PDA User Manual

7-5
Connections
3. Tap New connection.
Figure 7-2. Creating a Modem Connection
4. Enter a name for the connection.
5. Select Hayes Compatible on COM1.
6. You should not need to change any settings in Advanced. Most servers use a server-
assigned address. If not, tap Advanced, then the TCP/IP tab and enter the address.
When finished, tap OK, then Next.
7. Enter the access phone number, and tap Next.
8. Select other desired options, and tap Finish.
9. On the Dialing tab, specify your current location and phone type (most phone lines
are tone). These settings apply to all connections you create. Tap OK to return to
Settings.
When you have created the connection, it appears in , Programs, Connections. To start
the connection, remove your terminal from the cradle, tap the connection icon, enter your
user name, domain, and password, and tap Connect. Once connected, you can:
Send and receive e-mail messages using Inbox. Before you can use Inbox, provide the
information it needs to communicate with the e-mail server. See Connecting Directly
to an E-mail Server on page 7-6.