Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Overview
Copyright © Symeo GmbH 2010
Page 10 of 87
In the case of high outside temperatures and intense, direct solar radiation
or other radiant heat, it may be necessary to provide a sun or heat shield.
1.7 System Extensions and Accessories
Data links to peripheral devices must be provided with adequate shielding.
For LAN cabling, the requirements in accordance with EN 50173 and EN
50174-1/2 apply. Use of either a Category 5 shielded cable for 10/100
Ethernet or Category 5e shielded cable for gigabit Ethernet is a minimum
requirement. The specifications of standard ISO/IEC 11801 must be
complied with.
The warranty shall be voided if you cause defects to the device by
installing or exchanging system extensions.
1.8 Additional Instructions Regarding Compact Type and Integral
Type Stations
The Compact type LPR
®
station must not be opened except for installation.
The Compact station contains no serviceable components.
When opening, ensure that no fluid gets into the housing. When sealing
the station, ensure that the seal is included in the cover and that the
Compact station is completely closed. Otherwise, moisture can penetrate
the station and damage it.
In order to install the Integral type LPR
®
station, the hood must be
detached from the serviceable components. Refer also to the instructions
on installing the transponder.
Please take note of the safety and operating instructions in the operating
instructions for the system in which you want to install the component.