emulator keypad . . . . . . . . . . . . . . . . .
~~PAGE 472~~
IN-2 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG power connection . . . . . . . 8-21, 8-26, 8-29 serial connection . . . .8-20, 8-22, 8-24, 8-27 multi media card . . . . . . . . . . . . . . . . . . . . 1-5, 8-3 printer cable . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-4 serial cradle . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-3 shelf slide . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-3 single slot serial/USB cradle . . . . . . . . . . . . . .
~~PAGE 473~~
Index C Cable Adapter Module . . . . . . . . . . . . . . . . . . . 1-5, 8-4 cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-4 auto charge cable . . . . . . . . . . . . . . . . . . 1-5, 8-4 DEX cable . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-4 printer cable . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-4 USB charger . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-4 calendar application . . . . . . . . . . . . . . . . . . . . . . . . .
~~PAGE 474~~
IN-4 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6, 10-3, 10-9, 10-26, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-28, 10-29 default gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9 demo program about . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-31 control panel . . . . . . . . . . . . . . . . . . . . . . . . . B-22 about . . . . . . . . . . . . . . . . . . . . . . . .
~~PAGE 475~~
Index copyfile . . . . . . . . . . . . . . . . . . . . . . . . 10-29 regmerge . . . . . . . . . . . . . . . . . . . . . . . 10-28 flash storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-27 four slot charge only . . . . . . . . . . . . . . . . . . . . . 1-5, 8-3 four slot charge only cradle . . . . . . . . . . . . . . . . . . 8-15 four slot Ethernet cradle . . . . . . . . . . . . . . . . . . . . . 8-12 four slot Ethernet/USB . . . . . . . . . . . . . . . . . . . 1-5, 8-3 G gateway . . .
~~PAGE 476~~
IN-6 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-31 memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40 program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40 storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40 menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14 Microsoft Reader . . . . . . . . . . . . . . . . . . . . . .
~~PAGE 477~~
Index programs flash file system . . . . . . . . . . . . . . . . . . . . . . 10-27 removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50 running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-42 selecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32 stop running programs . . . . . . . . . . . . . . . . . . 3-42 Q quick release holster . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 R radio signal transmission strength . . . . . . . . . . . . . .
~~PAGE 478~~
IN-8 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 about . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7, 3-26 adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 backlight . . . . . . . . . . . . . . . . . . . . . . . . . 3-7, 3-29 beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9 bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
~~PAGE 479~~
Index universal battery charger . . . . . . . . . . . . . . . . . . . . 8-28 unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 USB charger . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 8-4 using headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 using stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 V versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14 volume . . . . . . . . . . . . . . .
~~PAGE 480~~
~~IN-10 MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG~~
~~PAGE 481~~
Tell Us What You Think... We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 738-3318, or mail to: Symbol Technologies, Inc. One Symbol Plaza M/S B-4 Holtsville, NY 11742-1300 Attention: Technical Publications Manager IMPORTANT: If you need product support, please call the appropriate customer support number provided. Unfortunately, we cannot provide customer support at the fax number above.
~~PAGE 482~~
~~PAGE 483~~
~~PAGE 484~~
~~Symbol Technologies, Inc. One Symbol Plaza Holtsville, New York 11742-1300 http://www.symbol.~~