User Guide

2.4G Wireless COM-Port Mode Setting
Step1：Scanning setting code“COM-Port Mode”
Step2：Scanning setting code“Enter Pairing Mode”
Step3：
Insert the 2.4G wireless receiver into USB port in your
device.One beep show that scanner and receiver connected.And
it will generate a COM port in your device.
Enable
Disable
COM-Port Mode
Enter Pairing Mode
Notes：When the scanner is entered 2.4G COM-Port Mode pairing
status and it does not get connected with your device within 1 minutes,it
will beep twice lowlyand longly.You need to repeat above-mentioned 3
steps to make it connectwith you device.(When the scanner is in the
2.4G COM-Port pairing status,double-click can make it exit the
pairing mode).
Enable/Disable HID Searching by Pressing
Scan Button 8S Settings
BT 2.4G Wireless Barcode Scanner