PDA User Manual

8-3
Spectrum24 Network Configuration
Configuring the PPT 2740/2742 (1 and 2 MBit radio)
Using NICTT on the PPT 2740/2742
The NICTT property pages contain a variety of wireless network and service quality
information. Select help for a detailed explanation within each NICTT property page.
General Property Page
Before the PPT 2740/2742 can be used, it must be properly configured with the correct ESS
ID. The ESS ID identifies the radio network and is used to differentiate between different
radio networks. All PPT 2740/2742 terminals on the same network must be set up with the
same ESS ID Code. The ESS ID on the terminal is the same as that of the access points in your
facility.
The General page displays driver firmware and revision information, and allows you to
change the ESSID or NetId depending on the NIC 802.11 or Spring firmware.
Figure 8-1. General Properties Page