Safety Instructions
Table Of Contents
- Overview
- System Description
- Hardware
- Installation
- Commissioning
- Web Server
- Protocol Description Binary XP (1D messages)
- Trouble Shooting
- Appendix A: Agency certifications
SYMEO LPR
®
LPR-1D
Product Documentation
Hardware
Copyright © Symeo GmbH 2010
Page 18 of 87
3 Hardware
All corresponding installation, repair and servicing work must be carried out
by qualified and trained technicians.
Using beside the LPR
®
®
and installation description is provided.
3.1 LPR
®
Station (Design Compact Station)
The Compact type LPR
®
station is factory configured variously according to different
requirements:
With or without TCP/IP (ARM9 board)
With or without switching outputs for up to 7 relays
2 or 4 antenna ports
The option for additional relay outputs is not provided with 4 antenna
outputs.
Technical Data and Description of Interfaces
Power draw
Voltage range 10-36VDC
RS232 port, with / without relay: 7 W / 4 W
TCP/IP port, with / without relay: 8 W / 6 W
Dimensions (LxWxH)
260 x 160 x 91 mm
Type of protection
IP 65 with appropriate cable connectors
Connections
Power-Supply and Communication: Plugged connection
Antenna: Screwed cable gland
Ethernet: Plugged connection
Antennas
Connection of up to 4 independent antennas
Compliance
CE mark, part 15 FCC
(1)
, RSS-210
(1)
(1)
Only valid for FCC labeled stations.