User's Guide

MC909X Integrator Guide4-14
Figure 4-15. At Time Dialog Box
6. Enter the time using the 24 hour clock format in the (hh:mm) box.
7. Tap > to move the time to the right. Repeat for additional time periods.
8. Tap Next. The User Name dialog box displays.
The user name and password can be entered (but is not required) when the profile is created. When a profile authenticates with
credentials that were entered in the profile, caching rules do not apply. Caching rules only apply on credentials that are entered
through the login dialog box.
Figure 4-16. Username Dialog Box
Password
Use the Password dialog box to enter a password. If EAP/TLS is the selected authentication type, the password is not required and
the field is disabled.
Figure 4-17. Password Dialog Box
1. Enter a password in the Password field.
2. Select the Advanced ID check box, if advanced identification is required.
3. Tap Next, the Encryption dialog box displays. See Encryption on page 4-15 for setting the encryption information.
Advanced Identity
Use the Advanced ID dialog box to enter the 802.1X identity. The 802.1X identity value can be 63 characters long and is a case
sensitive identity supplied to the authenticator. In TTLS and PEAP, it is recommended that this field not contain a true identity, but
instead the identity anonymous, plus any desired realm (e.g. anonymous@myrealm). A user ID is required before proceeding.