PDA User Manual

10-10
PPT 2700 Series Product Reference Guide
Sending the Hex Image
Once the hex file is built, you are ready to download it to the terminal. A Hex image
download requires both TCM and a program loader stored on the terminal. The terminal
comes with a program loading utility, Initial Program Loader (IPL), stored in the terminal’s
write-protected flash. To run IPL, the terminal must be inserted in a cradle or connected to a
host PC by direct serial connection.
Saving the Script
If you made changes to the script since last saving it, save the script again.
Connect The Terminal and Development PC
To send the hex file to the terminal, first link the terminal and development PC by one of the
following devices:
Direct serial link
Cradle (refer to Chapter 1, Getting Started for more information on setting up the
cradle).
Begin the Send in TCM
In TCM on the PC:
1. Select the script.
2. From the file menu, choose Load Terminal.
OR
On the toolbar, choose . The Load Terminal screen displays.