Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Hardware
Copyright © Symeo GmbH 2010
Page 21 of 87
3.1.2 PIN-Assignment of Lumberg Typ 0233 14 (Relays)
Overview
1
24
3
5
6
7
8
9
10
14
13
12
11
Pin
Name
Function
1
R1P
The function of the relay 1 to 7 can be
individually programmed with the LPR
®
1D
Wizard.
2
R1N
3
R2P
4
R2N
5
R3P
6
R3N
7
R4P
8
R4N
9
R5P
10
R5N
11
R6P
12
R6N
13
R7P
14
R7N
Table 2 : Solder side view of the pin assignment of the Lumberg relay connector (relay
outputs)
For configuration of the connector with cables, you have to identify the
matching pin assignment on the solder side.
The connectors have an anti twist device.
Option 1: It is possible to order cables (length: 5 m) by Symeo with
integrated Lumberg connector and cut cable head (see chapter 3.2.2).
Option 2: It ispossible to order a connection box for wire all cables (see
chapter 0).
When plugging the push pull connectors into their sockets check that the

3.2 Cables for LPR
®
Station
3.2.1 Assembled Cable for power supply and service port
Cables are delivered with a cable length of 5m and can be cut to the required length.