User's Manual

SYMEO Local Positioning Radar System

LPR-1DXi

Product Documentation

Hardware

Page 12 of 33

The antenna C has to be mounted in correct polarization (C2) as

shown in Figure 3

3.2 Cable glands, interfaces and LED display of the LPR-1DXi

station

The casing B has two cable glands for power cable (B6) and cable for the connection to the

on-board relays (B5). Additionally the pressure equalization membran (B7) is shown.

Figure 4: Casing B side view with cable glands and mounting bracket A

B5 Cable gland for cable to relays

B6 Cable gland for power cable with optional wires for serial RS232

B7 pressure equalization membrane

Pressure equalization membran (B7) must not be removed or

loosened. Otherwise the housing will not be sealed in a water-proof

manner.

Power supply cable must be within 5 to 9 mm diameter, and relay

cable must be within 7 to 13 mm diameter, both with a round cross-

section.