User manual

Configuring the AP
AP-4131 Access Point Product Reference Guide 79
3. Verify the values set to reflect the network environment.
Change them as needed.
4. Select OK or Save to register settings by writing changes to NVM.
Selecting
Save displays a confirmation prompt.
5. Select Save ALL APs or press [F2] to save the RF Configuration
information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP, sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
6. The system prompts Warning Update, save, and reset all APs in the Known AP Menu?
yes no
Ty pe Y.
7. Select Cancel-[ESC] to disregard any changes made to this screen and
return to the previous menu.