User's Manual

SYMEO Local Positioning Radar System

LPR®-1D24

LPR®-1D24 Station – Overview and Mounting

Web User Interface for LPR®-1D24

LPR-1D24_Users_Manual_FCC-IC-Edition_EN.docx Page 22 of 34

7.3 Device

With this function (see picture below) you switch either to:

 Device configuration

 Application settings

 VPN remote access settings

 Firmware update

 Reboot device

Figure 12: Device Menu

Furthermore you will find on top of every page the device status (see picture below):

Figure 13: Information overview and device status

 The information overview shows you the Hostname of the LPR

-1D24 unit and its IP-

address.

 The device status shows you the status of the services and interfaces.

o The service status “Measurement Filter” and “Measurement Daemon” and also the

interface status “Binary protocol” must be green, otherwise please contact Symeo

customer support.

It takes some seconds after switching on or after a reboot before the

color changes to green. A yellow color could indicate as well an error

in the configuration settings.

 The interface status “Binary protocol” is only green if the customer is connected to the

binary port.