2.
2.4G Wireless Barcode Scanner Notices 1. Please read the user manual carefully before using this product. 2. The working voltage of this barcode scanner is 3.3V, charging voltage 5V. Please use our original USB cable to ensure the scanner work properly. 3. Copyright and Patent Right Our company has applied for patent rights, copyrights and software copyrights for this product and its accessories(including hardware, setting software, documentations,appearance,etc. ) 4.
2.4G Wireless Barcode Scanner Contents 1.Notices..................................................................................................................1 2.Introduction&Features.........................................................................................3 3.Application&Parameters......................................................................................4 4.Working Environment&Related Regulations..................................................... 5 5.Installation of Cable.
2.4G Wireless Barcode Scanner Introduction The series of barcode scanner produced by our company feature as strong light source,enhanced long-distance scanning technology. It can read the damaged,stained and poor printed barcode fast under different ambient light conditions. It is durable in use, since it is protected by the industrial safty technique.High volume buzzer is another hint of success scanning besides LED light in the noisy industrial environment.
2.4G Wireless Barcode Scanner Application * Applicable to Business (electrical, book, clothing, medicine, cosmetics, etc.), retail industry, postal service, telecommunications industry,warehousing, logistics industry, public security system, customs systems,banking system, medical system. * Compatible with Microsoft, Android, Linux and other operating systems and bluetooth protocol * Support multi-national keyboard language Parameters Wireless protocol: 2.
2.4G Wireless Barcode Scanner Working Environment Working Temperature: 32°F to 104°F/0°C to 40°C Storage Temperature: -40°F to 140°F/-40°C to 60°C Humidity: 5% to 95% relative humidity (no condensation) Ruggedness: Resist about 6 times drops from 1.5m to concrete ground Ambient Light Immunity: Under normal office and factory ambient lighting conditions, or exposed to the sun won’t take any effect to it.
2.4G Wireless Barcode Scanner Installation of Cable USB Cable Installation sample graph Each barcode scanner is with one USB cable.,For connection, please refer to above sample diagram. Noted: Computer host can charge scanner via USB cable and USB cable can also be used as a wire to transmit barcodes. The installation method is as follows: 1.Connect USB cable’s Square Side interface to the bottom of the scanner; 2.Connect the other side of USB to the computer host. 3.
2.
2.4G Wireless Barcode Scanner 2.4G Wireless Pairing Method: 1st:Scanning following setting code 2nd:Scanning following setting code 3rd:Insert the 2.4G wireless receiver into USB port in your device. One beep show that scanner and receiver connected. Notes:When the scanner is entered 2.4G pairing status and it does not get connected with your device within 1 minutes,it will beep twice lowly and longly.You need to repeat above-mentioned 3 steps to make it connect with you device.
2.
2.
2.
2.
2.4G Wireless Barcode Scanner Transmission Speed Setting Choosing the transmission speed according to the receiving speed of the device Fast Middle Slow Working Modes Super Slow Under“Normal Mode”,the data of the code you scanned will be transferred to your device via bluetooth,2.4G or USB.A short and low beep show the data is transferred successfully.If not,the scanner will beep 3 times shortly and lowly. Under“Normal Mode”,if scans failure,the data you just scanned will lost.
2.4G Wireless Barcode Scanner Scanner will beep 3 times after scanning a code if its storage space is full. Storage Mode You can check the storage data amount by scanning following setting code Storage Data Amount Scanning following setting code to upload the data you have scanned to your device via bluetooth,2.4G wireless or USB. Notes:Making sure that scanner is got connected with your device.
2.4G Wireless Barcode Scanner Hide Pre-characters/Post-characters 1st:Scanning following setting code“Hide Pre-characters”or“Hide Post-characters” Hide Pre-characters Hide Post-characters 2nd:Choosing how many characters you need to hide.
2.
2.4G Wireless Barcode Scanner Add Time As Prefix or Suffix A.Scanning setting code“Add Time as Prefix”,then there is scanning time in front of barcode data. Add Time as Prefix B.Scanning setting code“Add Time as Suffix”,then there is scanning time behind barcode data. Add Time as Suffix C.If you do not need scanning time as prefix or suffix,you can scan following setting code“Cancel Setting”.
2.4G Wireless Barcode Scanner Update Time 1st:Making scanner and computer connected via USB cable,and turnning on the scanner. 2nd:Finding“Update_Time_V1.1.exe”program in the computer and open it.As following picture show. 3rd:Click“Update Time” Notes:“Update_time_V1.1.exe”program can be downloaded in website:https://share.weiyun.com/508OXFZ,or scanning following QR-code.
2.4G Wireless Barcode Scanner Prefix/Suffix Setting The setting prefix and suffix is divided into two parts,displayable characters and controlled characters 1st Part:Displayable characters Step1:Scanning following setting code“Add Prefix”or“Add Suffix” Add Prefix Add Suffix Step2 :Finding the character which you need to add as prefix or suffix in appendix B,and scanning the barcode corresponding to the character.
2.4G Wireless Barcode Scanner Character Set 2 Character Set 3 Step2:Scanning following setting code“Add Prefix”or“Add Suffix” Add Prefix Add Suffix Step3:Finding the character which you need to add as prefix or suffix in appendix A,and scanning the barcode corresponding to the character.
2.4G Wireless Barcode Scanner 2.4G Wireless COM-Port Mode Setting Step1:Scanning setting code“COM-Port Mode” COM-Port Mode Step2:Scanning setting code“Enter Pairing Mode” Enter Pairing Mode Step3:Insert the 2.4G wireless receiver into USB port in your device.One beep show that scanner and receiver connected.And it will generate a COM port in your device. Notes:When the scanner is entered 2.
2.
2.
2.4G Wireless Barcode Scanner Character Set 0 Character Set 1 Character Set 2 Character Set 3 Decimal ASCII 28 FS ALT+028 F7 Ctrl+\ Alt+028 29 GS ALT+029 F8 Ctrl+] Alt+029 30 RS NULL F9 Ctrl+^ Alt+030 31 US NULL F10 Ctrl+_ Alt+031 Setting Code
2.4G Wireless Barcode Scanner AppendixB:Displayable Characters Decimal ASCII 32 Setting Code Decimal ASCII 空格 45 - 33 ! 46 .
2.
2.4G Wireless Barcode Scanner Decimal ASCII 86 Setting Code Decimal ASCII V 100 d 87 W 101 e 88 X 102 f 89 Y 103 g 90 Z 104 h 91 [ 105 i 92 \ 106 j 93 ] 107 k 94 ^ 108 l 95 _ 109 m 96 ` 110 n 97 a 111 o 98 b 112 p 99 c 113 q Setting Code
2.
2.4G Wireless Barcode Scanner FAQ(Frequently Asked Questions) What should I do if the scanner can not pair with my bluetooth device? A.Making sure the scanner is in the pairing state under the required Bluetooth protocol B.If the devices has connected successfully with other barcode scanner via bluetooth,or other devices.Please delete the bluetooth connection record before connecting C.The wireless module has been damaged Why can not the scanner read some codes? A.
2.
LED Light Introduction LED Light Proformance 2.
Battery Display