Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Commissioning
Copyright © Symeo GmbH 2010
Page 44 of 87
Antenna
Port 1
Antenna
Port 2
Figure 38 – Antenna ports of LPR
®
Station
Optional: Usage of Relays
Figure 39 – Allocation of relays
If realys are used at one or more LPR
®
stations
you can allocate functionalities to each relay
depending on the selected application.
If the relay selection is
skipped no relays are switch
at the LPR
®
station
You can choose between default settings,
customer settings and no relay.
The possible functionalities
of the relays depends on the
application you have
selected.
Connection to LPR
®
Station
Figure 40 – Connection to LPR
®
station
Having established a connection to the LPR
®
station as described in chapter 5.2 and 5.3 the
connection can be opened.
If you are connected to the
LPR
®
station with TCP/IP
interface, you choose this
connection type. For serial
connection you choose
RS232.