PDA User Manual

7-3
Connections
3. Tap New connection.
Figure 7-1. Creating a Modem Connection
4. Enter a name for the connection.
5. In the Select a modem list, select Hayes Compatible on COM1.
6. You should not need to change any settings in Advanced. Most ISPs now use a server-
assigned address. If the ISP you are connecting to does not use a server-assigned
address, tap Advanced, then the TCP/IP tab and enter the address. When finished,
tap OK, then Next.
7. Enter the access phone number and tap Next.
8. Select other desired options, and tap Finish.
9. On the Dialing tab, specify your current location and phone type (most phone lines
are tone). These settings apply to all connections you create. Tap OK to return to
Settings.
After you create the connection, it appears in , Programs, Connections. To start the
connection, remove your terminal from the cradle, tap the connection icon, enter your user
name and password, and tap Connect. Once connected, you can: