User Guide

Under“Normal Mode”,the data of the code you scanned will be transferred
to your device via bluetooth,2.4G or USB.A short and low beep show the data
is transferred successfully.If not,the scanner will beep 3 times shortly and lowly.
Under“Normal Mode”,if scans failure,the data you just scanned will lost.
Under“Storage Mode”,the data of the code you just scanned will be stored
in the scanner.And scanner beep once shortly and slowly after each scanning.
Scanner will beep 3 times after scanning a code if its storage space is full.
You can check the storage data amount by scanning following setting code
Working Modes
Storage Data Amount
Storage Mode
Normal Mode
BT 2.4G Wireless Barcode Scanner