PDA User Manual

10-19
Configuring the Terminal
2. To change the bitmap properties, double-click on the bottom-right corner of the
bitmap when the cursor appears as a double arrow. The Bitmap Properties dialog
box displays.
3. Select Width (<240), Height (<320) and Colors (4).
4. Select 4 colors so that 2 bits are used for each pixel of data in the bitmap file.
5. Select a new file name.
6. Select Image from the toolbar. Select Flip Vertical to invert the image.
If other tools are used, be sure to create the bitmap with the size less than or equal to 16K
and with 4 colors.
Loading the Splash Screen via TCM
To load the bitmap:
1. Click TCMMain.exe in the TCM directory.
2. Connect the PPT 2700 to the PC and invoke IPL to prepare the terminal to receive
the splash screen download.
3. In the partition table, double-click on the Source column entry box for Splash Screen.
The Specify Source dialog box appears. Select the bitmap file.
4. Double-click on the Destination column entry box for Splash Screen.
5. Select Create Image in the Hex Image file dialog box.
6. After the image is created, select Load.
7. Close TCM.