Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Hardware
Copyright © Symeo GmbH 2010
Page 20 of 87
3.1.1 PIN-Assignment of Lumberg Type 0233 08 (Power Supply, RS232-
Interface)
Overview
Pin
Function
1
UBB (+)
2
UBB (-)
3
LPR
®
data port RXD
4
LPR
®
data port TXD
5
Network diagnostic port RXD
6
Network diagnostic port TXD
7
GND-RS232
8
GND RS232
Table 1 : Solder side view of the pin assignment of the Lumberg power connector plug
(power supply with integrated service port)
For configuration of the connector with cables, you have to identify the
matching pin assignment on the solder side.
The connectors have an anti twist device.
Option 1: It is possible to order cables (length: 5 m) by Symeo with
integrated Lumberg connector and cut cable head (see chapter 3.2.1).
Option 2: It ispossible to order a connection box for wire all cables (see
chapter 0).
When plugging the push pull connectors into their sockets check that the
