User's Guide

Wireless Applications 4-13
When a user enters the credentials, the credentials are applied to a particular profile. If a user logs out, all of the cached credentials
are cleared. If a profile is edited, then all cached credentials for that profile are cleared.
The following authentication types have credential caching:
•EAP TLS
• PEAP
•LEAP
• TTLS.
If the At Time check box is selected the TIme Cache Options dialog box displays.
Figure 4-14. Time Cache Options Dialog Box
1. Tap the Interval radio button to check credentials at a set time interval.
2. Enter the value in minutes, in the Min box.
3. Tap Next to continue.
4. Tap the At (hh:mm) radio button to check credentials at a set time.
5. Tap Next. The At Time dialog box appears.
On Resume
If the On Resume option is selected, an authenticated user is reauthenticated when a suspend/resume occurs. Once the user
is reauthenticated, the user is prompted for credentials. If the user does not enter the same credentials that were entered
prior to the suspend/resume, the user is disconnected from the network. The user may try up to three times to enter the
correct credentials. If the correct credentials are entered, then the network connection remains intact. This option only
applies if a user is logged in.
At Time
Use this option to perform a local verification on an authenticated user at a specified time. The time can be an absolute time
or a relative time from the authentication, the times should be at least 5 minutes intervals. Once the time has passed, the
user is prompted for credentials. If the user enters the correct credentials, the network connection remains intact. If the user
enters the wrong credentials, the user is disconnected from the network. The user may try up to three times to enter the
correct credentials. If the correct credentials are enter, then the network connection remains intact. This option only applies
if a user is logged in.
Table 4-9. Cache Options (Continued)
Description