User's Manual

SYMEO Local Positioning Radar System

LPR-1DXi

Product Documentation

Overview

Page 7 of 33

Protect the contacts of all of the device's sockets and plugs from static

electricity. Do not touch the contacts. If it is ever necessary to touch the

contacts, take the following precautionary measures: Touch a grounded

object or carry a ground strap before touching the contacts. This will divert

static charges.

Proper operation (in accordance with IEC60950/EN60950) of the device is

only assured if the housing and integral covers for mounting slots are fully

installed (electric shock, cooling, fire protection, noise suppression). If

necessary, refer to the corresponding instructions in the operating

instructions for the device.

In the case of high outside temperatures and intense, direct solar radiation

or other radiant heat, it may be necessary to provide a sun or heat shield.

1.7 System Extensions and Accessories

Data links to peripheral devices must be provided with adequate shielding.

The warranty shall be voided if you cause defects to the device by installing

or exchanging system extensions.

1.8 Additional Instructions

The LPR-1DXi unit must not be opened except for installation. The LPR-

1DXi unit contains no serviceable components.

When opening, ensure that no fluid gets into the housing. When sealing the

station, ensure that the seal is included in the cover and that the LPR-1DXi

unit is completely closed. Otherwise, moisture can penetrate the station

and damage it.

Please take note of the safety and operating instructions in the operating

instructions for the system in which you want to install the component.