PDA User Manual

10-14
PPT 2700 Series Product Reference Guide
downloaded is received from the host. While this screen is displayed, pressing the
Action button returns IPL to the Main Menu screen.
8. Insert the terminal in a cradle, or connect it to a host PC with a serial cable.
9. Return to the host PC, and press the OK button on the Load Terminal dialog box.
10. As soon as the first character of data is received, IPL displays the receiving screen:
Note:
If the Pre-erase Attribute bit is set on the partition being downloaded,
the message “Pre-Erasing Flash” also appears.
This screen indicates that the area selected in the Main Menu screen is currently
downloading, and displays until an entire image is received, or until an error is
detected. As more data is received, the Receiving Screen is updated to reflect the
current status.
To process the data, IPL must receive, erase, and write the entire image. With the
exception of the disk images, IPL receives the entire image before starting the erase,
and completes the erase before starting to write. With disk images, IPL multiplexes
all three operations as data is received.
11. When the entire image is received, IPL indicates that the download is complete.
If Auto Select was selected on the Main Menu, the text “Auto Select Enabled”
appears in place of “Cold Boot Exits IPL.”
IPL VER X.XX
Partition Name
Downloading Data
Processing XXXXX KB
of YYYYY KB image
IPL VER X.XX
Partition Name
Download Complete
Press Action to
return to Main Menu
Cold Boot Exits IPL