Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Hardware
Copyright © Symeo GmbH 2010
Page 19 of 87
1
91
260
160
2
3
4
5
6
Figure 9 LPR
®
Station (with network interface, dry contacts and 2 antenna interfaces)
Description of Interfaces
Nr. 1
Pressure equalization membrane.
The membrane prevents forming of condensation water inside the Compact Station. The
pressure equalization membrane must not be changed or covered!
Nr. 2
Network (optional).
The standard industrial Ethernet port of the station is designed as a Harting type push pull
connector.
Nr. 3, 4
Antenna connections.
The antennas are connected to the Compact Station via a specially converted low-loss HF
cable with N-plug.
3: Antenna port no. 1,
4: Antenna port no. 2.
Nr. 5
Power supply with integrated communication ports.
Power is supplied via a Lumberg Type 0233 08 push pull connector. There is no power
switch because of the intended area of application. A 3 Ampere (slow blow) fuse is
mounted inside the Compact Station.
Nr. 6
Connection for relay outputs (optional).
The relays are connected by means of a type 0233 14 Lumberg push pull connector.