User's Manual

SYMEO Local Positioning Radar System

LPR-1DXi

Product Documentation

Commissioning

Page 20 of 33

Figure 15 – Setup 2

Figure 16 – Setup 3

After finishing the installation process, you can open the LPR-1DXi Wizard via the Windows

menu.

5.2.3 Parameter setting with the Symeo Wizard

Carry out following steps with the LPR-1DXi Wizard:

1. Selection of the desired application

Settings of parameters for selected application

General setting of LPR-1DXi System (Group ID, Data Rate RS232, Measurement

Cycle)

2. Relay allocation

Relay allocation and setting of switch-off points

3. Connection to LPR-1DXi Station

Upload of selected application and parameters to the LPR-1DXi station

Download of currently applied application as backup-files

Check distance data

Start the LPR 1DXi Wizard. The following window appears: