PDA User Manual

1-7
Getting Started
Note:
If the battery in the terminal is low, the Terminal Charge LED may
flicker or turn yellow during an ActiveSync operation. The LED
returns to red when the operation is complete.
Charging Spare Batteries
To charge a spare battery, insert the battery in the spare battery charging slot in the back of
the cradle, oriented so the contacts are facing down and towards the back of the cradle. Press
the battery down into the slot until firmly seated.
The Spare Battery Charge LED turns red to indicate charging, then green when the battery is
fully charged. The battery is fully charged after approximately 2 1/2 hours.
Figure 1-7. Charging the Spare Battery
Spare Battery
Charge LED