User Manual
Table Of Contents
- About This Guide
- Introduction
- Getting Started
- Installation and Communication
- Administrator Console
- Maintenance and Troubleshooting
- Specifications
Maintenance and Troubleshooting 4-5
Enable FTP Server Select whether to enable the FTP server on the reader. Checked (enabled) / unchecked (disabled)
IP Address If manually assigning an IP address to the reader, check with the
system administrator to ensure the IP address is valid in the network.
IP address to assign to the reader
Subnet Mask A mask used to determine to what subnet an IP address belongs. IP address dynamically assigned or user-
entered
Default Gateway The reader uses this IP address to access another network. Depends on network configuration
DNS Server The reader uses the Domain Name System (DNS) IP address to
translate domain names.
Depends on network configuration
TCP Port The port used for TCP/IP communication. User-entered
Default: 3000
HTTP Port The port used for communication over HTTP. User-entered
Default: 80
Table 4-1. Communication Configuration Options (Continued)
Setting Description Possible Values