PDA User Manual

1-4
PPT 2700 Series Product Reference Guide
Installing Batteries
Before using your PPT 2700, install a lithium-ion battery. The battery fits behind the battery
door on the back of the PPT 2700.
To install the battery in your PPT 2700:
1. Open the latches on the battery cover and lift the battery cover away from the PPT
2700.
Figure 1-2. Removing the Battery Cover
2. Insert the lithium-ion battery in the battery compartment with the battery tether
positioned properly (as shown below), making sure the battery snaps into place.
Figure 1-3. Inserting the Battery
3. Replace the battery cover and press down firmly on the cover while re-securing the
latches.
Latch
Latch
Te t h e r