User's Manual

SYMEO Local Positioning Radar System

LPR®-1D24

LPR®-1D24 Station – Overview and Mounting

Web User Interface for LPR®-1D24

LPR-1D24_Users_Manual_FCC-IC-Edition_EN.docx Page 27 of 34

Figure 19 – Device: Application Settings

7.5.1 Device - Application Settings – Customer Protocol

With this function (see picture below) you chose to:

 set the Protocol frame length

 set the Protocol TCP port

 define the Output interval of customer protocol

Figure 20 – Device: Application Settings - Costumer Protocol Settings

7.5.2 Device - Application Settings – General

With this function (see picture below) you can set the LPR

-1D24 settings:

 LPR group ID

o Group identifier of one pair of LPR

units, associated together. Has to be the same on

units measuring with each other. Diverse measurement paths must also be adjusted

to different group IDs.